What to Do When an Electric Vehicle Suddenly Stops Moving but Still Has Power?

2 Answers
CalvinAnn
07/24/25 12:52am
Solutions for when an electric vehicle suddenly stops moving but still has power: 1. It might be an issue with the battery connection wires or battery plug. Try pulling the wires or plug by hand and secure them one by one. 2. The air switch might have tripped. Simply push the air switch back up. Reasons for the switch tripping include: severe vibration causing it to trip or an instantaneous current surge tripping it. Troubleshooting methods for an electric vehicle having power but not moving: 1. Unplug the brake handle socket (normally open type brake handle). If the motor runs, then the brake handle is faulty and should be replaced. The throttle source 5v voltage should be normal. Check the throttle signal voltage; when turning the throttle, the signal voltage should change from low to high between 0.8v to 4.2v. 2. Check if the battery output of the electric vehicle is normal. If the output is too low, it indicates a faulty battery that needs immediate replacement. 3. Disconnect the brake wire. If the vehicle moves, it means the brake handle is damaged and needs replacement.
Was this review help?
14
5
Share
SanEloise
08/10/25 8:36pm
If my electric car has its lights on but won't move, I'll first check some simple things: confirm that the battery indicator truly shows sufficient charge, as display errors are common; then try a system reboot—turn off the key after parking, wait about a minute, and restart, which often resolves software glitches. If rebooting doesn’t help, check the fuse box location—a blown fuse might cut power to the drive system; I’d refer to the manual to locate the correct fuse and see if it’s blackened or broken. Also, check if it’s a mode issue, like the electronic parking or speed limit mode being accidentally activated. If none of these work, it could be a more serious motor controller or sensor failure—don’t tamper with high-voltage components yourself. Instead, contact a 4S shop or professional technician for diagnosis and repair, as forcing the car to move could worsen the problem.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

Is it okay to drive a water-damaged car?

It is not advisable to continue driving a water-damaged car. The hazards of a water-damaged vehicle include the following three points: 1. Engine damage: When the water level exceeds the engine's air intake, water can be sucked into the engine cylinders. Since water is incompressible, if the engine stalls due to water ingress and is restarted, the immense reverse force can cause the connecting rods to bend and rub against the engine cylinders, potentially rupturing the engine block instantly, leading to severe engine damage. 2. Transmission damage: Transmissions, whether manual or automatic, have ventilation holes, allowing water to enter. For manual transmissions, prompt cleaning and replacing the gear oil may mitigate major damage. However, automatic transmissions, due to their complex structure and high precision, can suffer from malfunctions if not thoroughly treated. 3. Electrical system damage: Water exposure causes the most significant harm to a vehicle's electrical components. When powered, water can quickly corrode wire connectors, causing short circuits. Severe cases may result in water ingress into various control units, corroding electronic components, which are costly to replace.
20
2
Share

How Many Types of Color Change Film Materials Are There?

Automotive color change films are primarily made of PVC material. The best is MACTIC, the exclusive agent of Cheyishang, with a material thickness of 10um. Methods to distinguish quality: 1. Price: Understand the corresponding prices of color change films at different levels in the market to avoid being deceived. 2. Color: Imported color change films have full and uniform colors, while domestic ones have a strong granular feel. 3. Texture: The thickness and toughness of the backing paper are proportional to the quality of the color change film. Imported films have a fine surface, suitable thickness, and are less prone to creases; domestic films are noticeably rough, lack toughness, and creases are hard to recover. Usage methods: 1. Remove any accessories that may interfere with the installation in advance. 2. After overall vehicle preparation, start cutting the film according to the glass size for a preliminary fit. 3. Apply the roughly cut film to the vehicle body. 4. After installation, the film will adhere smoothly to the body, requiring further adjustments to precisely match the vehicle's shape. 5. Finally, conduct a thorough inspection, especially checking each window and edges for bubbles, which should be addressed immediately if found.
9
4
Share

What does cruise mean in cars?

Car cruise refers to the cruise control system, also known as the constant speed cruising device, speed control system, or autonomous driving system. Below are the relevant introductions: 1. Its function is to automatically maintain the vehicle speed as required by the driver after setting the speed and switching it on, allowing the vehicle to travel at a fixed speed without the need to press the accelerator pedal. 2. With this device, drivers no longer need to control the accelerator pedal during long-distance driving on highways, reducing fatigue and unnecessary speed changes, which can save fuel. 3. When the cruise control button is pressed, the car will maintain that speed. The function immediately disappears when the brake pedal is pressed.
13
1
Share

What does SPN on the car dashboard mean?

SPN on the car dashboard is a fault code of the vehicle, indicating that the water content in the vehicle's fuel filter exceeds the standard. It is necessary to promptly drain the water from the fuel filter. If it cannot be drained, the fuel filter needs to be replaced to avoid causing problems in the operation of the motor vehicle. Fuel Filter: Fuel filters (Fuel filter) are divided into three categories: diesel filters (Diesel filter), gasoline filters (Fuel Filter), and natural gas filters (Gas filter). The function of the fuel filter is to prevent particles, water, and impurities in the fuel, ensuring that the precision components of the fuel system are protected from wear and other damages. Fuel Filter Replacement Cycle: The recommended replacement cycle of the fuel filter should vary according to its own structure, performance, and purpose, and cannot be generalized. Most automobile manufacturers recommend a normal maintenance replacement cycle of 48,000 km for their external filters; a conservative maintenance replacement cycle is recommended at 19,200 to 24,000 km. If unsure, please refer to the owner's manual to find the correct recommended replacement cycle.
11
5
Share

Are Japanese Car Engines Imported?

Most Japanese car engines are imported. Introduction to Engines: An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. The term engine can refer to both the power generation device and the entire machine including the power unit. How to Check Engine Model: The engine model is generally marked on the valve cover. Of course, specific models may have different markings. The first digit indicates the number of cylinders, followed by digits representing the cylinder diameter. Letters have three meanings: cylinder arrangement (no symbol equals in-line, V equals V-type cylinder arrangement, P equals horizontal type), cooling and turbocharging (no symbol is water-cooled, F is air-cooled, N is condensation-cooled, Z is turbocharged), and usage codes (T for tractors, M for motorcycles, G for construction machinery, Q for vehicles, D for generator sets).
4
2
Share

What are the hidden features of the sixth-generation Camry?

Here are the hidden features of the sixth-generation Camry: 1. Key-linked opening of the driver's window and sunroof; 2. Automatic folding and unfolding of the rearview mirrors; 3. Lane change signal flash count, default is 3, options include 3, 4, 5, 6, 7; 4. When the external rearview mirror adjustment switch is set to R and pushed to R gear, the external rearview mirror will automatically tilt down. Below are the basic details of the sixth-generation Camry: 1. The sixth-generation Camry is a B-class mid-size vehicle. 2. The sixth-generation Camry was launched in 2006 and discontinued in 2013. 3. The Camry mainly comes in three configurations: E (basic), G (mid-range), and V (high-end). It features three powertrains: 2.0L 4AT, 2.4L 5AT, and a hybrid model with 2.4L + electric motor.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.