What to Do When Abnormalities Occur in the Car Braking System?

1 Answers
AniyahLynn
07/29/25 3:04am
Vehicle braking system abnormalities indicate a malfunction in the car's braking system, requiring timely repairs. Below is relevant information about the car braking system: Meaning of the Car Braking System: The car braking system refers to a series of specialized devices that apply a certain force to specific parts of the car (mainly the wheels), thereby enforcing a certain degree of braking. Functions of the Car Braking System: To force a moving car to decelerate or even stop as required by the driver; to keep a parked car stable under various road conditions (including on slopes); to maintain a stable speed for a car moving downhill. The braking effect on a car can only be achieved by external forces acting on the car in the opposite direction of its movement. However, the magnitude of these forces is random and uncontrollable, hence the necessity for a series of specialized devices in the car to achieve the aforementioned functions.
Was this review help?
8
0
Share
More Forum Discussions

How to Test the Condition of a Car Battery?

Methods to test the condition of a car battery: 1. Connect the positive and negative clips of the battery tester properly, with the red clip attached to the positive terminal and the black clip to the negative terminal of the battery; 2. Once connected, the battery will display the current static voltage; 3. Press the Enter key to select external testing; 4. Press the Enter key again to choose a standard lead-acid battery; 5. Select the measurement standard type based on the battery label; 6. Use the up and down buttons on the battery tester to adjust the test rating to 550A; 7. After adjusting the corresponding rating, press the Enter key to confirm and start the test; 8. Judge the actual condition based on the test results.
10
3
Share

Is the Lynk & Co 03 Plus engine from Volvo?

Lynk & Co 03 Plus engine is not from Volvo. The engine of Lynk & Co 03 utilizes Volvo's technology, but it does not directly use Volvo's engine. The Lynk & Co 03 is a compact sedan under the Lynk & Co brand, with dimensions of 4639mm in length, 1840mm in width, and 1472mm in height, and a wheelbase of 2730mm. The Lynk & Co 03 is equipped with three engines in total: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. The front suspension of the Lynk & Co 03 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
14
5
Share

What are the common methods for removing old paint?

Common methods for removing old paint: 1. Manual paint removal; 2. Mechanical paint removal; 3. Sandblasting paint removal; 4. Electric sanding; 5. Chemical paint removal. Manual paint removal is a commonly used method in painting work and is the only method for partially removing old paint films. It mainly relies on tools such as scrapers, putty knives, wire brushes, and sandpaper to remove old paint from the surface of vehicle components. Mechanical paint removal uses electric or pneumatic tools, such as wire wheels, wire sanders, and dry/wet sandpaper sanders, to replace manual scraping and sanding. Sandblasting paint removal involves using compressed air, high-pressure water flow, or mechanical centrifugal force to project abrasives, sand, or metal shot onto the old paint surface, removing the old paint through impact and friction.
17
0
Share

How often should the throttle body and fuel injectors of a car engine be cleaned?

It is recommended to clean the throttle body and fuel injectors of a car engine every 20,000 to 40,000 kilometers. However, cleaning the throttle body too frequently is not beneficial. Over-cleaning can gradually remove the special coating inside the throttle body cavity. Without this coating, the cavity is more prone to oil buildup, which can accelerate the aging of the throttle body or increase its load. On the other hand, if the throttle body is not cleaned for a long time, the accumulated carbon deposits and impurities can affect the accuracy of the throttle opening. This may also allow air containing impurities to enter the combustion chamber, disrupting the normal operation of the engine. The most noticeable symptoms include unstable idling, a sudden feeling of fuel cutback during normal driving, significantly reduced power, increased fuel consumption, and in some cases, even difficulty starting the engine.
16
0
Share

Common Troubleshooting for Electric Quadricycle Controllers

Common troubleshooting methods for quadricycle controllers are as follows: 1. Turn off the ignition lock, if there is resistance when gently rotating the motor, it indicates that the controller's MOS tube is damaged. 2. Connect only the power line to the controller, measure the voltage at the controller's power output terminal with a multimeter. If the voltage is <4V, it indicates an internal fault in the controller. 3. The "abnormal condition" caused by damage to the motor Hall sensor indicates a problem with one of the phase line circuits inside the controller. Additional information about electric quadricycle controllers is as follows: 1. The electric quadricycle controller is the component that controls the motor's rotation. 2. If the controller is damaged, it may cause short circuits, burn out the electric vehicle's fuse, or trip the circuit breaker.
5
5
Share

What are the functions of a header exhaust system?

Exhaust headers are used to monitor the air-fuel ratio and reduce the pollution levels of exhaust gases as they exit the engine, thereby achieving environmental benefits. Below is a detailed introduction to exhaust headers: 1. Exhaust headers generally refer to the part directly connected to the engine's exhaust system, mainly consisting of three components: metal connecting pipes, flexible joints, and high-flow metal catalytic converters. 2. After modifying the exhaust headers, it can increase the car's power, improve acceleration in the mid-to-high range, and make exhaust emissions smoother. When combined with modifications to the mid-section of the exhaust system, the effects become even more pronounced. This is especially beneficial for vehicles using aftermarket engine control units (ECUs), ECU tuning, or turbocharged engines.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.