What to Do When Car Window Glass Makes Noise on Bumpy Roads?

2 Answers
VanNaomi
07/28/25 11:43pm
Here are some solutions for addressing the issue of car window glass making noise when driving on bumpy roads: 1. Loose door screws or lifting bracket. To fix this issue, simply take the car to a 4S shop and have the staff tighten the loose door glass. When driving on bumpy roads, the car window glass may make noise, which is often caused by loose internal fastening screws or a detached lifting bracket. 2. Aging window glass sealing rubber strip, best to replace it directly. Aging door glass rubber strips are often one of the reasons for window noise. If the noise occurs in a new car, there's no need to replace the rubber strip immediately. Instead, purchase a lubricant online, apply it evenly on the rubber strip, and then try raising and lowering the window several times to see if the noise reduces. 3. Debris in the window glass guide rail. The solution is to use tools to clean out the debris in the guide rail.
Was this review help?
12
3
Share
McNadia
08/12/25 4:02am
The window rattles on rough roads, and I often encounter this issue myself. Start with basic troubleshooting: check the sealing strips around the window for cracks or deformations, as aging can cause friction noises. If the strips are fine, use a vacuum cleaner to remove dust or debris from the window tracks, as these can collide and make noise when driving over bumps. Regularly apply silicone grease to the tracks to reduce friction. The screws inside the door might be loose—tighten them with a small wrench, but avoid over-tightening to prevent damage. A quick pre-drive check can help prevent the noise from worsening. Ignoring it may lead to further damage to the seals, causing the window to jam or leak rain, reducing comfort. It’s recommended to perform a monthly routine check—developing this habit can save you time and money by reducing trips to the repair shop.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

What is the top speed of a Jeep?

Jeep's top speed is 100 km/h. Introduction to Jeep: Jeep is an American automobile brand, owned by the world's second-largest car manufacturer, Daimler-Chrysler. Jeep is a mid-range car, not too expensive but not too cheap either. It's a low-key choice with high cost-effectiveness, strong operability, and stability. However, the models are relatively large, making them more suitable for drivers of certain age groups. Jeep's vehicle lineup: Includes models like the Grand Cherokee, Wrangler, Compass, Cherokee, Renegade, and Commander. Among them, the Compass is an SUV with an on-demand four-wheel-drive system, while the Wrangler is an off-road vehicle with a part-time four-wheel-drive system.
6
3
Share

Under what circumstances does the right exhaust of the BMW X5 open?

The right exhaust of the BMW X5 automatically opens when the engine speed is high. Function of the exhaust system: It mainly ensures that the water and exhaust gases produced after fuel combustion can be discharged, providing favorable conditions for the next combustion. The BMW X5's exhaust system uses a variable valve, so when the engine speed is relatively low, the valve closes, allowing the airflow to pass through a smaller pipe diameter and be discharged through a single pipe. Introduction to the exhaust pipe valve: The car's exhaust system cannot blindly pursue smoothness because backpressure is related to the engine's low-speed torque, which is the torque range most commonly used in daily driving. Therefore, the exhaust system must have corresponding devices to ensure backpressure at low speeds, and this is where the backpressure muffler comes into play.
7
5
Share

What does Honda SCS short circuit mean?

The meaning of Honda SCS short circuit is that the circuit needs to be checked. Composition of SCS: The SCS type electronic truck scale is a digitally displayed electronic weighing instrument. The SCS series electronic platform scale mainly consists of a weighing platform, load cells and connectors, junction box, weighing display, etc. It includes: ABS - Anti-lock Braking System, TCS - Traction Control System, CBC - Cornering Brake Control, MSR - Engine Drag Torque Control, EBD - Electronic Brakeforce Distribution, VSC - Vehicle Stability Control, etc. Working principle of SCS: The electronic truck scale uses the strain gauge measurement principle for weighing. Strain gauges are attached to the elastic body of the load cell to form a Wheatstone bridge. When there is no load, the bridge is in a balanced state with zero output. When the elastic body bears a load, each strain gauge generates strain proportional to the load, and the external load can be measured from the output voltage.
11
2
Share

What does dispclock mean on the Teana car?

Dispclock on the Teana car is the head-up display activation button. When pressed, a transparent projection display device will appear in front of the vehicle's instrument panel. The function of the head-up display: The head-up display, abbreviated as HUD and also known as the heads-up display system, is a driver-centered, blind-operation, multi-functional instrument panel. Its purpose is to project important driving information such as speed and navigation onto the windshield in front of the driver, allowing the driver to view crucial driving information like speed and navigation without having to lower or turn their head. Classification of head-up displays: Suspended HUDs are fixed on the sun visor above the car driver, resulting in the HUD information being projected onto the upper area of the windshield. Dashboard-mounted HUDs, on the other hand, are fixed on the central console in front of the driver, which means the HUD information will be projected onto the front area of the windshield.
2
2
Share

What Causes the Loud Engine Noise When Accelerating in Borui?

Borui acceleration engine noise is caused by the following reasons: Exhaust system malfunction: The symptom is a hissing sound from the engine, similar to steam or air escaping from the engine. For example, when there is a leak in the intake or exhaust pipe, the vehicle will produce a loud roaring noise as the exhaust rate increases during acceleration. Engine malfunction: If the throttle is dirty and blocked, preventing it from opening to the optimal position, it will result in poor air-fuel mixture ratio in the engine, causing noise during acceleration. When pressing the accelerator, you may notice poor acceleration, lack of power, and a hysterical sound from the engine. This is most likely to occur when the engine is hot, cold, or running low on oil. If the engine speed increases but the vehicle speed rises very slowly, this is usually a sign of clutch slippage, and the clutch kit needs to be replaced.
11
5
Share

What causes the BMW 740's electric fan to continuously run at high speed?

Possible causes include excessively high coolant temperature, excessively high transmission oil temperature, excessively high air conditioning pressure, damaged air conditioning pressure sensor; issues with the wiring from the sensor to the JBE; internal damage to the electronic junction box (JBE) causing false reporting of air conditioning pressure. Speed principle: If the engine temperature remains within a relatively low range, the fan speed will naturally decrease. If the engine temperature consistently stays within a higher range, the fan speed will increase. It is necessary to check the relationship between engine temperature and fan speed. If it follows the above sequence, there should be no problem; if not, further inspection is required. Cooling system: The function of the automobile cooling system is to maintain the vehicle within an appropriate temperature range under all operating conditions. It consists of the cooling fan, expansion tank, thermostat, water jackets in the engine block and cylinder head, and related components.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.