What to Do When Car Wipers Stop Moving?

1 Answers
Allie
07/29/25 9:19pm
When the wipers stop moving, you need to open the hood to check if the transmission linkage is dislocated. If the transmission linkage is dislocated, it should be repaired promptly. Below is a detailed introduction about car wipers: 1. Overview: Wipers, also known as windshield wipers, are devices used to remove raindrops and dust attached to the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety. 2. Function: Composed of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly, their main function is to clear rain, snow, and dust that obstruct the view on the windshield. The intermittent flexible wiper can be adjusted by the driver according to the intensity of the rain and visibility conditions.
Was this review help?
19
3
Share
More Forum Discussions

How to Maintain a Used Car?

Here is some relevant information about used car maintenance: 1. Replace fluids promptly. After purchasing a used car, it should be treated like a new car, and many 'fluids' need to be replaced, such as transmission fluid, brake fluid, engine oil, coolant, etc. Additionally, when changing the engine oil, the oil filter should also be replaced. 2. Tire inspection. Tires are crucial as they are the 'feet' of the car. During inspection, pay close attention to the tread patterns and cleanliness of the tires, and ensure their grip capability. Some tires may appear new with deep treads, but the rubber may have already aged, which should not be overlooked.
16
3
Share

What car has a logo with four hearts?

The logo with four hearts belongs to the high-performance Quadrifoglio models under Alfa Romeo. Alfa Romeo is a renowned Italian manufacturer of sedans and sports cars, founded in 1910 and headquartered in Milan. In 1986, Alfa Romeo was acquired by the Fiat Group (FIAT), and in April 2017, Alfa Romeo officially entered the Chinese market. Taking the 2020 Alfa Romeo Giulia as an example: it maintains the classic appearance of Alfa Romeo, with several new exterior colors available, features an 8.8-inch touchscreen, and is also equipped with the SAE Level 2 driving assistance system.
15
0
Share

What is the ground clearance of the Chevrolet Orlando?

The ground clearance of the Chevrolet Orlando is 167mm. Here is an introduction to the Chevrolet Orlando: 1. The Orlando is a compact SUV launched by Chevrolet; 2. The minimum ground clearance of this car is quite average, but the chassis tuning is relatively comfortable, which aligns with the car's positioning. Below is additional information about a car's minimum ground clearance: 1. It refers to the vertical height between the chassis and the ground when the car is at maximum load; 2. The minimum ground clearance of a car represents its passability. The greater the minimum ground clearance, the better the car's passability; the smaller the ground clearance, the worse the car's passability.
16
3
Share

How to Use D/S Gear?

Both D gear and S gear in a car are forward gears. Use D gear for normal driving, and S gear can be used for overtaking and acceleration. More information about the gears is as follows: P: Parking gear, start gear. Prevents the car from rolling. R: Reverse gear. Used when reversing. N: Neutral gear. Used for temporary parking. D: Drive gear, forward gear. The transmission automatically shifts between 1st to 5th gears based on speed and throttle conditions. S: Sport mode. When this gear is engaged, the gears can be freely switched, but it increases fuel consumption. L: Low gear. The transmission stays in 1st gear and does not upshift, providing some braking function when going downhill, and can be used in situations like slopes.
12
4
Share

What are the reasons for stalling during the start in Subject 3?

Subject 3 stalling during the start reasons are as follows: 1. Releasing the clutch too quickly. The solution is to slowly release the clutch, pause momentarily when the car moves slightly, and then continue to release the clutch gradually. Also, during the start, students must avoid turning the steering wheel. If a turn is necessary, it should be done after the car starts moving. 2. Starting the engine in gear. This very basic mistake is mainly caused by nervousness during the exam, so students should develop the habit of starting the engine in neutral while learning to drive. 3. Forgetting to release the handbrake. Forgetting to release the handbrake at the start can cause the car to stall. Additionally, the handbrake must be fully released. Also, when in first or second gear, pay attention to the braking force and match the clutch if the speed is slow.
20
1
Share

What does the lock mode of a four-wheel drive vehicle mean?

Four-wheel drive vehicle lock mode refers to the four-wheel drive being turned off. This mode is only used for special road conditions such as ice, snow, gravel, and mud, and can be used when the vehicle is stuck. During normal driving, this function must be turned off, otherwise it may cause damage to the four-wheel drive system components. If this function is turned on during normal driving, there will inevitably be a speed difference between the front and rear wheels when the vehicle turns. In this state, the four-wheel drive system will forcibly synchronize the speeds of the front and rear wheels, leading to interference in the four-wheel drive power and ultimately causing damage to the four-wheel drive system components, as well as generating noise during driving.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.