What to Do When a Toyota Car Suddenly Won't Start?

What are the new driving license regulations in 2020?

The new driving license regulations in 2020 are as follows: 1. Implement nationwide 'one-certificate examination' for small car driving licenses: Applicants can apply for a small car driving license anywhere in the country with their resident ID card, without submitting a residence registration certificate. Residents from Hong Kong, Macao, and Taiwan can apply with their residence permits for Hong Kong, Macao, and Taiwan residents. 2. Implement inter-provincial subject tests for small car driving licenses: If an applicant who is applying for a small car driving license has passed some subjects but needs to change their residence due to work, study, or life reasons, they can apply once nationwide to change the test location. The applicant can present their ID card to the local vehicle management office to continue taking other subject tests, and the passed subject test results remain valid. 3. Pilot the inter-provincial application for large and medium-sized passenger and truck driving licenses within the province: Applicants applying for large and medium-sized passenger and truck driving licenses within the province can apply directly with their resident ID card without submitting a residence registration certificate. For inter-provincial applications, after obtaining a residence permit in any location of the current province, they can also directly apply for large and medium-sized passenger and truck driving licenses within the province.

10

2

Share

What to Do When the Engine Warning Light Comes On in a Volkswagen Sagitar?

If the engine warning light comes on, follow these steps: First, check whether the engine is running normally and if there are issues such as shaking or emitting black smoke. If so, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can be started, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The car will perform a self-check after powering on. Wait for 5-10 seconds and observe whether the warning light on the dashboard turns off. If the warning light remains on, visit a service center as soon as possible to diagnose the issue. The service center can use a portable diagnostic tool to read the fault code, identify the problem, and perform targeted repairs. There are seven main reasons why the engine warning light may come on: 1. Sensor failure: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may become damaged, have poor contact, or experience signal interruption. When the car's ECU cannot accurately obtain engine data, the engine warning light will illuminate. 2. Fuel or oil quality issues: Using fuel or oil that does not meet the manufacturer's specifications may cause engine wear, leading to the warning light turning on. 3. Poor combustion of the air-fuel mixture: Poor combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate. Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can lead to poor combustion. 4. Turbocharger problems: Issues with the intake boost pipes or turbocharger can also trigger the engine warning light. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. 5. Intake problems: If the car's intake system is compromised, it may lead to clogged engine pipes, and in severe cases, the engine warning light will come on. A dirty or uncleaned air filter can cause intake issues. 6. Exhaust problems: Exhaust system faults can also trigger the engine warning light. Common causes include faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings. The catalytic converter is the most frequent culprit. Using leaded gasoline, lead- or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system issues can all lead to catalytic converter failure. 7. Anti-theft system malfunction: If the car's electronic anti-theft system fails or the anti-theft controller does not match the engine ECU, the anti-theft system may prevent the engine from operating normally, and the engine warning light will illuminate.

20

5

Share

What is the actual fuel consumption of the Buick GL8?

The fuel consumption range of the Buick GL8 is between 7.8L and 12.2L. The specific fuel consumption depends not only on the model but also on road conditions and driving habits. The average fuel consumption for the Buick GL8 2017 28T Comfort model is 11.09L/100KM, while the Buick GL8 2017 25S Comfort model averages 10.91L/100KM. The Buick GL8 is a commercial vehicle under SAIC-GM Buick. Here is more information about the vehicle: 1. The new Buick GL8 Business Travel vehicle retains the overall design of the second-generation Buick GL8, with the front grille updated from the original waterfall style to the latest winged design of the Buick family. This maintains the original business-oriented appeal while adding a dynamic touch, making it more attractive to a broader range of customers. 2. In terms of space, the new Buick GL8 Business Travel vehicle inherits the advantages of the second-generation Buick GL8, offering ample seating space. The aisle between the second-row seats is spacious enough to allow easy access for elderly passengers and children to the third row. 3. The Buick GL8 Business Travel vehicle is equipped with a 2.5L naturally aspirated engine and paired with GM's latest 6AT automatic transmission.

