What to Do When Accumulating 24 Points in a Scoring Cycle?

2 Answers
Zoey
07/28/25 2:39pm
Below are the relevant handling methods when accumulating 24 points in a scoring cycle:1. Handling method: When accumulating 24 points in a scoring cycle, the vehicle management office shall also conduct a road driving skills test within ten days after passing the road traffic safety laws, regulations, and related knowledge exam. Take the road driving skills test according to the highest permitted driving model specified on your motor vehicle driver's license.2. Below 12 points: If a motor vehicle driver accumulates fewer than 12 points in a scoring cycle and the imposed fines have been paid, the points will be cleared; if the fines have not been paid even though the points are fewer than 12, the points will be carried over to the next scoring cycle.
Was this review help?
13
4
Share
DiJaxson
08/11/25 10:36pm
I was quite nervous last time when my driving demerit points were approaching 24, because I was caught speeding several times last year and also ran a red light once, which cost me 6 points. The DMV sent me a text message asking me to handle it, and only then did I realize I had to act quickly. First, I booked a full-point education course online and attended a week of classes, two hours each day, covering traffic rules and key points of safe driving. After completing the course, I took an exam with 50 questions, mostly theoretical, and needed to answer at least 45 correctly to pass. I spent some time reviewing and passed on the first try, with my points reset to zero. The whole process took me two weeks, but luckily I managed to take leave and get it done. I advise other drivers not to ignore minor violations—even using a phone while driving can cost points. Regularly check your point status using apps to avoid accumulation. Stay focused while driving, as fines are the least of your worries—losing your driving qualification would be much worse.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

What kind of engine oil is suitable for the Teana?

Nissan Teana can use fully synthetic engine oils with specifications of 0W-30, 5W-30SN, and 0W-40SN. More details about the engine oil for Teana are as follows: 1. Nissan Teana can select engine oil according to the user manual: Nissan Teana uses fully synthetic engine oil of 0W-30. According to the user manual, semi-synthetic engine oil (minimum requirement) can be used, but fully synthetic engine oil is the best choice. 2. Fully synthetic engine oil with the specification of 5W-30SN is the best choice for Nissan Teana: The 0W-40-SN specification engine oil can also be used. Fully synthetic engine oils of 0W-40-SN from Mobil, Shell, or Castrol are all suitable for Teana. At the same time, any engine oil that meets the SAE certification level can be used.
4
1
Share

How to Use the Engine Auto Start-Stop Feature in the Verano?

The correct usage method for the Verano's engine auto start-stop system is as follows: 1. After the vehicle is started, the StartStop system is in the enabled state and will only operate when certain conditions are met, such as the engine reaching a certain temperature, sufficient battery charge, the air conditioning being within the set temperature range, doors being closed, and not being on a steep uphill or downhill slope; 2. When the engine automatically stops but cannot meet safety or comfort requirements, it will automatically restart. Examples include excessive heating or cooling inside the vehicle, the car starting to roll, a drop in the car battery's voltage, or steering wheel movement. The StartStop system will not function when it affects the vehicle's comfort and safety; 3. When the engine is automatically stopped, if conditions affecting safety occur, the driver needs to manually start the engine. Examples include the driver unfastening the seatbelt, the driver's side door being opened, or the engine hood being opened.
14
3
Share

What kind of engine oil is generally used for the Elantra?

The Elantra typically uses engine oil with a viscosity grade of 20 or 30. Depending on temperature conditions, 5W20 or 5W30 oil is used in most regions, while 0W20 or 0W30 oil is recommended for extremely cold areas to ensure proper operation of the Hyundai Elantra's engine. Specific details are as follows: 1. Due to the Elantra's tightly structured engine with small clearances between component surfaces, using low-viscosity oil helps reduce fuel consumption and maximize engine performance. Naturally aspirated engines have modest oil requirements and can use mineral oil, semi-synthetic oil, or full synthetic oil. 2. Compared to naturally aspirated engines, turbocharged engines have more precise construction and operate under harsher conditions, requiring higher-grade lubricants with better fluidity. 3. When selecting an oil brand, choose long-lasting oil like Mobil for extended performance, Shell for strong cleaning capabilities, or Castrol for superior oil film toughness. Turbocharged engines are prone to carbon buildup during high-speed operation, making Shell oil with strong cleaning properties a suitable choice.
10
2
Share

How to Turn Off the Radio in Arrizo 5?

