What to Do When a Wrench Symbol Appears on a Chevrolet?

1 Answers
StAlyssa
07/29/25 6:29pm
The wrench warning light on the dashboard indicates that it will illuminate every 5,000 kilometers or six months. When the maintenance light is on, you can go to a repair shop to change the engine oil and oil filter. After replacement, ask the technician to reset the maintenance light.
Was this review help?
10
1
Share
More Forum Discussions

What is the Chinese name for the Toyota Granace?

Toyota Granace is called Toyota Granace in Chinese. Below is an introduction to the Granace: Granace body dimensions: The Toyota Granace has body dimensions of 5300×1970×1990mm, with a wheelbase length of 3210mm; the interior dimensions are 3290×1735×1290mm. Granace interior layout: The Toyota Granace offers two seating configurations—three-row six-seater and four-row eight-seater. The six-seater version features comfortable, electrically adjustable footrests for the second and third row's four independent seats.
11
2
Share

How Long Can Dash Cam Videos Be Stored?

Duration for which dash cam videos can be stored: A 16G memory card can record for 100 minutes; a 32G card can record for 200 minutes; a 64G card can record for 400 minutes. The storage duration of the recordings is determined by the memory card size. The dash cam records automatically and stops recording a few minutes after the vehicle is turned off. However, if the vehicle senses an impact while parked, the dash cam immediately starts recording again and returns to standby mode after a few minutes. A dash cam is a device that records images, sounds, and other relevant information during vehicle travel. After installation, it can capture the entire driving process in video and audio, providing evidence in case of traffic accidents.
19
4
Share

What causes the Changan Star to have no fuel, no spark, and no signal electricity?

Here are the reasons why the Changan Star has no fuel and no spark: No fuel or spark during startup: If there is no fuel injection or ignition during startup, it is necessary to check the crankshaft position sensor signal, as this vehicle integrates it inside the distributor. Inspect the sensor voltage signal and grounding for abnormalities, because the ECU will not control fuel injection and ignition if it does not receive a signal. Electrical circuit issues: Focus on testing the three wires of the sensor. A common fault is the power wire having no electricity; check the fuse and wiring. You can directly supply power to the sensor. If the engine can start, it proves the problem lies in the sensor circuit.
9
5
Share

What does it mean when the car battery light is on?

When the car battery light is on, it indicates an issue with the battery system. The battery indicator light on the car dashboard is not normally lit. If the battery light is on before starting the vehicle, it means the alternator is not generating electricity and the battery is not charging. After the car is started, when the alternator begins generating electricity and the battery is in a charging state, the battery indicator light will automatically turn off. Reasons for the car battery light being on include: 1. Loose alternator belt or loose battery terminals; 2. Abnormal alternator charging or charging system malfunction; 3. Faulty car wiring; 4. Battery malfunction.
9
1
Share

Where is the fuse box of the Verano located?

The fuse box of the Verano is located below the original air conditioning control panel. You need to remove the left and right protective panels around the gear shift lever. After removal, there are four T20 screws to be taken out. Then remove the cigarette lighter and the cover plate, and the fuse box will be inside. The Verano is a mid-size sports sedan under SAIC-GM Buick. The car has a length of 4723 mm, a width of 1802 mm, a height of 1466 mm, and a wheelbase of 2700 mm. In terms of appearance, the Verano is equipped with a winged chrome grille, winged LED automatic sensing headlights, winged LED taillights, 17-inch ten-spoke two-tone aluminum alloy sports wheels, a fastback roof, etc.
14
5
Share

What Causes Excessive Pressure in Car Air Conditioning?

Reasons for excessive pressure in car air conditioning: 1. Insufficient coolant flow or excessively high water temperature; 2. Excessive scaling or blockage in condenser copper tubes or fins, resulting in poor heat exchange efficiency; 3. Overcharged refrigerant, manifested by hot air at the exhaust outlet; 4. Presence of air in the system, requiring complete evacuation and refrigerant recharge; 5. Expansion valve failure, indicated by heavy condensation or frost on the low-pressure pipe. Check if the expansion valve is correctly installed. If properly installed, replacement is necessary. The car air conditioning system is designed to cool, heat, ventilate, and purify the air inside the vehicle, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.