What to Do When All 12 Points Are Deducted?

What are the impacts of driving through water on a car?

Driving through water can have several impacts on a vehicle: 1. Rusting of the car chassis; 2. Water ingress into the headlights; 3. Rusting of the brake pads; 4. Clogging of the air filter; 5. Damage to the vehicle's electronic equipment, etc. When driving through water, it is essential to carefully assess the water's depth, flow speed, and the nature of the waterbed, as well as the width of the entry and exit points and road conditions, to determine if it is safe to proceed. After driving through water, the following safety checks should be performed: 1. Park the vehicle in a wide and safe area, remove any waterproof coverings, check if the engine ignition system has been exposed to water, and use a dry cloth to wipe any damp electrical components to prevent short circuits or disconnections. 2. Inspect all gearboxes for water ingress, check for any debris clogging the radiator fins, assess tire damage, and ensure there are no aquatic plants tangled under the chassis. Clean the vehicle promptly. 3. Start the engine and let it idle for several minutes until it reaches normal operating temperature to dry off any water and moisture on the engine.

11

4

Share

How Many Cylinders Does the BMW 3 Series 320 Have?

The BMW 3 Series 320 is equipped with a four-cylinder engine. The BMW 3 Series 320 features a 2.0T turbocharged engine, which delivers a maximum power of 115 kW and a peak torque of 250 Nm. This engine is paired with an 8-speed automatic transmission. Below is a comparison between three-cylinder and four-cylinder engines: 1. The four-cylinder engine is commonly found in household vehicles. Generally, most cars on the market use four-cylinder engines, while only a few models utilize three-cylinder engines. This is because four-cylinder engines have more mature production technology and operate more stably. 2. Due to the inherent structure of three-cylinder engines, they may have some design flaws, leading to noticeable vibrations during operation, making them less stable than four-cylinder engines. 3. Since three-cylinder engines lack one cylinder, they are lighter in weight and more compact in size, which helps reduce the overall weight of the vehicle to some extent.

20

4

Share

What is the speed limit when visibility is below 100 meters on the highway?

When visibility is below 100 meters on the highway, the maximum speed should not exceed 40 kilometers per hour, and a distance of more than 50 meters should be maintained from the vehicle in front in the same lane. When visibility is below 200 meters on the highway, the speed should not exceed 60 kilometers per hour, and when visibility is below 50 meters, the speed should not exceed 20 kilometers per hour, and the vehicle should leave the highway as soon as possible. When visibility is below 100 meters on the highway, drivers need to turn on the fog lights, low beam lights, position lights, front and rear position lights, and hazard warning flashers to ensure that vehicles in front and behind can easily detect the presence of the vehicle. If a motor vehicle is driving on the highway and encounters low visibility weather conditions such as fog, rain, snow, dust, or hail, the highway management department should issue speed limit and distance-keeping prompts through displays and other means.

20

1

Share

What Causes the Abnormal Noise When Engaging Fifth Gear?

Transmission housing damage, gear surface fracture, or improper transmission assembly can cause abnormal noise when engaging fifth gear. Transmission Housing Damage: Long-term wear and deformation of the transmission housing and bearing seat holes. This noise is loudest when engaging low gears and gradually decreases when shifting to higher gears, with the direct gear being the quietest. Gear Surface Fracture: Impact during meshing due to fracture of individual gear surfaces. Engaging this gear position will cause strong impact and vibration, leading to resonance in the transmission housing. Improper Transmission Assembly: Improper replacement of gears, needle bearings, or bushings in a specific gear position, or abnormal assembly clearance, resulting in poor gear meshing and abnormal noise during transmission. Solutions for Abnormal Noise When Engaging Fifth Gear: Fully depress the clutch, check and tighten the linkage mechanism, replace damaged clutch plates, master the correct gear-shifting method (ensure full engagement), check the clutch if separation is incomplete, and tighten the gear lever if loose (due to loose connecting rubber bushings).

5

1

Share

How to Clean and Disinfect a Car Air Conditioner?

You can use a car air conditioner disinfectant cleaner to clean and disinfect the car air conditioner. The steps for cleaning and disinfecting the car air conditioner are as follows: 1. After starting the car, turn on the air conditioning cooling switch, set the air volume to the minimum, adjust the temperature to the highest, and ensure the air conditioning system is in external circulation mode. 2. Place your hand near the air conditioning intake vent; you will feel air being drawn into the car. Spray the air conditioner disinfectant cleaner into the intake vent, and the cleaner spray will flow through the air conditioning evaporator into the car cabin with the air. 3. Note that after spraying the cleaner, the car doors and windows should be closed to achieve better disinfection. Also, ensure there are no people or pets in the car during the cleaning process. The cleaning process should last about 15 minutes. After completing the cleaning, open the windows for ventilation. 4. Remove the air filter and clean it with a high-pressure air gun. If it is too dirty, replace it.

18

2

Share

Can Points Be Deducted After Registering Someone Else's Vehicle?

Registering a non-personal motor vehicle allows for point deductions. When handling traffic violations for a non-personal vehicle, you need to bring your own ID, the vehicle's registration certificate, along with the violator's driver's license and ID to the traffic management department's violation processing window. Below is relevant information about driver's licenses: 1. Small cars: To apply for small cars, small automatic transmission cars, or light motorcycles, the applicant must be between 18 and 70 years old. 2. Trucks: To apply for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be between 18 and 60 years old. 3. Buses: To apply for city buses, medium-sized buses, large trucks, trolleybuses, or trams, the applicant must be between 21 and 50 years old. 4. Tractor trucks: To apply for tractor truck licenses, the applicant must be between 24 and 50 years old. 5. Large passenger vehicles: To apply for large passenger vehicle licenses, the applicant must be between 26 and 50 years old.

15

2

Share

What to Do When All 12 Points Are Deducted?

What are the impacts of driving through water on a car?

How Many Cylinders Does the BMW 3 Series 320 Have?

What is the speed limit when visibility is below 100 meters on the highway?

What Causes the Abnormal Noise When Engaging Fifth Gear?

How to Clean and Disinfect a Car Air Conditioner?

Can Points Be Deducted After Registering Someone Else's Vehicle?

Why is the car's air conditioning not cooling properly?

What will be displayed on the instrument panel when the Mazda 3's brake light fails

What to Do If Your Driver's License Has Been Deducted 12 Points for Two Years Without Attending the Required Course?

How to Remove a Broken Spark Plug from the Cylinder?