6

0

Share

What engine is used in the GAC Trumpchi PHEV?

The engine of the GAC Trumpchi PHEV is a hybrid power engine independently developed by GAC Group, belonging to a domestically produced engine. The engine model of the GAC Trumpchi PHEV is 4A15K2, with a maximum horsepower of 97, a maximum power of 71kW, and a maximum torque of 120 Nm. For daily maintenance of the GAC Trumpchi PHEV engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD-SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB-CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid faults, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

11

4

Share

What is the suitable tire pressure for the Arrizo 5?

The standard tire pressure range for the Arrizo 5 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Arrizo 5 is only equipped with a tire pressure monitoring system in the Premium version. The tire pressure value is displayed on the central LCD screen of the instrument panel. To display the tire pressure, simply press the combination instrument LCD adjustment button on the left side of the steering wheel to switch to the tire pressure monitoring system interface. Other versions of the model can have a tire pressure monitoring system installed, and the display interface can be enabled by reprogramming the instrument computer. Generally speaking, a tire pressure above 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread pattern, shortening tire lifespan; increased body vibration, indirectly affecting the lifespan of other components; excessive stretching of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and deviation, which are unfavorable for driving safety; increased movement of tire parts, leading to abnormal overheating due to excessive rolling; reduced functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplied increase in friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, with an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, an alarm is triggered when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the indicator light to come on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the sensor is damaged due to impact during driving, the tire pressure fault light will also come on. For sensor damage issues, the only solution is to replace it with a new component.

17

1

Share

What are the most damaging behaviors for automatic transmission vehicles?

Automatic transmission vehicles are most damaged by the following behaviors: 1. Do not tow the vehicle arbitrarily when it has a malfunction: When a car breaks down and needs towing, the automatic transmission cannot be directly shifted into neutral like a manual transmission, as this can damage the transmission. After a malfunction occurs, the transmission oil pump cannot operate, and the components lack lubrication and cooling. When the car is towed, the transmission is still in operation, which can cause damage. Before towing, it is important to determine whether the car is front-wheel drive, rear-wheel drive, or four-wheel drive. In any case, avoid towing the drive wheels of an automatic transmission vehicle. 2. Do not coast in N gear while driving: In the past, many people might have coasted in neutral to save fuel with manual transmission cars, but this is not advisable for safety reasons. Similarly, automatic transmission vehicles should not coast in N gear while driving because the transmission requires gear oil for lubrication. If the transmission is in neutral, the oil cannot properly lubricate the transmission, which may cause certain components to overheat or the gears to be damaged. In severe cases, the transmission may be ruined. 3. Do not shift into P gear before the vehicle has come to a complete stop: When parking, always engage the handbrake first so that the force is initially borne by the handbrake. Shifting directly into P gear puts all the force on the transmission, and if the car is hit by an external force while parked, it may cause internal damage to the transmission. 4. Shifting into R gear before the car has fully stopped: Automatic transmissions are much more delicate than manual transmissions. Engaging R gear while the car is still moving from D gear can cause a strong impact on the transmission, leading to premature failure. 5. Incorrect use of P and D gears: When waiting at a traffic light for about 30 seconds, you can stay in D gear with the foot brake engaged. For longer waits, shift into N gear with the brake engaged, but do not use P gear. If the car is hit hard while in P gear, the transmission can suffer significant damage. As automatic transmission vehicles gradually replace manual ones for their convenience, it is important to pay extra attention to driving habits and maintain good practices.

1

4

Share

What to Do When a Toyota Car Suddenly Won't Start?

What are the new driving license regulations in 2020?

What to Do When the Engine Warning Light Comes On in a Volkswagen Sagitar?

What is the actual fuel consumption of the Buick GL8?

What engine is used in the GAC Trumpchi PHEV?

What is the suitable tire pressure for the Arrizo 5?

What are the most damaging behaviors for automatic transmission vehicles?

The Difference Between W and Y Tires

How to Schedule Subject 4?

Why Can't I Bind the Registered Vehicle?

How to Deal with Mold in the Car?