What to Do When a Vehicle Stalls Due to Road Flooding from Heavy Rain?

2 Answers
Neil
07/29/25 8:10am
You should immediately exit the vehicle and move to higher ground or push the car out of the water. Below is relevant information about stalling: 1. Causes of stalling: Automatic transmission models: Vehicles with automatic transmission do not stall easily, while manual transmission models may stall frequently due to poor driving skills. However, it is not impossible for automatic transmission vehicles to stall, which is usually caused by using low-quality fuel leading to engine carbon buildup and stalling. 2. Precautions: For automatic transmission vehicles stalling, the main cause is the use of low-quality fuel. One solution is to fill up with higher-grade fuel at reputable, larger gas stations, such as using 97-octane gasoline. Although it is more expensive, it can ensure a longer lifespan for your vehicle and better performance while driving.
Was this review help?
14
2
Share
Jeanette
08/12/25 11:22am
That day I encountered heavy rain and my car stalled in the floodwater. It's crucial to immediately turn off all power and avoid attempting to restart the engine, as water entering it can cause irreparable damage. Before pushing the door open, assess the water flow speed—if the water level is above your knees, don't stay in the car. Quickly grab your phone and wallet and move to higher ground, then immediately call for rescue. Remember to save your insurance company's towing hotline in advance; they handle water-damaged vehicles professionally and efficiently. Afterwards, contact a repair shop to tow the car for disassembly and inspection, and also check for any corrosion or damage to the vehicle's electrical system. When driving in the rain, always check weather warnings. If you encounter deep water, it's safest to detour—don't take chances by challenging flooded roads.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What is the appropriate lumen for car LED headlights?

Currently, there are three types of car headlights commonly used, listed in the order of their introduction: The first is the original halogen bulb, with a 55W halogen lamp producing 1000 lumens. Even though halogen technology is mature, there is little room for further improvement in brightness. The second type is the xenon lamp, with a 35W xenon lamp producing 3500 lumens, achieving 100 lumens per watt. The third type is the LED headlight, with a 35W LED lamp producing 3200 lumens, achieving 91 lumens per watt. Additional information: Xenon lamps are categorized into 120V, 240V, and 380V, with wattages ranging from tens to thousands of watts. Automotive xenon lamps are improved versions of industrial xenon lamps, operating at 12V with wattages of 35W and 55W. Most vehicles use 35W lamps, while a few use 55W lamps, which are mostly installed on high beams. Therefore, the lumen range is 3500-5500. Headlights, commonly known as "big lights," are installed on both sides of the front of the car to illuminate the road ahead. They can be configured as two-lamp or four-lamp systems. In a four-lamp system, the outer pair is typically dual-beam lamps for low and high beams, while the inner pair is single-beam lamps for high beams. High beams range from 35–60W with 3400-5900 lumens, and low beams range from 35–55W with 3400-5400 lumens.
4
2
Share

Where is the cigarette lighter fuse in the Envision?

The cigarette lighter fuse in the Envision is located inside the fuse box under the dashboard cover. The cigarette lighter itself is positioned below the center console. The cigarette lighter fuse is rated at 20A, and if it blows, the cigarette lighter will lose power. When you press the cigarette lighter, it automatically heats up and pops out after 5 to 8 seconds of heating, ready for lighting cigarettes. The installation and removal method for the cigarette lighter is as follows: 1. Unscrew the housing: Some car cigarette lighter sockets have a threaded rear housing that can be unscrewed counterclockwise and reinstalled by turning clockwise. 2. Remove screws: Some cigarette lighter sockets are secured with screws; simply use a wrench to remove them for disassembly and reinstall by tightening the screws. 3. Remove the panel: The gearshift lever panel is attached with plastic clips and can be pried open by hand or with a flathead screwdriver to fully detach it. 4. Remove panel screws: After removing the gearshift lever panel, the cigarette lighter panel door will open automatically, revealing two black screws that can be removed with an M4 hex wrench. 5. Remove the panel box: Pull the cigarette lighter's plastic panel box out by hand. When it's extended about 10 cm, disconnect the wiring before fully removing the entire box. 6. Operate the inner and outer rings: The cigarette lighter consists of inner and outer rings. Press the inner ring to activate heating; once it reaches the desired temperature, the inner ring will pop back to its original position, allowing you to pull out the lighter by holding the outer ring.
2
5
Share

What does 'stop' mean on a car?

On a car, 'stop' refers to a mandatory parking alarm. When this situation occurs, the engine operation should be stopped promptly. The stop light is not a standalone indicator; it illuminates when any component on the dashboard malfunctions. The main reasons for the stop warning light to activate are: 1. Low oil pressure; 2. Low brake fluid level; 3. Overheating coolant temperature. Dashboard indicator lights in a car include: ABS indicator, EPC indicator, seat belt indicator, battery indicator, oil pressure indicator, fuel level indicator, door ajar indicator, airbag indicator, brake disc indicator, parking brake indicator, coolant temperature indicator, engine indicator, turn signal indicator, high beam indicator, washer fluid indicator, fog light indicator, and position light indicator.
9
3
Share

Is it necessary to turn on the cabin overheat protection?

You can turn it on or leave it off. Turning it on is good for the car, while leaving it off is good for the battery (reduces power consumption and charging frequency). Tesla's cabin overheat protection is designed to prevent owners from forgetting children or pets in the car, which could lead to safety hazards due to overheating in the enclosed cabin. Below is an introduction to Tesla vehicles: 1. Brand Introduction: Tesla is an American electric vehicle and energy company that manufactures and sells electric cars, solar panels, and energy storage systems, headquartered in Palo Alto. 2. Powertrain Composition: Unlike traditional gasoline-powered vehicles, Tesla's powertrain mainly consists of four components: the energy storage system, power electronics module, electric motor, and sequential manual transmission.
10
5
Share

How to Deal with Foggy Rearview Mirrors?

The solutions for foggy rearview mirrors are: 1. Turn on the heating system of the car's rearview mirrors; 2. Switch the car's air conditioning to the external circulation mode. Rearview mirrors are located on both sides of the front of the car and inside the car's front. Methods to prevent rearview mirrors from fogging up include: 1. Clean dust and sand from the glass and apply soapy water to the glass surface; 2. Install rain deflectors on the rearview mirrors; 3. Apply wax to the rearview mirrors. The functions of rearview mirrors are: 1. Observing the road conditions behind; 2. Monitoring rear-seat passengers; 3. Judging the distance from the vehicle behind during emergency braking; 4. Expanding the driver's field of vision.
13
2
Share

What's the reason for the SOS malfunction in the 2021 Lavida?

Here is an introduction to the SOS malfunction in the 2021 Lavida: 1. Causes: (1) The software version is too outdated; (2) Sponge-like objects entered the antenna during assembly; (3) Damage to the control unit caused by defects in its software version. 2. Taking the Lavida 2021 1.5L Manual Comfort Edition as an example: The Lavida 2021 1.5L Manual Comfort Edition has a top speed of 190 km/h, a body type of a 4-door 5-seater sedan, a fuel tank capacity of 51L, front suspension using MacPherson strut independent suspension, and rear suspension using torsion beam non-independent suspension.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.