What to Do When BMW Tire Pressure Warning Light Comes On

What brand of engine oil is used in the 1.6L Elantra?

1.6L Elantra uses Shell Helix engine oil with the specification SM 5W30. Engine oil, also known as engine lubricant, is composed of base oil and additives. Its functions include: 1. Reducing friction and high temperatures; 2. Cooling and lowering temperature; 3. Cleaning and purifying; 4. Shock absorption and buffering; 5. Preventing rust and corrosion. Taking the 2016 1.6L Elantra Manual Youth Edition as an example, it belongs to the compact car category, with body dimensions of: length 4610mm, width 1800mm, height 1450mm, a wheelbase of 2700mm, a fuel tank capacity of 53 liters, and a trunk capacity of 462 liters.

19

0

Share

Why does the front wheel make a humming noise at low speed of 30 mph?

The reasons for the front wheel making a humming noise at low speed of 30 mph are: 1. Friction generated by the transmission or problems with transmission components; 2. Some issues with the engine may produce whining or high-pitched noises; 3. Loose engine parts or slipping of the engine pulley; 4. Resonance of specific components at high speeds. The solutions for the front wheel making a humming noise at low speed of 30 mph are: 1. First, check the electronic throttle opening; if the opening is large, the throttle needs to be cleaned; 2. Check the condition of the air filter; if the filter is too dirty, it needs to be replaced promptly; 3. Inspect whether the catalytic converter is clogged.

3

4

Share

What are the signs that a motorcycle needs an oil change?

Motorcycle oil change signs are: 1. Increased engine noise; 2. Smoke from the exhaust pipe, reduced power, and unpleasant sound; 3. Decreased engine smoothness. When the engine is running, the oil forms a film on the surface of various components inside the engine, preventing direct contact and friction between internal parts. If direct contact and friction occur, it can generate a large amount of heat instantly, which is fatal to the engine. The main functions of engine oil are to reduce friction and wear of moving parts, remove sludge and paint from the engine, neutralize acids produced by fuel and lubricant oxidation, improve the sealing of piston rings, and cool the engine by carrying away heat from moving parts.

4

2

Share

Where is the chassis number of FAW-Volkswagen located?

FAW-Volkswagen chassis number is located on the front partition of the engine compartment, the left side of the vehicle dashboard, and the nameplate at the lower end of the right B-pillar. It can also be viewed from outside the vehicle through the front windshield. The chassis number is a unique set of seventeen letters or numbers used to identify the manufacturer, engine, chassis serial number, and other performance data of the vehicle. Taking the 2019 Jetta Dream Edition 1.4L Manual Fashion model under FAW-Volkswagen as an example, this car is classified as a compact sedan with a naturally aspirated intake form. Its dimensions are 4501mm in length, 1704mm in width, and 1469mm in height, with a wheelbase of 2604mm. The body type is a 4-door, 5-seat sedan.

2

1

Share

What to Do If a Motor Vehicle Fails the Annual Inspection on Time?

The solutions for a motor vehicle that fails the annual inspection on time are: 1. Stop driving the vehicle on the road and complete the annual inspection procedures as soon as possible; 2. Schedule an appointment for the annual inspection at the vehicle management office; 3. Bring the compulsory traffic insurance policy, ID card, and vehicle license to the vehicle management office at the scheduled time for a supplementary inspection; 4. Clear any traffic violations. Before the inspection, check with the traffic management bureau for any violation records and handle them promptly if any exist. The motor vehicle inspection, also known as the annual inspection, is a mandatory test for all vehicles that have obtained official license plates and vehicle licenses. It involves an annual inspection to ensure the vehicle meets the safety technical requirements for operation.

5

0

Share

Why is there a clicking sound when turning the steering wheel to the limit?

The reasons for the clicking sound when turning the steering wheel to the limit are: 1. The sound from the turn signal returning to position; 2. Abnormal noise from the steering column dust cover, which produces similar sounds when the lubricating oil in the steering column dust cover burns out—simply apply some grease inside to resolve it; 3. Abnormal noise coming from within the steering wheel, often caused by the airbag clock spring inside the steering wheel; 4. Abnormal noise from the shock absorber plane bearing; 5. Loose or damaged stabilizer bar bushings can also produce such sounds. The function of the steering wheel is to convert the force applied by the driver on the edge of the steering wheel into torque and transmit it to the steering shaft. It mainly consists of a frame, foam, and installation clips or screw holes corresponding to the driver's airbag (DAB).

20

3

Share

What to Do When BMW Tire Pressure Warning Light Comes On

What brand of engine oil is used in the 1.6L Elantra?

Why does the front wheel make a humming noise at low speed of 30 mph?

What are the signs that a motorcycle needs an oil change?

Where is the chassis number of FAW-Volkswagen located?

What to Do If a Motor Vehicle Fails the Annual Inspection on Time?

Why is there a clicking sound when turning the steering wheel to the limit?

What Causes a Car to Overheat After a Cold Start?

How much engine oil should be added to a BMW 520?

What Does It Mean When the Car Engine's Yellow Light Comes On?

Can Spark Plugs Affect Fuel Consumption?