What to Do When a Tire Loses Pressure?

1 Answers
MariaRose
07/29/25 2:42pm
Tire pressure loss requires careful parking to reduce tire pressure. Below is a detailed introduction to solutions for tire pressure loss: 1. Hazards of tire pressure loss: Low pressure increases tire body deformation, leading to cracks on the tire side and causing bending movements, resulting in excessive heat, accelerating rubber aging, fatigue of the cord layer, and breakage of the cords. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulder. Tire pressure, strictly speaking, refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car; damage to the engine will lead to the end of the car's life. Similarly, tire pressure is the blood pressure of the car, and its level has a crucial impact on the car's performance and power. 2. Precautions for tire pressure loss: When using the car, it is necessary to frequently check the tire pressure and inspect the tire surface for any damage. If the tire sidewall is punctured or scratched, it is recommended to replace it with a new tire directly. The sidewall of the tire is very fragile; if damaged, it generally cannot be repaired. Even if repaired, continuing to use it poses significant safety risks.
Was this review help?
14
2
Share
More Forum Discussions

How Often Should Full Synthetic Oil Be Changed?

Full synthetic oil can typically be changed every 10,000 to 12,000 kilometers or every six months, but the specific interval depends on the vehicle's driving conditions. Full synthetic oil has the following characteristics: 1. Better high and low-temperature performance; 2. Longer oil change intervals; 3. Suitable for harsher vehicle conditions; 4. High lubricity, low friction resistance, resistance to oxidation, and strong cleaning properties. Full synthetic oil is a type of artificially manufactured oil produced by chemically decomposing various natural substances and synthesizing them with other materials during the manufacturing process. Using full synthetic oil can extend engine life and reduce maintenance frequency.
16
5
Share

How Long After Car Window Tinting Can You Roll Down the Windows?

After car window tinting, you can roll down the windows after three days in summer, while in winter when the temperature is lower, it takes seven days. Due to differences in installation techniques, the time before rolling down the windows may vary. It is recommended that drivers consult the installer after the tinting is completed to avoid any abnormalities in the film during use. Reasons why you should not roll down the windows immediately after car window tinting: Because the tint film needs time to firmly adhere to the window, opening or closing the windows during this period can cause the edges of the newly applied film to peel or shift before it fully bonds. The windows of a car with newly applied tint film are usually tight, and during the opening and closing process, the edges of the tint film can easily curl or peel, damaging the film. If you accidentally roll down the windows, just be cautious not to do so frequently and avoid directing the air conditioning directly at the front windshield. Also, do not activate the rear defroster after rear window tinting. Benefits of car window tinting: Tinting helps block sunlight, effectively filtering it, and some films also reduce direct UV exposure inside the car. Tinting also enhances safety by preventing window glass from shattering into fragments that could injure passengers.
14
4
Share

Will a tire pressure of 3.0 cause a blowout on the highway?

A tire pressure of 3.0 is unlikely to cause a blowout on the highway, but this value is not normal. For safety reasons, it is recommended to reduce the tire pressure to the normal range before driving on the highway. The normal tire pressure range for most cars is between 2.3 and 2.5. Strictly speaking, tire pressure refers to the air pressure inside the tire. A tire pressure of 3.0 is significantly higher than the normal range. The reason it won't cause a blowout is that manufacturers generally recommend tire pressures with a 30% safety margin, and the maximum pressure a tire can withstand is as high as 3.5 to 4.2 MPa, meaning the tire's capacity is higher than the actual pressure.
3
3
Share

What is a Width Indicator Light?

Width indicator lights are installed on vehicles to indicate the width of the vehicle, serving as a warning to other drivers and following vehicles. They are a type of commonly used light. When the width indicator light switch is turned to the first position, the small lights that illuminate at the front and rear are the width indicator lights. These lights are often found on large vehicles such as buses, coaches, and trucks, with multiple lights on each side. When lit at night, they help other drivers see the length and width of the vehicle, thereby preventing traffic accidents. When driving on the road, if you see a vehicle moving slowly, zigzagging, or with hazard lights on, it indicates that the vehicle is in need of assistance or signaling for help. Hazard lights (also known as emergency flashers) are when the turn signals flash simultaneously, serving as a warning. For example, if a vehicle breaks down and is parked on the roadside, the hazard lights should be turned on to alert passing vehicles. They are also used in special situations, such as when emergency vehicles like police cars are performing their duties.
1
1
Share

What does on-demand four-wheel drive mean?

On-demand four-wheel drive refers to a system that automatically activates four-wheel drive only when the vehicle encounters situations requiring it, otherwise operating in two-wheel drive. Automotive four-wheel drive systems are categorized into full-time four-wheel drive, part-time four-wheel drive, and on-demand four-wheel drive. On-demand four-wheel drive does not require driver intervention; once poor road conditions or wheel slippage are detected, the computer automatically assesses and immediately redistributes the engine's torque output to the front two wheels, naturally switching to four-wheel drive mode. Compared to other four-wheel drive systems, on-demand four-wheel drive has a simpler structure, effectively reducing costs and overall vehicle weight. If a certain level of off-road capability is desired while also considering fuel economy, models equipped with on-demand four-wheel drive are worth considering.
3
1
Share

What is the difference between ethanol gasoline and regular gasoline?

Ethanol gasoline and regular gasoline differ in the following aspects: 1. Different characteristics: Ethanol gasoline uses fuel ethanol as a gasoline additive, which is environmentally friendly, clean, and renewable; regular gasoline uses chemical agents such as MTBE as raw materials for gasoline additives, which causes significant environmental pollution. Many countries have successively banned the use of MTBE and other additives. 2. Different evaporation potential: Ethanol has a greater evaporation potential, approximately twice that of regular gasoline; regular gasoline has a smaller evaporation potential. 3. Different advantages: Ethanol gasoline has a lower heat value compared to regular gasoline, with only 61% of the heat value of regular gasoline, requiring more fuel to travel the same distance; regular gasoline has good adaptability, smooth and gentle operation, is convenient and labor-saving to use, is lightweight, and produces less noise.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.