What to Do When a Small White Spot Appears on the Windshield?

1 Answers
OAbigail
07/24/25 5:18pm
Solutions for a small white spot on the windshield: Use a repair tool to inject the repair fluid into the pit. Once the repair fluid fills and solidifies, it can cover the damage, prevent cracking, and serve a repair function. A small white spot on the windshield does not affect the glass's performance or safety, but it may affect aesthetics. However, it can be repaired. Daily maintenance methods for car windshields: 1. Proper use of windshield washer fluid: Drivers can reasonably use windshield washer fluid to address blurriness issues while driving. During regular glass maintenance, choose the appropriate washer fluid based on the season and weather conditions. 2. Car window tinting: Owners can opt for window tinting to effectively protect the car glass. However, the requirements for car window tinting are quite high, as the front windshield must have a light transmittance of more than 70% to ensure driving safety is not compromised.
Was this review help?
9
0
Share
More Forum Discussions

Can the Geely GL still start if the key fob battery is dead?

Geely GL can still start if the key fob battery is dead. Place the remote key against the one-touch start button, then press the one-touch start button. Active working method: The principle is to control the doors through the vehicle's electronic control unit (ECU) and body control module (BCM). Simply press the key button to send an unlock/lock command, which will be verified by the vehicle's electronic module to open/close the doors. Inductive working method: Primarily involves placing an encrypted chip inside the key. During the unlocking process, the vehicle's radio frequency transceiver verifies whether the key matches to determine if the engine can be started. This is mainly used in special situations where the key has no battery, allowing the car to still start normally. Passive working method: When the owner enters the sensing area of the key system, as long as the hand touches the door handle, the carried identification key will receive a low-frequency signal sent by the car. If this signal matches the identification information stored in the key, the key will be awakened.
17
3
Share

How to engage reverse gear in Haval H6?

Here are the methods to engage reverse gear in Haval H6: 1. For automatic transmission, simply shift to the position marked R to reverse; 2. For manual transmission, lift and push the gear lever to the position of first gear to reverse. Below are some relevant information: 1. Exterior, as an urban SUV, the straight roof line ensures good headroom inside the vehicle. Haval H6 performs well in terms of space. It also provides ample cargo space, with a trunk capacity of 808L, and when the rear seats are folded forward, the maximum expanded space can reach 2010L. 2. Configuration, standard features include headlight height adjustment, home light delay-off, four-way steering wheel adjustment, dual airbags, rear air conditioning vents, etc. High-end models are equipped with cruise control system, intelligent voice GPS navigation system, intelligent wiper and light control, side airbags and front-rear integrated side safety air curtains, ESP electronic stability system, and tire pressure monitoring system, among other intelligent and convenient configurations.
8
4
Share

How Often Should the Spark Plugs on a Jeep Cherokee Be Replaced?

The spark plugs on a Cherokee should be replaced every 40,000 kilometers. Under normal maintenance conditions, replacement is recommended between 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the owner's manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires in the correct firing order and secure the cover back in place.
12
4
Share

What does the letter H on a tire mean?

The letter H on a tire represents the speed rating of the tire. The speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions. Here is some relevant information about tires: Tires are circular elastic rubber products installed on various vehicles or machinery, mounted on metal rims to support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance. Below are the steps for replacing a tire: 1. Park the vehicle, turn off the engine, and apply the handbrake; 2. Place heavy objects in front of and behind the wheel to prevent slipping, and set up a triangular warning sign behind the vehicle; 3. Use a wrench to loosen the lug nuts of the tire to be replaced in a diagonal pattern; 4. Position the jack on the side of the vehicle where the tire needs to be replaced and lift the vehicle to a certain height; 5. Remove the lug nuts and take off the tire; 6. Install the spare tire or new tire, tightening the lug nuts in a diagonal pattern; 7. Lower the vehicle by releasing the jack and ensure that all nuts and bolts are securely tightened.
18
3
Share

What to Do When Accumulating 12 Points on the Driving License?

If a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management department of the public security authority shall detain their motor vehicle driving license. The driver must, within 15 days, attend a seven-day study session on road traffic safety laws, regulations, and related knowledge at the traffic management department where the driving license was issued. The classifications of driving licenses are as follows: 1. Introduction One: A1 for large buses and A3, B1, B2; A2 for tractors and B1, B2.M; A3 for city buses and C1; B1 for medium-sized buses and C1.M; B2 for large trucks and C1.M. 2. Introduction Two: C1 for small cars and C2, C3; C2 for small automatic transmission cars; C3 for low-speed trucks and C4; C4 for three-wheeled cars. 3. Introduction Three: D for ordinary three-wheeled motorcycles and E; E for ordinary two-wheeled motorcycles and F; F for light motorcycles; M for wheeled self-propelled machinery; N for trolleybuses; P for trams.
6
3
Share

Why does Mercedes CarPlay frequently disconnect?

Reasons why Mercedes CarPlay frequently disconnects: Data cable connection issues: This is a common problem encountered by many car owners. Due to the data transmission function of the cable, prolonged use can lead to failure, resulting in the cable only being able to charge but not transmit data. It is necessary to purchase a new data cable, preferably an original one or an MFI-certified data cable for connection. USB port issues: Frequent plugging and unplugging of the data cable can cause the USB port to become loose, have poor contact, or become damaged. It is necessary to check if these are the causes. If not, it is also important to check if the USB port current is too low. If the current is too low, it may result in the connection being established briefly before disconnecting, and re-plugging may temporarily restore the connection. If this is the case, it is necessary to increase the USB port current or use a one-male-two-female data cable, with one end connected to a power bank for use.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.