What to Do When Car Seat Cushions Are Full of Powder?

1 Answers
OJackson
09/08/25 2:17am
Seat cushions and covers cleaning tip: Both dry cleaning and hand washing are acceptable, with dry cleaning yielding the best results. When hand washing, use low-alkaline detergent and avoid bleach or chlorine-based cleaners to prevent color fading. Before hand washing, it's best to soak the items in warm water at 30-40 degrees Celsius for 10 minutes to improve cleaning effectiveness. During hand washing, use a soft brush with detergent to gently scrub, but avoid excessive force to prevent pilling of the seat cushions and covers.
Was this review help?
4
2
Share
More Forum Discussions

Should You Warm Up the Car Before an Oil Change?

It is recommended to warm up the car for about 5 minutes before changing the oil, as this helps drain the old oil more thoroughly. The benefits of warming up the car before an oil change include: 1. Oil is a viscous liquid, and at lower temperatures, its viscosity increases, making it harder to flow out when the oil pan drain plug is removed; 2. There may be sludge in the engine, which softens when the car is warmed up, allowing it to be expelled along with the old oil. Engine oil, also known as motor oil or engine lubricant, is a substance enhanced with additives in base oil, primarily containing anti-wear agents, detergents, dispersants, and multi-grade viscosity index improvers. Engine oil is used for lubricating internal combustion engines.
4
4
Share

Why is there a gasoline smell when the car is just started?

The reasons for the gasoline smell when the car is just started: 1. Insufficient intake of the throttle valve; 2. Problems with the carbon canister or carbon canister solenoid valve, causing the mixture to be too rich; 3. Excessive carbon deposits inside the engine, resulting in poor mixture atomization; 4. Leakage from the fuel injector. The specific cause needs to be checked at a 4S shop or a professional auto repair shop. A strong gasoline smell when starting the car is usually normal if it disappears after the engine warms up, because the combustion effect is poor when the car is just started. During a cold start, the water temperature and the temperature of the exhaust pipe are low, and the mixture is relatively rich at this time, so some of the mixture cannot be fully burned and is discharged through the exhaust pipe, which causes the noticeable gasoline smell. This is a normal phenomenon.
4
1
Share

Which brand does Bestune belong to?

Bestune belongs to FAW (China First Automobile Works) and is an independent brand. Bestune is a business sedan with outstanding performance and superior quality. The design philosophy and integrated application of new technologies in this vehicle not only endow it with world-class quality but also excellent safety and handling performance among mid-to-high-end sedans. The Bestune B70 adopts a popular large-mouth structural design, with the radiator grille assembly and water tank mask changing from the original 3 double-layer decorative strips to 5 single-layer decorative strips, giving the front face a more substantial and business-oriented appearance. This model is equipped with pre-tensioned seat belts, anti-glare interior rearview mirrors, front positive and side airbags, side air curtains with optimized deployment performance, and anti-whiplash front seats.
20
0
Share

Should the handbrake be pulled up or released when driving?

When driving, the handbrake should be released. It needs to be pulled up when parking. The professional term for the handbrake is auxiliary brake, which operates differently from the main brake system. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use will reduce its effectiveness, and the handbrake's travel distance will increase. When the handbrake is pulled, it utilizes a hydraulic auxiliary cylinder to drive the movement of the main hydraulic cylinder beneath the vehicle, which then activates the air valve. Once the air valve is engaged, it applies braking force to the drive shaft. The handbrake only brakes the drive shaft. As a frequently used system, proper and correct usage of the handbrake ensures smoother operation in the future.
4
4
Share

Is the 2019 Magotan compliant with China VI emission standards?

The 2019 Magotan is compliant with China VI emission standards, although some models still adhere to the China V standard. Automobile emission standards are established to limit the production of harmful gases such as carbon monoxide (CO), hydrocarbons and nitrogen oxides (HC+NOx), particulate matter (PM), and soot from vehicle exhaust. The Magotan is a mid-size sedan under the Volkswagen brand. It is equipped with three engine options: a 1.4-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. The 1.4-liter turbocharged engine delivers a maximum power of 110 kW and a maximum torque of 250 Nm. The low-power 2.0-liter turbocharged engine produces a maximum power of 137 kW and a maximum torque of 320 Nm. The high-power 2.0-liter turbocharged engine generates a maximum power of 162 kW and a maximum torque of 350 Nm.
2
5
Share

What are the symptoms of car transmission slippage?

Symptoms of car transmission slippage: 1. When starting, pressing the accelerator pedal results in high engine RPM but slow vehicle acceleration; 2. During driving, pressing the accelerator deeply leads to very slow speed increase; 3. When climbing a slope, the engine RPM is high but the car moves forward slowly; 4. When shifting into a certain gear while the vehicle is in motion, the engine RPM suddenly increases but the speed improves slowly. Working principle of car transmission: Each gear has a different transmission ratio, equivalent to the meshing of small and large gears that can produce different rotation speeds. Low transmission ratio is used for low-speed driving, where the main shaft speed is lower than the engine speed to obtain greater driving force. High transmission ratio is used for high-speed driving, where the main shaft speed is higher than the engine speed to reduce traction and achieve higher speed. Shifting gears means selecting different-sized gears to mesh with the main shaft gear.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.