What to Do When Bluetooth is Connected but Shows No Network in the Car?

What is the reason why the brake cannot be pressed when the vehicle is not started?

The reason why the brake cannot be pressed when the vehicle is not started is the lack of vacuum. Solutions for brake noise: 1. Press the brake pedal firmly several times or perform emergency braking in an open area to improve the situation; 2. Replace the car's brake pads in time to prevent potential hazards. Methods for braking under different driving conditions: 1. If the brake pedal is abnormal, use engine braking and shift to a lower gear; 2. In traffic congestion, press the brake pedal gently; 3. On rainy or muddy roads, lightly press the brake pedal continuously; 4. In emergency situations, press the brake pedal firmly and then release it slowly, followed by repeatedly pressing and releasing the brake pedal gently.

4

0

Share

What does the torque of a car mean?

The torque of a car refers to the rotational force output from the crankshaft end of the engine. Here is relevant information about torque: 1. Under fixed power conditions, it has an inverse relationship with engine speed - the faster the speed, the smaller the torque, and vice versa. This reflects the vehicle's load capacity within a certain range. 2. Automotive torque is one of the main indicators of an engine, reflected in vehicle performance including acceleration, climbing ability, and suspension. 3. Torque is an important standard for measuring the quality of a car engine. The magnitude of a vehicle's torque is directly proportional to the engine's power. 4. Generally speaking, if the peak torque can be achieved at relatively low engine speeds, it indicates that the engine has good craftsmanship and strong power output.

16

2

Share

Why does the Mercedes-Benz display a coolant refill prompt when the coolant level is normal?

The reasons why a Mercedes-Benz shows a coolant refill prompt when the coolant level is normal are as follows: 1. High coolant temperature: The driver should immediately find a suitable location to stop and observe. If the water temperature is high, the engine should be shut off immediately. After allowing it to cool for a while, contact a repair facility as soon as possible for inspection and maintenance. Note that if the engine is experiencing excessively high water temperature, do not continue driving, as this risks damaging the engine. 2. The signal transmitted by the vehicle system indicates low coolant level: If it is confirmed that the coolant level is normal and the engine water temperature is also normal, the alarm is likely caused by incorrect coolant level or water temperature signals. In this case, it is necessary to check whether the sensors and wiring are functioning properly and whether the control unit's program has any errors.

11

5

Share

Which Side of the Tire Faces Inward and Which Side Faces Outward?

If there are no markings such as "INSIDE" or "OUTSIDE" on the tire sidewall, it generally indicates a symmetrical tread pattern, meaning there is no distinction between the inner and outer sides. If there is a distinction, the side marked "OUTSIDE" should face outward. Such tires are usually designed for specific directional water drainage and feature an asymmetrical tread pattern. Puncture Resistance: Tubeless tires have a surface layer of high-quality rubber. After inflation, the external tension increases, creating a certain pressure on the inner surface, which enhances the self-sealing capability against punctures. If punctured, the tire will not deflate instantly but will maintain pressure for a certain period, ensuring safety during high-speed driving. Superior Wear Resistance: The rim diameter of a tubeless tire is larger than that of a conventional rim, preventing it from being affected by the heat generated by the brake drum during driving. Since there is no inner tube or liner, the tire and wheel rim are sealed as one unit. When the vehicle is driven at high speeds, the heat generated by friction between the tire and the road surface is dissipated directly through the steel rim, rapidly reducing the tire temperature and thereby extending the tire's service life.

3

0

Share

Can LNG Vehicles Be Converted to CNG?

LNG vehicles can be converted to CNG. Gas-powered vehicles have better emission performance, can adjust the fuel structure of the vehicle, and feature low operating costs, mature technology, and high safety and reliability. Differences between LNG and CNG: The main components of LNG and CNG are the same, both being natural gas, but they differ in storage methods and states. LNG exists in a cryogenic liquid state at normal pressure (-162 degrees Celsius), while CNG is stored as a compressed gas at room temperature. Characteristics of LNG and CNG: CNG is stored under high pressure, while LNG is stored at low temperatures. CNG is stored in tanks with a working pressure of 20 MPa, whereas LNG is stored in vacuum-insulated cryogenic containers at -162 degrees Celsius. Precautions: For CNG vehicles, attention must be paid to potential accidents such as explosions or fires caused by cylinder corrosion or damage. For LNG vehicles, precautions include preventing rear-end collisions that could lead to tank explosions or fires, monitoring gas leaks, avoiding prolonged parking that may cause tank pressure to exceed safety valve limits and result in natural gas venting, and preventing safety hazards due to reduced vacuum levels in tanks over extended use.

12

2

Share

Will the Engine Get Water Ingress If the Air Filter Doesn't?

If the air filter gets wet, the engine won't necessarily get water ingress because they are located in different parts of the vehicle. Reasons why the engine doesn't get water ingress: The air filter is positioned in the upper part of the engine compartment, primarily filtering air for the external air conditioning circulation. In heavy rain, raindrops may be directly sucked in, causing the filter to get wet, but this doesn't indicate water ingress in the engine. Engine water ingress is usually determined not by checking the engine bay but by observing whether the main exhaust pipe has water ingress. Therefore, if a car is submerged or stalls while driving through water, it should not be restarted to prevent water from entering the engine through the exhaust pipe. Solution for a wet air filter: Stop the engine; remove all spark plugs; take off the air cleaner; restart the engine to expel water through the spark plug holes. Method for replacing the air filter: First, loosen the filter lock and remove the fixing nut. Then, after removing the cover, the air filter will be visible. If there is dirt inside or outside the filter housing, clean it with a cloth first. Then, install the new filter. Note: Do not touch the paper part of the filter with your hands, and avoid contaminating the filter with oil. Finally, reassemble the components in the reverse order of disassembly.

7

3

Share

What to Do When Bluetooth is Connected but Shows No Network in the Car?

What is the reason why the brake cannot be pressed when the vehicle is not started?

What does the torque of a car mean?

Why does the Mercedes-Benz display a coolant refill prompt when the coolant level is normal?

Which Side of the Tire Faces Inward and Which Side Faces Outward?

Can LNG Vehicles Be Converted to CNG?

Will the Engine Get Water Ingress If the Air Filter Doesn't?

What is the reason why the BYD F0 has electricity but does not respond when starting?

What Causes the Car Body to Be Not Straight When Pulling Over in Driving Test Subject 3?

What type of engine oil should be used for an Alto?

What does MUTE mean in cars?