What to Do When All Driving Points Are Deducted?

1 Answers
StMary
07/30/25 8:28am
After all driving points are deducted, the following measures should be taken: 1. Study: Within 15 days, you should go to the traffic management department of the public security organ at the place where the motor vehicle driving license was issued or where the illegal act occurred, and participate in a 7-day study of road traffic safety laws, regulations, and related knowledge. 2. Take the exam: After completing the study, the vehicle management office should conduct a test on road traffic safety laws, regulations, and related knowledge within 20 days. If you pass the exam, the points will be cleared, and the motor vehicle driving license will be returned. Those who fail the exam must continue studying and retaking the test.
Was this review help?
15
3
Share
More Forum Discussions

Is the Vibration of a Three-Cylinder Car Noticeable?

The vibration of a three-cylinder car is quite noticeable. The main advantages of a three-cylinder car engine are: 1. Low fuel consumption. The three-cylinder engine performs excellently in fuel consumption control. 2. The engine is compact, has high power density, and excellent thermal efficiency. 3. Strong power. Under the same displacement, the single-cylinder volume of a three-cylinder engine is larger than that of other engines, providing better power at low speeds. 4. Low turbo lag. Compared to a four-cylinder engine, a three-cylinder engine has less turbo lag. Additional Information: 1. A three-cylinder engine consists of three cylinders. Inside, three identical single cylinders are arranged on a single block sharing a crankshaft to output power, primarily converting chemical energy into mechanical energy. 2. The basic principle of a three-cylinder engine involves converting the chemical energy of gasoline into thermal energy. The combustion of the compressed air-fuel mixture in the sealed cylinder expands, pushing the piston to perform work, thereby converting thermal energy back into mechanical energy.
18
1
Share

What Causes White Smoke from the Engine Exhaust Pipe?

White smoke from a car's exhaust pipe may be caused by a dirty air filter, temperature issues, or incorrect oil levels. Below is relevant information about car exhaust: 1. It could be due to a dirty air filter in the vehicle: leading to insufficient air intake, or possibly a problem with the carburetor, or contamination of the oxygen sensor in the exhaust pipe, causing the computer to provide incorrect air-fuel mixture information. 2. Temperature: Normal white smoke is due to the exhaust gases being expelled from the pipe; when these gases reach a certain temperature, they condense into water droplets. If the engine emits a large amount of water vapor or white smoke while running, check the fuel tank for water accumulation, inspect whether the cylinder head gasket is damaged, if the engine block has cracks, or if the cylinder sleeve seal is intact. 3. Oil level: High temperatures in the cylinder can cause gases to enter the oil pan, leading to oil degradation. This is a very common issue, so it's crucial not to overfill or underfill the oil. Normally, exhaust gases are just water vapor, but the high idle speed of a cold engine can also cause the water vapor to appear as white smoke. In fact, white smoke is relatively easy to address, as long as there is no black or blue smoke.
2
5
Share

What Causes an Automatic Transmission to Fail to Engage?

Possible causes include a malfunction in the gear shift lever assembly, a failure in the P-gear lock solenoid valve inside the shift lever, or a damaged brake light switch, all of which can prevent the gear from moving. Relevant details are as follows: 1. During the use of the car's gear shift lever, shifting gears requires looking down at the lever. Avoid prolonged driving in low gear, as high gear is more fuel-efficient than low gear, so it is advisable to shift up promptly after starting. If the clutch pedal is not fully depressed during gear shifting, it can cause gear damage. Additionally, when using the clutch, avoid resting your foot on it, as this can lead to excessive wear on the release bearing. 2. If you encounter difficulty shifting into a gear, avoid forcing it. When the gear lever is in neutral, avoid shaking it back and forth, as this can cause unnecessary wear on components and affect the timing of gear shifts. Do not skip gears when upshifting; instead, shift sequentially to prevent a loss of power continuity in the car. Downshifting, however, can skip gears. Avoid engaging reverse gear before the vehicle comes to a complete stop, as this can cause gear damage.
18
2
Share

What is the lane with short white diagonal lines on both sides?

The lane with short white diagonal lines on both sides is called a sawtooth lane. Here are the specific details about sawtooth lane markings: 1. Appearance: Sawtooth lane markings are a type of deceleration marking. Deceleration markings can be divided into horizontal deceleration markings and vertical deceleration markings. They are white dashed lines set up in toll plaza areas, exit ramps, or other sections where vehicle speed reduction is required. They come in forms such as single dashed lines, double dashed lines, and triple dashed lines, arranged perpendicular to the direction of travel. The vertical deceleration markings for the lane consist of a series of diamond-shaped dashed lines parallel to the lane dividing line. 2. Function: Sawtooth lane markings are typically installed at bridge approaches, exits, and turns. Their main purpose is to create a visual narrowing of the lane, inducing a sense of pressure on drivers, prompting them to automatically reduce speed at locations requiring deceleration, such as curves and slopes. Whether lane changes are permitted under deceleration markings depends on the state of the adjacent markings. If the adjacent line is solid, lane changes are not allowed; if it is dashed, lane changes are permitted.
11
2
Share

How to Clean Double-Sided Tape on Car Paint?

Here are the steps to remove double-sided tape from car paint: 1. First, spray an appropriate amount of tar remover on the painted surface. 2. Use a plastic scraper to remove the double-sided tape treated with tar remover; a card can be used as a substitute if a plastic scraper is not available. 3. Repeat the scraping process until the double-sided tape on the car body is completely removed. 4. Wipe the car body clean with a clean cloth. Additional information: 1. Car cleaners are liquid tile cleaners formulated with high-tech environmental technologies, mainly composed of surfactants, bactericides, polishing agents, imported penetrants, and unique brightening factors. 2. They have strong cleaning power, penetration, bactericidal properties, and polishing brightness. 3. They can quickly clean car glass surfaces, fenders, and the car body. 4. Car cleaners can remove various adhesive papers, labels, and oil stains from car glass surfaces, as well as from around wheels, mudguards, bumpers, the car body, and various tools. 5. After use, car cleaners can form a protective film to safeguard the car paint. 6. Interior car cleaners are designed to clean products inside the car made of chemical fibers, wood, leather, fabric, velvet, and engineering plastics (e.g., ceilings, seats, dashboards, carpets, etc.).
6
3
Share

Where is the Volkswagen OBD port located?

The OBD port of the Volkswagen Lavida is located under the steering wheel in the main driver's compartment, near the knee area. It is secured with screws. After removing the screws, you can see the pink female port connector inside the cover panel by prying off the clips. Below are some related details: 1. Exterior: The new generation Lavida maintains the overall design of the previous model, with major changes focused on the front and rear bumpers. The front bumper's air intake has been updated to a three-section design, and the front lip styling is more sporty, giving it a distinctive look from a distance. It has shed the rugged, mature style, better aligning with the aesthetics of younger consumers and adding a touch of a warm, family-friendly vibe. 2. Interior: It retains the familiar Volkswagen style. The three-spoke flat-bottom steering wheel is equipped with multimedia buttons, and the center console features a ceramic-like panel, adding subtle accents to the otherwise simple interior to avoid a dull appearance—still very much in line with Volkswagen's signature style. In terms of configuration, the new car comes standard with ESP electronic stability system, tire pressure monitoring, one-touch power windows for all four doors, and a four-probe rear parking radar. 3. The new generation Lavida is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 83kW (113PS) and a maximum torque of 145N.m at 3900rpm.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.