To turn off the radio in the Arrizo 5, you can use the built-in in-car voice recognition system of the Arrizo 5. This voice recognition system allows you to perform operations such as turning the radio on and off. Additionally, you can manually operate the radio via the corresponding icons on the central control screen. The car radio is a voice entertainment configuration installed in vehicles and is one of the earliest and most common components of in-car audio-visual entertainment systems. How to use the Arrizo 5 car radio: 1. System settings: Includes time adjustment, radio frequency region settings, BEEP button, and advanced settings like language. 2. Audio settings: BASS for bass boost, with positive numbers indicating an increase, up to 7 or 10 for maximum. TREB for treble boost, same as above. BAL for left-right channel balance. FAD for front-rear channel balance, etc. EQ settings, generally preset with several effects to choose from, such as ROCK, JAZZ, etc. These may conflict with the previous two settings; generally, adjusting BASS or TREB here will automatically disable the other. 3. Radio settings: Press AS to automatically search for stations, which will be saved on positions 1 to 6. Alternatively, after selecting a frequency, long-press 1~6 to save the station to the corresponding number. 4. Search for channels. Click the "Search" button located on the screen to start the automatic channel search function. 5. Stop channel search. Press the "Stop" button at the finger position to halt the station search. 6. SCAN: Used for quickly searching stations. Browse playback, where each station plays for a while before jumping to the next, cycling through. Press this button again to listen to the current station.
5
5
Share

What is the tire size of the Mazda3 Axela?

The Mazda3 Axela tire model specification is 205/60-R16 (tire width 205mm, tire thickness 123mm, aspect ratio 60%, wheel diameter 16 inches). The Mazda3 Axela is equipped with Goodyear tires, which is quite generous for a Japanese car to be fitted with American Goodyear tires. Goodyear tires can to some extent balance comfort and wear resistance. More details are as follows: 1. When purchasing tires, don't just look at the price. Consult professionals who can accurately match the appropriate tires. 2. When choosing tires, also be careful not to mix different types of tires, such as using tires more suitable for off-road vehicles with those for regular cars, or mixing directional sports car tires with regular ones. 3. Of course, when purchasing, try to avoid retreaded tires. Some small street shops often sell retreaded tires as new ones, so consumers must be cautious when selecting. 4. The method to identify retreaded tires is simple: the most common way is to observe the color and luster of the tire. Retreaded tires tend to have duller colors and luster, so don't blindly purchase such tires.
14
2
Share

Where is the OBD interface located on the BAIC Huansu H2?

The OBD interface of the BAIC Huansu H2 is located below the left side of the steering wheel. More details are as follows: 1. The full English name of OBD is On-Board Diagnostics, and its Chinese meaning is the vehicle's self-diagnosis system. The placement of the OBD interface may vary depending on the type of vehicle, which needs to be determined based on the specific model. 2. The self-diagnosis system is mainly used to monitor the operating condition of the engine. During operation, the engine consumes fuel, and the combustion of fuel produces exhaust gases. The vehicle's self-diagnosis system continuously monitors whether the vehicle's exhaust emissions exceed the standard. If the vehicle's exhaust emissions exceed the standard, the OBD warning light will immediately illuminate to alert the driver, which is also a safety feature of the vehicle. 3. It is worth mentioning that, in addition to monitoring exhaust emissions, OBD can also detect the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, etc. 4. When there is a problem with the vehicle's operating condition, while issuing an alert, the OBD system will store the fault information in the memory, making it easier for maintenance personnel to diagnose the problem. It is recommended that car owners regularly maintain their vehicles during use to avoid problems that may affect normal operation.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.