What to Do When Car Air Conditioning Cooling is Poor?

1 Answers
DiPiper
07/29/25 5:54pm
Solutions for poor car air conditioning cooling: 1. Clean the filter: If the filter is too dirty, it will block the cold air, reducing the cooling effect; 2. Turn on the internal circulation: When the car air conditioning is on, you can turn off the external circulation and only turn on the internal circulation, so the cold air inside the car won't exchange with the hot air outside, naturally improving the cooling effect; 3. Adjust the air direction: Adjust the car air conditioning vents upward, and the wind blowing on your face will feel cooler; 4. Check the car refrigerant: Over time, the refrigerant may deplete. You can go to a repair shop to check if the refrigerant is missing and add it if necessary; 5. Clean the evaporator: Cleaning the evaporator can enhance the cooling effect and improve air conditioning hygiene, ensuring healthier and safer air.
Was this review help?
4
3
Share
More Forum Discussions

What are the symptoms of insufficient oil pump pressure?

Symptoms of insufficient oil pump pressure include: the oil pressure warning light on the dashboard will illuminate, the vehicle may experience insufficient power while driving, lack of power when accelerating, and a tendency to stall. Low engine oil pressure can lead to excessive wear of components and even mechanical failures such as bearing seizure, piston burning, etc. Therefore, when the oil pressure warning light comes on or the oil pressure gauge indicates low oil pressure, you should stop the vehicle immediately for inspection. The function of the oil pump is to raise the oil to a certain pressure and then forcibly deliver it to the moving surfaces of various engine components. Oil pumps can be structurally classified into two types: gear-type and rotor-type. Gear-type oil pumps are further divided into internal gear-type and external gear-type, with the latter commonly referred to as gear-type oil pumps.
4
5
Share

Do I Need to Change Tires When Modifying Car Rims?

Modifying car rims does not require changing tires, provided that the new rims are of the same size as the original ones. If the new rims are larger or smaller than the original, then it is necessary to replace the tires with ones that match the new rims. The width of the rim determines the width of the tire. If you want to install larger and wider rims, the tires must also be matched accordingly. The rim is the cylindrical metal component inside the car tire that supports the tire, centered around the axle. In simple terms, it is the part of the wheel where the axle is mounted, serving as a crucial component connecting the brake drum (or brake disc), wheel disc, and axle. Car tires are one of the essential components of a vehicle, directly contacting the road surface and working together with the car's suspension to absorb shocks encountered during driving.
17
2
Share

Press and Hold or Short Press for One-Button Start?

One-button start can be activated by pressing and holding, while a short press can turn off the vehicle. The one-button start is a component installed in smart cars, serving as a simplified ignition button that also allows for engine shutdown. The functions of the one-button start intelligent system include: automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-button start, one-button shutdown, automatic locking before driving, automatic unlocking when parking and turning off the engine, trunk opening function, and door unlocking via the central control. For vehicles equipped with one-button start, the ignition sequence is not manually controlled; simply follow the instructions in the manual. A short press will not prevent the engine from starting, and a long press will not cause the starter to overwork. Everything is controlled by the electronic system, which ensures the starter operates until the engine starts or reaches a protected state.
17
4
Share

What Causes the Exclamation Mark to Appear on the Car Dashboard?

The reasons for the exclamation mark appearing on the car dashboard: 1. Overheating of the dry dual-clutch transmission clutch; 2. Fuel cut-off system intervention or malfunction; 3. Parking sensor failure; 4. External light failure; 5. Engine oil pressure sensor failure; 6. Traction control system warning or malfunction. After the fault and warning lights on the dashboard illuminate, it is necessary to promptly visit an auto repair shop or 4S store for inspection. When a fault light is on, professional technicians should use a diagnostic computer to read the fault codes, which can quickly identify the cause of the issue. Regular maintenance also allows technicians to read fault codes with a diagnostic computer. Some car faults may not trigger the dashboard warning lights but will still generate fault codes.
6
3
Share

Where is the fresh water tank located in an Iveco RV?

Iveco RV's fresh water tank is positioned at the vehicle's underside, adjacent to the storage compartment. Iveco RVs feature three distinct water tanks: 1. The fresh water tank stores clean water; 2. The grey water tank collects wastewater; 3. The black water tank primarily handles sewage disposal. With dimensions measuring 5990mm in length, 2250mm in width, and 3580mm in height, the Iveco RV comes equipped with a spacious 300L fresh water tank and a 120L waste water tank featuring an odor-eliminating negative pressure system to maintain cabin air quality. Additionally, it includes an integrated heating and hot water system for instant hot showers.
5
3
Share

What does the TC slash on the car dashboard mean?

When the car dashboard displays a TC slash, it indicates a fault in the traction control system. The reasons for the TC light turning on include: 1. Faulty solenoid valve; 2. Dirty engine oil clogging the solenoid valve filter; 3. Wear and tear on the actuator gear and impeller causing oil pressure leakage, triggering the alarm; 4. Dirty throttle body with an opening reaching 20%, leading the engine computer to mistakenly diagnose a TC fault. If such a fault occurs, it is recommended that the owner promptly visit a repair shop for inspection. The working principle of the traction control system involves replacing the mechanical connection between the accelerator pedal and the throttle with an electronic throttle control device. Sensors transmit the accelerator pedal's information to the ECU, which generates control voltage signals based on the data. The servo motor then adjusts the throttle according to these signals, thereby reducing throttle opening and controlling wheel slip.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.