What to Do When Car Rearview Mirrors Have Water on Rainy Days?

2 Answers
LePeyton
07/29/25 3:14am
Solutions for water on car rearview mirrors on rainy days: 1. Install rearview mirror rain guards or covers; 2. Apply soap to the mirror: Rub a wet cloth with soap on the mirror, wait for it to dry, then gently wipe off any residue with a tissue; 3. Use a water repellent: The main component of water repellent is silicone oil, which changes the surface tension of water on the glass to prevent water from sticking to the rearview mirror; 4. Install electrically heated rearview mirrors. Car rearview mirrors reflect the conditions behind, beside, and below the vehicle, allowing the driver to indirectly see these areas. They act as a second pair of eyes, expanding the driver's field of vision. Rearview mirrors are divided into exterior mirrors, lower mirrors, and interior mirrors.
Was this review help?
7
4
Share
Brayden
08/12/25 7:06am
I have plenty of experience dealing with water droplets on rearview mirrors after rain. The simplest solution is to turn on the mirror heating function—the button is usually located with the windshield heater. Just turn it on for a few minutes, and the droplets will evaporate. For cars without heating, you can try a water repellent spray. After applying and wiping it evenly, rainwater will bead up and roll off. A bottle from the supermarket costs just over ten yuan and lasts a long time. In a pinch, rubbing a bar of soap back and forth on the mirror and then rinsing it off can also help prevent water buildup. Another handy trick is installing rain deflectors—these small plastic accessories don’t obstruct your view and keep rain off the mirrors. Also, avoid rolling down your windows too much while driving to prevent rainwater from splashing onto the mirrors. I’ve tried all these methods during the rainy season, and the most hassle-free one is applying water repellent in advance.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Can You Drive After Drinking a 330ml Beer?

Drinking a 330ml beer requires 8 to 12 hours before you can drive, as studies show that consuming one beer can result in a blood alcohol concentration (BAC) of approximately 40mg to 60mg, which constitutes the illegal act of drunk driving. Typically, the body can only metabolize 10 to 15 milliliters of alcohol per hour. Therefore, under normal circumstances, it takes about 8 to 12 hours for the alcohol from one beer to be completely metabolized and for the body to return to a normal state. Specific methods to quickly reduce alcohol levels in the body: 1. Hot shower: Taking a hot shower after drinking can promote blood circulation and help metabolize alcohol in the body. 2. Exercise: If the alcohol level is not too high, engaging in physical activity can boost blood circulation and rapidly lower alcohol levels. However, this method is not suitable if intoxication is severe and accompanied by dizziness. 3. Drink plenty of water: Alternatively, drinking milk or honey can effectively help sober up.
9
3
Share

What does the CRUISE button on the steering wheel mean?

cruise refers to the car's electronic cruise control system, which mainly consists of four parts: the command switch, sensors, the cruise control system ECU, and the throttle actuator. The CRUISEMAIN light on the dashboard is the cruise control switch indicator. Pressing the CRUISEMAIN button on the steering wheel will illuminate the green CRUISEMAIN indicator on the dashboard, indicating that the cruise control switch is turned on. You can freely set the vehicle to maintain any speed above 60 km/h. Here are some precautions when using the cruise control system: 1. In heavy traffic: Or when driving on slippery roads such as rain, ice, or snow, or during strong wind and heavy rain, do not use the cruise control system for safety reasons. 2. Turn it off when not in use: To avoid accidental activation of the cruise control system, always turn off the cruise control switch when the system is not in use. 3. When driving on steep slopes: When driving on steep slopes, immediately turn off the cruise control system. Otherwise, it may cause excessive engine speed fluctuations, potentially damaging the engine.
3
1
Share

What Are the Influencing Factors of the Optimal Ignition Timing Advance Angle?

