What to Do When a Tire Bulges?

What types of vehicles are prohibited from entering highways between 2:00 AM and 5:00 AM?

On highways, the type of vehicle prohibited from traveling between 2:00 AM and 5:00 AM is the large passenger bus, while other vehicle types are not affected. Here are the relevant details: The period from 2:00 AM to 5:00 AM is when the human body is most prone to fatigue, making it a high-risk time for drowsy driving. Since passenger buses carry a large number of passengers, any accident during this time could result in severe consequences. To ensure road safety and prevent fatigue driving among bus drivers, traffic authorities have prohibited large passenger buses from entering highways between 2:00 AM and 5:00 AM. Violations of this regulation may result in fines and a deduction of three points from the driver's license. Smaller passenger vehicles are not subject to this restriction and can still enter highways normally during these hours. However, drivers of smaller vehicles must remain alert to avoid fatigue driving and potential safety hazards.

2

1

Share

How long does it take to transfer a company-owned car to an individual?

There is no time limit for transferring a company-owned car to an individual, as long as the relevant procedures are completed in accordance with the regulations of the relevant departments. The so-called transfer from a company to an individual refers to the process of converting a company car into a private car. The owner's name changes from the company to the individual, and the name on the property certificate will also change from public to private. The required procedures for transferring a company-owned car to an individual are as follows: 1. The company's organization code certificate (original or copy) and the original IC card; 2. The original vehicle license; 3. The original vehicle registration certificate; 4. The vehicle supplementary form; 5. The vehicle and vessel tax certificate; 6. The original ID card and household registration of the individual.

2

5

Share

Is the left hand on a motorcycle the clutch or the brake?

For the left-hand control lever on a motorcycle, if it's a standard (sport) motorcycle, then it is the clutch, not the brake. If it's a scooter, the left hand controls the rear brake, while the right hand controls the front brake. Here is some related information: Clutch: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the rider can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. Motorcycles equipped with automatic transmissions do not have a clutch lever. When pulling the clutch lever, it should be done decisively to ensure quick and complete disengagement. When releasing the clutch lever, it should be done slowly and gently to ensure smooth engagement. Special Reminder: The correct method of using the clutch should be coordinated with gear shifting and throttle operation. To extend the lifespan of the clutch, avoid resting your fingers on the clutch lever while riding, as any vibration or movement of the vehicle may cause unintentional or subconscious movement of the lever, even slight actions, which can accelerate clutch plate wear. Some riders use only the clutch lever to slow down while riding, which is neither economical nor good for the clutch plates, as it accelerates wear. Brake: Also known as the braking system, it refers to the action of stopping or reducing the speed of a moving vehicle or machinery. The general principle of braking involves fixing a wheel or disc on the high-speed shaft of the machine and installing corresponding brake pads, bands, or discs on the machine base to generate braking torque under external force. Handlebar: Also called the steering handle, it is integrated with the front suspension system via bolts and controls steering, braking, acceleration, clutch disengagement and engagement, lighting, sound, and other operational components. The left hand controls the clutch or rear brake (on scooters), while the right hand controls the front brake and throttle. When operating, both hands should grip the center of the respective handlebars, with relaxed shoulders and elbows and slightly tightened armpits for better control of the brake, clutch levers, and other switches. It serves as the rider's system for balancing the vehicle and changing direction.

3

1

Share

What Causes the Steering Wheel to Shake Left and Right with Abnormal Noises?

Here is an analysis of the reasons why the steering wheel shakes left and right with abnormal noises: Stabilizer bar: Check if the stabilizer bar bushings are loose or damaged. If the stabilizer bar bushings are loose or damaged, it will not only cause abnormal noises when turning the steering wheel but also produce sounds when driving on uneven roads. Loose stabilizer bar bushings can be fixed by adding shims, while damaged ones must be replaced. Shock absorber bearing: If the noise occurs when lightly shaking the steering wheel left and right while stationary, it is likely due to a lack of lubrication in the shock absorber's thrust bearing. Open the hood and listen to see if the sound is coming from the top of the shock absorber. If the noise is from the shock absorber's thrust bearing, applying some lubricating oil to the bearing may help.

7

1

Share

What does the AC on Audi's air conditioning mean?

It refers to the daytime running lights. The function of daytime running lights is to make the vehicle more easily recognizable during daytime driving. Their purpose is not to help the driver see the road better, but to let others know that a vehicle is approaching. Therefore, these lights are not illumination lights but signal lights. The primary benefit of daytime running lights is not aesthetic but to enhance the vehicle's visibility. More related information is as follows: Light distribution performance of LED daytime running lights: The most crucial aspect of LED daytime running lights is their light distribution performance. Daytime running lights must meet basic brightness requirements but should not be too bright to avoid disturbing others. In technical terms, the luminous intensity on the reference axis should not be less than 400cd, and the luminous intensity in other directions should not be less than the product of 400cd and the percentage of the corresponding point in the light distribution diagram. In any direction, the light intensity emitted by the lights should not exceed 800cd.

15

2

Share

Will points be deducted immediately during Subject 2 test?

Generally, there will be no immediate voice announcement for point deductions. Only when the accumulated deductions exceed the passing score will the test end with a "failed" voice announcement. After the test is declared over, the voice announcement will specify the items for which points were deducted during the Subject 2 test. Below are some preparation tips before the Subject 2 test: Test mentality: Keep a calm mindset, learn to adjust yourself appropriately, and relieve nervousness. On-site practice: Generally, candidates can enter the test site for a few simulation practices before the test, which helps them understand the test site conditions and familiarize themselves with the venue.

12

1

Share

What to Do When a Tire Bulges?

What types of vehicles are prohibited from entering highways between 2:00 AM and 5:00 AM?

How long does it take to transfer a company-owned car to an individual?

Is the left hand on a motorcycle the clutch or the brake?

What Causes the Steering Wheel to Shake Left and Right with Abnormal Noises?

What does the AC on Audi's air conditioning mean?

Will points be deducted immediately during Subject 2 test?

What is the maximum speed limit for sedans on highways?

What is Porsche PCM?

How to Find the First Reference Point When Exiting the Right Reverse Parking?

Why can't the car accelerate beyond 60 mph?