What to Do When a Tire Goes Flat on the Highway?

How to Check the Engine Serial Number?

Under the B-pillar on the passenger side, open the door to see it. This nameplate only specifies the year and month. The nameplate also notes the vehicle's chassis number. Additionally, the certificate of conformity that comes with the new car is located in the upper right corner of the certificate. The production date indicated here can be precise to the year, month, and day. Related precautions for engine disassembly: 1. Disassemble after the engine cools down: Disassembling after the engine cools down makes it easier to remove parts and prevents deformation during disassembly, as high temperatures weaken rigidity, making parts prone to deformation. 2. Avoid deforming the oil pan during removal: The Wuling B-series engine uses an iron oil pan, which is difficult to remove due to the adhesive on it. Avoid forcing it open at high temperatures to prevent deformation, which could lead to oil leaks after reassembly. The best method: Use specialized tools for removal. 3. Remove bolts in sequence: Removing bolts in order prevents breakage or deformation during disassembly. 4. Use specialized tools for inspection: After engine disassembly, each component needs to be inspected. Many experienced mechanics rely on visual or tactile methods, but for beginners or those with less experience, professional tools are necessary (and this is also the most accurate and recommended method). Follow the repair manual's instructions and use tools such as calipers, micrometers, and dial indicators.

4

Share

How much engine oil does the Kove 500X require?

The Kove 500X requires approximately 4L of engine oil for each maintenance service. The replacement interval is about 1 year or 10,000 kilometers. If the vehicle is driven less frequently, the oil can be changed once a year. However, for vehicles frequently used for long-distance travel or in poor condition, it is recommended to change the oil every 10,000 kilometers or every six months. Prolonged replacement intervals may potentially cause damage to the engine. Steps for changing the engine oil: Lift the vehicle, remove the protective plate, and place a container with a capacity of about 10 liters under the oil drain plug. Unscrew the drain plug and use an air gun to blow into the oil filler port for two minutes. After draining, tighten the drain plug and wipe it with a tissue to check for leaks. Reinstall the protective plate and lower the vehicle. Use a funnel to add oil through the filler port. Precautions when changing engine oil: Perform the change while the engine is warm to ensure the old oil is drained as thoroughly as possible. Add the appropriate amount of new oil. After adding the oil, start the engine and check all components for leaks. Run the engine for 3 minutes to confirm the oil level is at the normal mark.

18

1

Share

Is It Recommended to Buy a Test Drive Car with 5,000 Kilometers?

A test drive car with 5,000 kilometers can be purchased, but it must be well-maintained. New cars require regular maintenance to ensure better performance, especially during the initial break-in period. Below is relevant information about test drive cars: 1. Concept: A test drive car refers to a vehicle provided by a 4S store or car dealership for potential buyers to test drive. Generally, since the vehicle's various performance aspects are tested during the drive, drivers may engage in behaviors unsuitable for the break-in period, such as sudden acceleration or hard braking. Therefore, test drive cars are usually sold at a discount. Buyers should carefully consider their own situation before purchasing a test drive car. 2. Key Considerations When Choosing a Car: (1) Try to select a recently produced vehicle, preferably one manufactured within the last one or two months. (2) Pay attention to tire wear. For vehicles frequently used for test drives, tire wear can be a distinguishing factor. Buyers can compare the tires of several new cars to assess the vehicle's condition in detail. Normally, vehicles stored in a warehouse by the manufacturer and transported to the 4S store via freight will have minimal tire scratches. (3) Check the door handles and keys. Frequent door openings and closings often leave subtle traces. Additionally, vehicles with mechanical keys may show scratches around the lock due to repeated use. These details can help verify the authenticity of the vehicle.

2

4

Share

How to Deal with Abnormal Noises from Valve Tappets?

There are three main methods to address abnormal noises from valve tappets: 1. Valve leakage noise: Typically occurs outside the valve chamber, more noticeable under high load and low RPM conditions, with the noise intensifying as the load increases. The solution involves removing the cylinder head, lapping the valves, checking the valve spring tension, and readjusting the valve clearance. 2. Valve tapping noise: During engine idling, a continuous tapping sound occurs between the valve stem end and its driving component. The remedy is to readjust the valve clearance to the engine's standard specifications. If the locking nut on the adjustment screw is loose, it should be securely tightened. Severely worn components should be replaced, and broken valve springs must be replaced promptly. 3. Valve seat noise: Caused by seat ring detachment, rough valve seat surface, or substandard machining precision. The solution is to reinstall the valve seat according to assembly specifications, ensuring the upper surface is flush with the body plane and any protruding parts are ground flat.

14

2

Share

How to Use the Car Wiper Switch?

The method to use the wiper is to push the wiper control upward for an automatic return, which activates the wiper once, while downward it is divided into three gears. Below is relevant information about car wipers: 1. Basic Introduction: The wiper, also known as a windscreen wiper, is a device used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Due to legal requirements, almost all cars are equipped with wipers. Rear windows of vehicles such as hatchbacks and SUVs also have wipers. Apart from cars, other means of transportation like trains and trams are also equipped with wipers. Some engineering machinery, such as cranes, also have wipers installed. 2. Operating Principle: The power source of the wiper comes from an electric motor, which is the core of the entire wiper system. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The function of the worm gear mechanism is to reduce speed and increase torque, and its output shaft drives a four-bar linkage mechanism, which converts continuous rotational motion into left-right swinging motion.

5

0

Share

Will Polishing Damage the Car's Paint?

Car polishing does have an impact on the paint. Here is some relevant information about car polishing: 1. Introduction: Car polishing is a step in the car detailing process that is performed before waxing, sealing, or coating. This is because sealing or coating requires polishing first, and only a finely polished car can achieve a mirror-like finish. This is a necessary step for sealing. Without polishing, the paint surface will not be smooth, and the sealant will not last long, failing to provide long-term adhesion. 2. Function: It restores the mirror-like effect of the paint surface, fills in the pores of the paint, and enhances the gloss and luster of the paint. The coarseness of the polishing compound used depends on the level of oxidation of the paint. For example, coarse compounds like rubbing compound are used to remove deeper scratches but can cause more damage to the paint. If oxidation is not noticeable, as is often the case with new cars with good paint quality, you can choose not to polish when waxing or sealing.

6

2

Share

What to Do When a Tire Goes Flat on the Highway?

How to Check the Engine Serial Number?

How much engine oil does the Kove 500X require?

Is It Recommended to Buy a Test Drive Car with 5,000 Kilometers?

How to Deal with Abnormal Noises from Valve Tappets?

How to Use the Car Wiper Switch?

Will Polishing Damage the Car's Paint?

Is there a relationship between car air conditioning and water temperature?

Where is the Cadillac Air Conditioning Switch?

What is the correct method for jump-starting a car?

How to use the differential lock on the FAW JH6?