What to Do When Car Rims Get Scratched?

1 Answers
AbelFitz
07/29/25 8:52pm
Car rims get scratched the treatment is: 1. Check the scratches. If the damage does not reach the inner side of the hub, it can be simply repaired. Use paint thinner to wipe around the scratches to remove dirt; 2. For deeper scratches where dirt is hard to remove, use a toothpick to clean it thoroughly; 3. To avoid accidentally painting unrelated areas, carefully apply masking tape around the scratches; 4. Prepare the brush tip, apply touch-up paint, and after the paint dries and slightly shrinks, apply it slightly raised; 5. After application, it takes about a week to dry completely. Once dry, use waterproof paper dipped in soapy water to smooth the surface.
Was this review help?
4
4
Share
More Forum Discussions

What documents and procedures are required for licensing a used motorcycle?

To transfer the ownership of a used motorcycle, the first step is to obtain a unified used vehicle sales invoice from the used vehicle market. Then, take the invoice to the nearest district vehicle management office to complete the motorcycle licensing process. Below is more information about used vehicles: 1. The necessity of used vehicle ownership transfer: Completing the ownership transfer legally ensures the transfer of vehicle ownership, guarantees the legality of the vehicle's source (e.g., avoiding purchasing smuggled or stolen vehicles), and clarifies the division of responsibilities between the buyer and seller regarding the vehicle, such as debt disputes and traffic violations, thus protecting the legitimate rights and interests of both parties. 2. Conditions for used vehicle ownership transfer: The vehicle must have a legal source and proper documentation, no outstanding bank liens or court seizure records, no unresolved traffic violations or accident records, no outstanding fee arrears, and all required documents must be complete.
2
3
Share

How to adjust the clock on the Tiggo 3?

First, turn off the ignition switch and set the headlight switch to the first gear position. Then press and hold the adjustment button until the hour field flashes, then release it. Adjust the clock by pressing the adjustment lever. After setting the hour, do not move it; it will automatically switch to the minute field flashing. Then adjust the minutes by pressing the adjustment lever. Once everything is set, release the button. Below is some related information about the Chery Tiggo 3: 1. Certain adjustments have been made to the safety features. The ESP electronic stability system, EBA brake assist control system, and TCS traction control system, which were standard on older models, are no longer standard on the 1.6L manual comfort model and the 1.6L CVT comfort model. 2. In terms of power, the 1.6L naturally aspirated engine (model SQRE4G16) used in the current model will continue to be adopted, with a maximum output power of 93kW (126PS) and a peak torque of 160N·m. The transmission system is matched with a 5-speed manual and CVT gearbox.
19
5
Share

How Fast Can a 50cc Motorcycle Go?

A standard domestically produced 50cc moped can reach speeds of up to 60km/h, while an imported two-stroke engine 50cc motorcycle can reach speeds of up to 85km/h. Here are the detailed explanations: 1. Two-stroke motorcycle: The thermal part mainly consists of components such as the cylinder head, cylinder, piston, and piston rings. The thermal part of a four-stroke motorcycle mainly consists of the cylinder head, cylinder head cover, cylinder, piston, piston rings, and the valve train. The valve train includes components such as valves, valve guides, valve seats, valve springs, camshafts, timing chains, timing sprockets, chain tensioners, and rocker arms. Comparatively, two-stroke motorcycles are smaller in size, simpler in structure, lighter in weight, and easier to manufacture and maintain than four-stroke motorcycles. 2. Four-stroke motorcycle: Generally refers to a two or three-wheeled motor vehicle powered by an engine and steered by handlebars controlling the front wheel. A four-stroke motorcycle is a small two or three-wheeled motor vehicle powered by a four-stroke gasoline internal combustion engine.
17
4
Share

Brief Introduction to Safe Driving Techniques in Fog

When driving in foggy conditions, always observe the surroundings of the vehicle and use the car's lights correctly. The following are safe driving techniques in fog: 1. Turn on fog lights: When driving in fog, turn on the fog lights and low beams, but avoid using high beams. The high beams, with their elevated light, can be refracted by the dense fog and easily shine into the eyes of oncoming drivers, blurring their vision. 2. Use the horn frequently: Frequently honk the horn to alert pedestrians and other vehicles. Upon hearing another vehicle's horn, respond immediately to indicate your vehicle's position. 3. Maintain a safe distance: Drive at a low speed in fog and keep a sufficient safe distance from the vehicle ahead. 4. Stay towards the middle of the road, not the edge: Avoid driving along the roadside to guard against roadside drainage ditches. 5. Do not wipe the windshield while driving: In heavy fog, the condensation on the curved windshield can further impair your limited visibility. Consider using the windshield wipers to remove condensation from the front windshield. If you need to wipe the fog off the windshield manually, stop the car first and then wipe it. Never wipe while driving.
14
4
Share

What to Do If the Car Is Not Driven Frequently?

There are several points to note if the car is not driven for a long time: 1. Keep the fuel tank as empty as possible: Among the quality indicators of gasoline, there are two key indicators—actual gum and induction period—which represent the stability of gasoline. Gasoline that is stored for too long will oxidize severely, forming gum. 2. Inflate the tires adequately: Prolonged parking without movement can cause localized pressure on the tires, which may eventually render them unusable. The best way to avoid this is to periodically adjust the position of the tires during parking to distribute the continuous pressure on specific areas. 3. Disconnect the battery to prevent power drain: After long-term parking, a previously normal car may have difficulty starting. The battery usually charges automatically while driving, but it will still discharge when the car is idle. However, the discharge rate varies depending on the battery model, usage time, and type, so it's necessary to check the battery condition accordingly. 4. Take reasonable protective measures to prevent external damage: If the parking location is not ideal before long-term parking, appropriate protective measures should be taken for the vehicle. 5. Park on level ground: If the car is to be parked for an extended period, choose a suitable parking spot to ensure all four wheels are on the same plane. Avoid situations where a single wheel is on a curb.
14
4
Share

Is coasting in neutral or coasting in gear more fuel-efficient?

Between coasting in neutral and coasting in gear, coasting in gear is more fuel-efficient. Coasting in neutral: This involves shifting into neutral and letting the car glide forward by inertia. It's important to note that coasting in neutral is only applicable to automatic transmissions; manual transmissions should never coast in neutral. When a manual transmission is in neutral while moving, the transmission is still operating, and the lack of lubrication can cause wear. Coasting in gear: The engine is between low-speed fuel cutoff and high-speed fuel cutoff. At this point, the onboard computer detects that the car is idling, but the speed is higher than the engine RPM, so the computer will stop the fuel supply to the engine. Precautions for using a car engine are as follows: 1. Avoid driving in neutral: The engine itself has a deceleration fuel cutoff function, and driving in neutral is not conducive to fuel economy. 2. Pay attention to observation when using the vehicle: If you find oil on the ground, determine whether there is an engine oil leak and communicate with the car dealership promptly to eliminate safety hazards. 3. Do not turn off the engine immediately after high-speed driving or climbing a hill: For cars equipped with turbochargers, let the engine idle for 10 minutes before shutting it off. Turbocharged cars accumulate carbon deposits several times faster than naturally aspirated cars. 4. If water is mixed into or absorbed by the brake fluid: Replace or carefully filter it promptly; otherwise, it may cause insufficient braking pressure, affecting braking performance.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.