What to Do When Car Air Conditioning Has Poor Cooling Effect?

2 Answers
MacAdalynn
07/25/25 8:27am
Solutions for poor cooling effect of car air conditioning: 1. Adjust the air vents to face diagonally upward, utilizing the principle that hot air rises and cold air sinks. As the cold air descends, it can rapidly cool down the car interior. Also, avoid placing decorations in front of the air vents as they may obstruct airflow and reduce cooling efficiency; 2. Clean or replace the air filter or condenser. Functions of car air conditioning system: 1. Regulate the interior temperature to provide a comfortable environment for passengers; 2. Draw in fresh air for ventilation; 3. Remove humidity from the cabin to facilitate air circulation between inside and outside the vehicle; 4. Filter dust and impurities from the air to purify the cabin environment.
Was this review help?
19
5
Share
AlexandraFitz
08/10/25 6:56pm
After all these years of repairing cars, poor air conditioning cooling performance is quite common, usually caused by several reasons. Insufficient refrigerant is the main cause; over time, leaks or aging can prevent the AC from blowing cold air. Another issue is a clogged cabin air filter, where accumulated dust blocks the airflow, resulting in weak but not cold air. Compressor problems are also frequent, such as worn pump heads or motor failures, causing the AC to make noise but provide weak cooling. A dirty condenser also affects heat dissipation; cleaning surface dirt during car washes can improve performance significantly. When facing this issue, first check and replace the filter yourself—it's usually located in the glove compartment and easy to handle. If cooling still doesn’t improve, go to a professional shop to test pressure and system sealing immediately. Don’t delay—driving in hot weather is uncomfortable and distracting. Regular AC maintenance, including an annual preventive check, can save both hassle and money. A pre-summer inspection is especially crucial, as prevention is far cheaper than repairs later.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

Where is the cabin air filter located in the BAIC Senova D50?

The cabin air filter in the BAIC Senova D50 is located behind the glove box. The functions of the cabin air filter are: 1. To provide fresh air; 2. To absorb harmful substances; 3. To filter solid impurities. Taking the 2019 BAIC Senova D50 as an example, it belongs to the compact car category, with body dimensions of: length 4630mm, width 1820mm, height 1480mm, wheelbase of 2670mm, fuel tank capacity of 50l, and curb weight of 1215kg. The 2019 BAIC Senova D50 features a MacPherson strut front suspension and an H-type torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 116PS, maximum power of 85kW, maximum torque of 148Nm, paired with a 5-speed manual transmission.
18
1
Share

How to adjust the time on a Golf?

To adjust the time on a Golf, follow these steps: 1. Press the one-touch start button located in the center console armrest to power on the vehicle; 2. Press the set button on the left side of the multifunction steering wheel, and the time on the screen will start flashing; 3. Use the adjustment buttons to set the correct time; 4. Once adjusted, press the OK button on the right side of the multifunction steering wheel to confirm. Taking the 2021 Golf as an example, its body dimensions are: length 4296mm, width 1788mm, height 1471mm, wheelbase 2636mm, fuel tank capacity 51 liters, and curb weight 1310kg.
20
3
Share

What are the effects of car battery disconnection on a vehicle?

Disconnecting a car battery has the following effects on a vehicle: 1. Without power supply from the battery, the starter cannot provide the necessary power to start the engine, rendering the vehicle unable to operate normally; 2. Once the battery is disconnected and the vehicle is stopped, the alternator ceases to function, leaving the entire vehicle without power. Consequently, the vehicle's anti-theft system becomes inoperative, and the alarm sounds and lights will no longer function. The functions of the car battery include: 1. Providing power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. Supplying power to the vehicle's electrical equipment when the engine is off or at low idle; 3. Assisting in powering electrical devices when the alternator's output is insufficient; 4. Mitigating voltage surges in the electrical system to protect the vehicle's electronic devices; 5. Storing excess electricity generated by the alternator.
14
2
Share

Where is Porsche originally from?

Porsche is originally from Germany, and its models include: Porsche 911, Porsche 718, Porsche Macan, Porsche Panamera, Porsche Cayenne, etc. Taking the 2021 Porsche 718 as an example, its body dimensions are: length 4379mm, width 1801mm, height 1272mm, wheelbase 2475mm, and body weight 1365kg. The 2021 Porsche 718 has MacPherson independent suspension both in the front and rear, and is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 366PS, maximum torque of 430Nm, and maximum power of 269kW, paired with a 7-speed dual-clutch transmission.
18
2
Share

How to Adjust the Reversing Camera Alignment?

The method to adjust the reversing camera alignment is: Start the vehicle. If the vehicle is not moving, turn on the vehicle's power switch, insert the key into the keyhole below the steering wheel, and turn the key to complete the setting. The function of the reversing camera is: It allows the driver to see the situation behind the vehicle on the display while reversing, avoiding accidents caused by the driver's inability to see behind the vehicle, thereby enabling safer reversing. The working principle of the reversing camera is: A wide-angle far-infrared camera device is installed at the rear of the vehicle, and the situation behind the vehicle can be clearly seen on the display inside the car. The steps for wiring the reversing camera are: 1. Disconnect the power supply connection of the battery; 2. Remove the small license plate light and pass the wiring harness through the position of the small license plate light; 3. Connect the adapter cable—red to the positive terminal, black to the negative terminal, and the signal wire of the camera to one end of the signal extension cable; 4. Connect the signal extension cable to the display; 5. After completing the wiring, restore the battery power supply.
19
2
Share

What is the reason for the screeching sound when braking with a cold engine that disappears when the engine is warm?

The reasons for the screeching sound when braking with a cold engine that disappears when the engine is warm are: 1. The brake caliper does not return to its original position, causing abnormal noise due to friction between the brake pads and the brake disc; 2. Insufficient lubrication of the engine due to oil settling at the bottom when the engine is cold, resulting in abnormal noise. The maintenance methods for brakes are: 1. High-temperature protection to prevent corrosion of the brake system and avoid the brake pads sticking due to high temperatures; 2. Clean oil stains from the brake disc and brake drum components to maintain heat dissipation of the brake disc; 3. Regularly replace the brake fluid; 4. Regularly check the thickness of the brake pads or brake shoes. The function of the brakes is to reduce speed or stop the vehicle. Their working principle involves converting the kinetic energy of the moving vehicle into heat energy through friction between the brake pads and the brake drum, as well as between the tires and the ground, thereby slowing down or stopping the car.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.