What to Do When Both Car Keys Are Lost?

1 Answers
VonLondon
07/24/25 8:58pm
You can go to a 4S store to have new keys made or directly visit a regular key duplication service. Here is the relevant information: 1. Getting keys at a 4S store: If you have just bought a new car and lost both keys, you can go to a 4S store to have two new car keys made. However, in such cases, the 4S store usually does not provide this service for free, and the price is relatively high. 2. Going to a regular key duplication service: If the engine does not have an anti-theft system, then any regular key duplication service can make a new key. As long as the key's tooth pattern is correct, the engine can be started. 3. Replacing the entire car lock: When you discover that the keys are lost, it is advisable to go to a 4S store to replace the entire set of locks to ensure 100% safety. However, the cost of replacing the entire car lock is much higher than making two new keys, but replacing the entire set is the safest method.
Was this review help?
9
1
Share
More Forum Discussions

Can 4 Liters of Engine Oil Be Taken on High-Speed Trains?

Carrying engine oil through security check requires obtaining permission from the staff before entering the station. Below is relevant information about engine oil: 1. Introduction: Engine oil, also known as engine lubricant, English name: Engine-oil. It has a density of approximately 0.91kg×10 cubic meters and serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion prevention, as well as shock absorption for the engine. 2. Composition: Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties. Additives can compensate for and improve the deficiencies in the base oil's performance, imparting certain new characteristics, making them an important part of lubricating oil.
18
3
Share

What is a CV joint in a car?

Automotive CV joints are divided into inner CV joints and outer CV joints, also known as "constant velocity universal joints". They are crucial components in a car's drivetrain system, responsible for transmitting the engine's power from the transmission to the two front wheels, enabling the vehicle to drive at high speeds. A typical automotive CV joint consists of the following parts: bell-shaped housing, tripod bearing or steel balls, dust cover, retaining ring, and grease. The main inspection points for CV joints include: 1. Internal and external spline dimensions and thread sizes. 2. Checking the oil seal retaining dimension of the outer CV joint - this dimension usually varies among different CV joint models. 3. Verifying the correctness of the internal spline's circlip groove, as the width of the circlip groove affects the axial movement of the CV joint on the driveshaft after installation. 4. Material and heat treatment properties, which require specialized equipment for inspection.
12
2
Share

What is the liquid in battery replenishment fluid?

Battery replenishment fluid is composed of purified water (or distilled water) with the addition of some pure sulfuric acid. Below is a detailed introduction: 1. Storage battery: The replenishment fluid for storage batteries is called deionized water. In the market, distilled water is often used as a substitute, and purified water can also be used. Such water does not contain conductive ions. It is important to note that tap water or mineral water cannot be used as substitutes, nor can the original sulfuric acid solution. 2. Replenishment fluid: If the battery is not durable, adding replenishment fluid is actually not reliable. Replenishment fluid has some effect on batteries that are not bulging, but the effect is limited. Adding replenishment fluid is harmless, but it does not solve the problem of battery durability. To truly extend the battery's lifespan and endurance, the key factors lie in daily maintenance and usage habits.
4
3
Share

What is the reason for the lack of seat belt reminder voice in the Geely Vision X3?

The reason for the lack of seat belt reminder voice in the Geely Vision X3 is poor contact in the seat sensor. Car seat belts are devices designed to protect passengers and drivers by preventing airbag deployment injuries during severe impacts. Their function is to absorb impact energy, counteract inertial forces, and prevent or reduce the severity of injuries to occupants. The correct usage method for Vision X3 seat belts is: 1. Pull out the seat belt and securely fasten the buckle to ensure proper restraint; 2. Adjust the waist belt position to sit across the hips; 3. Adjust the shoulder strap position to cross diagonally over the clavicle; 4. Check seat belt security before driving to ensure proper functionality; 5. Press the release button while holding the buckle to retract the belt into the reel, then store the buckle in its designated position.
12
2
Share

Which Consumes More Fuel: Snow Tires or All-Season Tires?

Snow tires consume more fuel than all-season tires. Here are the specific details about snow tires: 1. Pros and Cons: Snow tires are designed to adapt to low-temperature environments with enhanced friction. They are very soft, maintaining sufficient grip on snow-covered surfaces and offering good noise reduction. However, snow tires are not designed for summer use; they have poor heat dissipation, increasing the risk of tire blowouts. The soft structure of snow tires, optimized for snowy conditions, leads to rapid wear on summer roads and poor water drainage in the summer. 2. Suitable Environments: Winter tires are generally suitable for temperatures below 7 degrees Celsius. In regions with consistently high temperatures, they can still be used normally. When choosing tires, consider the usage environment. If the temperature changes are not significant, all-season tires may be a better option.
20
1
Share

What does it mean to shift into R gear in a car?

Shifting into R gear in a car refers to putting the car into reverse. The methods to shift into R gear include: 1. After depressing the clutch, directly shifting into the position marked R; 2. Pushing down and then shifting into the position marked R; 3. Lifting up and then pushing forward to shift into the position marked R; 4. Moving the gear lever to the left and then pushing it forward one notch to shift into the position marked R. When shifting into R gear, the following precautions should be taken: 1. Fully depress the car's clutch; 2. Ensure the safety button on the gear lever has been pressed; 3. The vehicle must be completely stopped; 4. Before shifting into R gear, observe the situation behind the car to avoid accidents.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.