What to Do When a Scooter Stalls After Starting and Accelerating?

1 Answers
GemmaDella
07/30/25 10:31am
Preheating the engine to increase idle speed can solve the issue. If there is too much water accumulation at the bottom of the carburetor, drain the water through the oil drain port at the bottom of the carburetor. Replace the motorcycle-specific engine oil. If the engine's fault choke is too tight or too loose, or the piston rings are severely worn, repairs are needed.
Was this review help?
16
3
Share
More Forum Discussions

What Causes BMW to Shake When Starting Cold?

Reasons for BMW shaking when starting cold: 1. Dirty throttle body; 2. Excessive carbon deposits in the fuel injector or engine intake system, causing the required fuel during startup to be absorbed by the carbon deposits; 3. Mechanical failures in components such as the ignition coil, spark plugs, or fuel injector; 4. Insufficient power due to low oil pressure or cylinder pressure. BMW's headquarters is located in Munich, Bavaria, Germany. BMW's vehicle series include 1, 2, 3, 4, 5, 6, 7, 8, X, M, Z, and i. Taking the BMW 5 Series as an example, its body dimensions are 4841 mm in length, 1846 mm in width, and 1468 mm in height, with a wheelbase of 2888 mm. The rear-seat entertainment system is equipped with two 8-inch color displays, along with an infrared interface and wireless headphones.
13
3
Share

What type of engine oil is suitable for the Boyue 1.8T?

The Boyue 1.8T uses 5W40 grade engine oil. Engine oil, also known as motor lubricant, serves multiple functions including lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption and cushioning. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives are used to compensate for and enhance the performance limitations of the base oil. The dimensions of the Boyue are 4336mm in length, 1792mm in width, and 1498mm in height, with a wheelbase of 2600mm. The vehicle's safety features include an ACC intelligent adaptive cruise control system, 360-degree dynamic 3D panoramic imaging, and an in-car air purification management system among other devices.
7
2
Share

Where is the tire pressure monitoring sensor located?

Tire pressure monitoring systems are divided into direct tire pressure monitoring systems and indirect tire pressure monitoring systems, with their installation locations differing as follows: 1. Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire's air pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, and then the tire pressure data is displayed. When the tire pressure is too low or there is a leak, the system will automatically issue an alert. 2. Indirect tire pressure monitoring: The working principle of indirect tire pressure monitoring is that when the pressure of a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in its rotation speed being faster than that of the other wheels. By comparing the differences in rotation speed between tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor the air pressure.
1
4
Share

What Vehicles Can a Class B License Drive?

B-class driver's license holders are permitted to operate medium-sized passenger vehicles (including urban buses with a capacity of 10-19 passengers); heavy and medium-sized trucks; as well as heavy and medium-sized specialized operation vehicles. Application Requirements: Applicants must have held a C1, C2, C3, or C4 (Class C) driving license for at least three years with no full-point penalty records in the two most recent scoring cycles prior to application; or have held an A3 or B2 driving license for at least one year with no full-point penalty records in the most recent scoring cycle. Physical Requirements: Both thumbs must be fully functional, with at least three fingers on each hand being fully functional and normal limb and finger mobility; torso and neck must have no movement impairments; normal vision without red-green color blindness; ability to discern the direction of sound sources with each ear at a distance of 50 centimeters from a tuning fork.
6
3
Share

What do the numbers and letters on engine oil mean?

The numbers and letters on engine oil represent the following: Taking 5W30 as an example, the number before W indicates the freezing point temperature. The smaller the number, the lower the viscosity, the better the low-temperature fluidity, and the lower the applicable temperature. The number after W represents the kinematic viscosity of the oil at 100 degrees Celsius. The smaller the number, the lower the viscosity, the better the low-temperature fluidity, and the lower the applicable temperature. When using engine oil, ensure that the oil grade is correct and that the oil is genuine. Using counterfeit or substandard oil can damage the engine. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine.
2
3
Share

Why is the windshield wiper not moving?

Reasons why the wiper is not moving: 1. Open the engine cover and observe whether the transmission linkage is dislocated; 2. Check if the fuse is intact; 3. Disconnect the motor wire plug, turn on the power, and use a multimeter to measure if there is voltage; 4. If the fuse is intact but the motor has no voltage, check whether the wiring and the combination switch of the turn signal are intact; 5. Check for any burnt smell indicating a motor failure. The working principle of the wiper is: the motor on the wiper drives the output through the worm gear on the armature shaft and drives the output gear through the idler gear and idler shaft. The output arm connected to the wiper linkage is then manipulated by the output shaft. When the motor rotates, the output arm and linkage are driven to move back and forth.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.