What to Do When Car Windshield Wipers Don't Clean Properly?

1 Answers
LeJoanna
07/24/25 4:34pm
Solutions for car windshield wipers not cleaning properly are: 1. Wet the glass with water, evenly apply toothpaste on the glass, gently scrub with a sponge, then rinse clean; 2. Dilute windshield washer fluid with water, pour it into a spray bottle, spray on the glass, and wipe clean with a soft, lint-free cloth; 3. Spray a little water on the glass and wipe it back and forth with old newspapers. The classification and functions of car glass are: 1. Laminated glass: A transparent adhesive plastic film is placed between two or three layers of glass, enhancing the glass's resistance to breakage; 2. Tempered glass: Ordinary glass is quenched to form certain internal stresses. When impacted and broken, the glass splits into small fragments with blunt edges, reducing the risk of injury to passengers.
Was this review help?
12
1
Share
More Forum Discussions

Can a lost car remote be reprogrammed?

It is possible to reprogram a remote key for a lost car remote. Remote Key Deactivation: When a car key is lost, the first step is to visit a local car 4S store to deactivate the remote key, removing the data of the lost key from the car's anti-theft control unit. Reprogramming a car key requires a professional to match the new key with the anti-theft controller in the original car. Once the matching is completed, the new key can be activated, and the lost key will become invalid. Key Reprogramming Process: Every car comes with an anti-theft password configured with the vehicle. The owner only needs to provide the vehicle license and identity information to the 4S store, which can then retrieve the vehicle's anti-theft password based on the provided information and configure a new key.
1
5
Share

Is it illegal to change the color of headlights?

Changing the color of headlights is not illegal, but it must comply with standards. Automobile modification regulations: Changing the brand, model, and engine type of a motor vehicle, except for engines that are permitted for optional installation by the competent department of motor vehicle products under the State Council, or altering the registered appearance and relevant technical data of a motor vehicle, unless otherwise stipulated by laws, regulations, and national mandatory standards. Modifying headlights is considered an act of altering the appearance of a vehicle and is difficult to pass during annual inspections. Precautions for modifying headlights: Do not change the color of taillights, as this is an extremely irresponsible practice for driving safety. When modifying headlights, avoid excessively adjusting the brightness, as this can cause unnecessary accidents during night driving. Also, avoid making the headlights too "flashy," as this can look awkward and may actually reduce the aesthetic appeal of the car.
1
3
Share

What lights must be turned on when driving in foggy weather?

When driving in foggy weather, the following lights need to be turned on: 1. In heavy fog, you should turn on your position lights and headlights. If your vehicle is equipped with fog lights, both front and rear fog lights should be activated, as fog lights have strong penetration and can help other vehicles identify your car more easily. 2. In addition to turning on the fog lights, you should also activate the hazard warning lights (double flashing lights), as the flashing can serve as a warning. Just remember to switch them off when making turns. Below are some precautions regarding the use of fog lights: Fog lights are brighter than regular vehicle lights and have strong scattering effects, so they should not be turned on when not needed. Otherwise, they may interfere with the vision of other drivers, especially those of oncoming vehicles, and in severe cases, could lead to accidents.
10
3
Share

Can Someone Else Renew My Driver's License for Me?

Renewing a driver's license can be done by a proxy. Proxy Process: If you are authorizing an agent to renew the license, you need to provide the agent's identity proof, the original ID card of the motor vehicle driver who needs to renew the license, a copy of the ID card, the original driver's license (both the main card and the supplementary card), three one-inch white-background color-printed ID photos, and a medical examination form from a county-level hospital. The agent should go to the license renewal window at the vehicle management office and follow the instructions of the staff to complete the renewal process. Finally, the renewed license will be mailed to the driver. License Renewal Methods: When you need to renew your driver's license, there are three ways to do it: self-renewal by the motor vehicle driver, renewal by an authorized agent, or online renewal.
4
0
Share

Which cars use Bosch R6 spark plugs?

Bosch-produced spark plugs are generally used in German cars such as Volkswagen, Mercedes-Benz, and Audi. Functions of Bosch spark plugs: As high-grade spark plugs for ordinary engines, Bosch spark plugs feature a fine iridium center electrode, achieving superior ignition performance and significantly improving sensitivity. Additionally, the electrode discharge part uses platinum, resulting in a longer service life than platinum spark plugs. Bosch spark plugs ensure stable sparking, enhancing engine operation stability and smoothness. Due to the hardness of iridium, they are more durable than ordinary spark plugs. Spark plug lifespan: The service life of spark plugs can exceed 80,000 kilometers, but their condition should be checked during every major maintenance. The most common issue with spark plugs during use is carbon buildup, which can be cleaned with carburetor cleaner before reinstalling them.
1
5
Share

How Often Should the Brake Pads of a Rear Eight-Wheeler Be Replaced?

Rear eight-wheeler brake pads are generally replaced every 30,000 kilometers or so. The relevant introduction to replacing brake pads is as follows: Method for replacing brake pads: Remove the tire to expose the brake caliper and brake disc. Apply lubricant to the gaps of screws or nuts that need to be loosened and removed. Hang the brake caliper with a rope, then remove the old brake pads. Lift the engine hood and unscrew the cover of the brake fluid box. Align and embed the new brake pads, placing the inner piece with the wear warning indicator on the inside. Precautions for replacing brake pads: Check whether the replacement brake pads are genuine parts (i.e., matching products), the integrity of the product packaging, whether the anti-counterfeiting marks and packaging labels are consistent with those on the brake pads, and whether the product model matches the content of the certificate.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.