The most significant factor affecting the ignition timing advance angle is engine speed. As the speed increases, the time required to rotate through the same angle decreases, necessitating a larger advance angle to achieve the corresponding advance time. Theoretically, the minimum ignition advance angle is 0 degrees, but to prevent igniting the air-fuel mixture during the power stroke (which would result in power loss), it is typically set above 5 degrees—this is also the angle required for starting speed. The maximum ignition advance angle should not be excessively large, generally not exceeding 60 degrees; otherwise, issues such as vibration and temperature rise will become prominent, and efficiency will decline. In practice, the speed is limited by the crankshaft structure. The effects of non-optimal ignition timing include: 1. Over-advanced ignition: Causes knocking, obstructs piston upward movement, reduces efficiency, and increases thermal load, mechanical load, noise, and vibration. 2. Excessively delayed ignition: Makes gas power generation difficult, increases fuel consumption, reduces efficiency, and results in louder exhaust noise. Both over-advanced and delayed ignition will hinder speed improvement. The optimal ignition angle is influenced by the following factors: 1. Cylinder temperature and pressure: Higher values lead to faster combustion, requiring a smaller ignition advance angle. Factors affecting cylinder temperature and pressure include engine compression ratio, ambient temperature, cylinder temperature, and load. 2. Gasoline octane rating: Higher octane ratings indicate stronger anti-knock performance, allowing for a larger ignition advance angle.
8
1
Share

How many kilometers should a sedan's transmission fluid be replaced?

Different types of transmissions in cars require different intervals for changing the transmission fluid. The specific replacement intervals are as follows: 1. Automatic transmission fluid: Generally, automatic transmission fluid needs to be replaced every 40,000 to 60,000 kilometers. 2. Manual transmission fluid: The service life is relatively longer because manual transmissions have a simpler structure and mature technology, allowing for replacement every 60,000 to 80,000 kilometers. Information about transmission fluid is as follows: 1. Transmission fluid: It is an oil product used to keep the gear system clean, ensuring the normal operation of the transmission and extending the lifespan of the transmission components. 2. Classification: (1) Automatic transmission fluid: Abbreviated as ATF (Automatic-Transmission-Fluid), it is specifically designed for automatic transmissions. (2) Manual transmission fluid: Commonly referred to as gear oil. Based on its quality level, the American Petroleum Institute categorizes automotive gear oil into five grades (GL-1 to GL-5). GL-1 to GL-3 have lower performance requirements and are used for lubricating spur and bevel gears under general loads, as well as gears in transmissions and steering mechanisms.
3
2
Share

What is a 'pure water' car?

Pure water cars are smuggled vehicles that cannot be registered. Smuggled vehicles refer to those that have not been imported through the country's normal import channels and have not paid taxes, also known as untaxed imported vehicles. To determine if a vehicle is smuggled, check for any abnormalities in the body parts, especially the identification numbers. Below are the legal penalties for dealing with smuggled vehicles: 1. Illegal purchase: According to Article 155 of the Criminal Law, 'illegally purchasing other goods or items imported through smuggling directly from smugglers in relatively large quantities' refers to knowingly purchasing smuggled goods or items from smugglers with a tax amount of more than 50,000 yuan; 2. Illegal sale: Directly purchasing nationally prohibited imported items from smugglers, or transporting, purchasing, or selling nationally prohibited imported or exported items within inland waters or territorial seas, shall be convicted and punished according to Articles 151, 152, and 347 of the Criminal Law, depending on the type of smuggled items.
17
2
Share

How to Register for a Driver's License?

There are three registration methods: 1. Register at a driving school; 2. Register at the vehicle management office; 3. Register online. Required documents for applying for a motor vehicle driver's license: Applicants need to provide their original and photocopied household registration book, ID card, and temporary residence permit (if applicable), as well as prepare nine one-inch bareheaded ID photos, which will be used on the license later. If you reside long-term in your household registration location, you should apply locally. If you live outside your household registration location, you can apply at your current residence. Foreign nationals should also apply at their place of residence. To obtain a driver's license, you first need to fill out a form and undergo a physical examination. After the exam application is accepted, you will start learning relevant knowledge and driving skills until the exam date. Once all exams are passed, the vehicle management office will issue the driver's license.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.