What to Do When Car Coolant Boils Over?

1 Answers
LaMalia
07/30/25 9:35am
The solutions for car coolant boiling over are: 1. It is recommended to pull over and let the engine idle for a while; 2. Open the hood to increase air circulation and lower the water temperature. The reasons for car coolant boiling over are: 1. The engine temperature is too high; 2. Poor coolant circulation, clogged radiator core tubes, or collapsed hoses; 3. High-pressure gas from the engine combustion chamber enters the coolant passage through cracks or gaps. The functions of car coolant include: 1. Providing antifreeze protection for the engine against low-temperature environments; 2. Preventing the coolant from freezing and cracking the radiator or damaging the engine cylinder block and cylinder head during cold winter parking; 3. Offering efficient heat dissipation.
Was this review help?
13
3
Share
More Forum Discussions

Why can't the trunk of Kia K3 be opened?

The reasons and solutions for the Kia K3 trunk not opening are: 1. The car is not unlocked: If the car is in a locked state, the doors and trunk will be locked, making it impossible to open. In this case, simply unlocking the vehicle will allow the trunk to open normally. 2. The trunk latch is stuck: If the trunk latch is stuck, the trunk may be difficult to open due to friction. In this situation, applying lubricant to the latch position can help. 3. The trunk latch is deformed: If the car has been impacted, causing the trunk latch to deform, the trunk may also fail to open. In this case, the latch needs to be repaired or replaced with a new one.
4
3
Share

Is the Axela a hatchback or a sedan?

Axela is available in both hatchback and sedan versions. The hatchback is more practical, while the sedan resembles a traditional car. Introduction to Hatchbacks: A hatchback is a car configuration where the passenger compartment and the trunk are combined into a single unit, with the engine placed separately. This layout increases interior space but reduces trunk space accordingly. Therefore, it is commonly used in small and compact cars. Features of Hatchbacks: The front section of a hatchback is no different from that of a sedan, and its function is the same. The difference lies in the fact that the passenger compartment is extended backward at approximately the same height, merging the rear luggage compartment with the passenger compartment, thereby reducing the car to two "compartments": the engine compartment and the passenger compartment.
14
1
Share

How to disassemble the BYD F3 car key?

The disassembly steps for the BYD F3 car key are as follows: Remove the mechanical key, then forcefully pry open the key shell along the slot where the mechanical key is inserted. After opening the shell, use a blade to remove the battery, replace it with a new one, and then reassemble the remote key shell. The BYD F3 is a compact car under the BYD brand, with dimensions of 4533mm in length, 1705mm in width, and 1490mm in height, and a wheelbase of 2600mm. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 80kW and a maximum torque of 148Nm, paired with a 5-speed manual transmission.
6
1
Share

How to Remove a Spoiler Installed with 3M Adhesive?

Methods to remove a spoiler installed with 3M adhesive: Use a hairdryer to slowly heat it up, allowing the adhesive to soften, then wipe it off with an eraser or use an adhesive remover. The adhesive remover can easily eliminate various types of adhesive residues. It can peel off adhesive labels stuck on car windows, body surfaces, paint, glass, marble surfaces, etc. Additionally, it can effortlessly remove paste residues left after removing glass glue, asphalt, or adhesive labels. Simply spray and wipe to remove the adhesive easily. Before use, shake the can well. Do not invert the can when spraying. Slightly peel off the adhesive label, spray the product evenly from 20 to 40 cm away from the paper adhesive, wait for the solution to soak in, and then gently peel off the adhesive.
2
3
Share

How to Find the Owner's Phone Number by License Plate?

There are several ways to inquire: Call the 122 emergency number, explain the relevant situation, and provide the vehicle license plate number for inquiry. Call 114 for inquiry, explaining the situation where the vehicle is blocking. Contact the vehicle's insurance company, provide the license plate number, and explain the situation for inquiry. Information that can be obtained from the vehicle license plate: The registration location of the motor vehicle can be directly observed through the license plate, but the registration location does not necessarily represent the vehicle's usage location. At the traffic management department of the public security authority or the vehicle management office, relevant departments. By carrying relevant documents, you can inquire about the vehicle owner's information, such as the vehicle's registration time and specific details of the vehicle.
5
1
Share

What Causes the Hissing Sound in Lavida's Engine?

Lavida's engine may produce a hissing sound due to engine overheating. Engine Overheating: Engine overheating can cause a loss of engine power. If the engine operates for an extended period, leading to surface overheating, the cooling system may fail. The first step in this situation is to inspect the cooling system. If there is an issue with the cooling system, it could result in exhaust blockage, as the vacuum tube may be prone to cracking. Engine Abnormal Noise: Abnormal noises in the engine compartment are often characterized by sharp metallic sounds. These noises are primarily caused by excessive wear of certain components or improper assembly and adjustment. Such abnormal noises may indicate potential engine failures. Therefore, when abnormal noises occur in the engine, it is essential to promptly visit a repair shop to prevent further damage.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.