What to Do When a New Energy Vehicle Charger Malfunctions?

Where is the cigarette lighter fuse located in the BMW 525?

The cigarette lighter fuse for the BMW 525 is located at the rear right side of the trunk. Below is more information regarding the cigarette lighter fuse for the BMW 525: 1. When replacing, you can refer to the manual to understand the ampere rating of the cigarette lighter fuse; 2. Keep a few spare fuses in the car for easy replacement anytime. The ampere rating of each fuse position is designed for safety. Additional information about the 2021 BMW 5 Series: 1. In terms of appearance, the 2021 BMW 5 Series continues the brand's family design language, featuring a flatter intelligent drag-reducing grille and large angel-eye LED headlights with an "open-eye" design. The M Sport package adds a bold aerodynamic kit and aggressive wheel styling. 2. The side profile of the car adopts a sculptural dual-waistline design that extends all the way to the Hofmeister kink, creating a seamless flow of lines. The dimensions are 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm.

8

4

Share

Method for Adjusting the Valves of the Teana?

Here is the method for adjusting the valves of the Teana: 1. Remove the cylinder head covers of the first, second, and third cylinders. Rotate the crankshaft to position each cylinder at top dead center, aligning the groove on the crankshaft pulley with the 0 mark on the first timing belt cover; 2. Check whether the timing marks on the two camshaft timing belt pulleys align with the timing marks on the fourth timing belt cover. If not aligned, rotate the crankshaft 360 degrees. Tighten the bearing cap fastening bolts appropriately in several steps to 19.6 N·m; 3. Inspect the intake valves of the first and fourth cylinders and the exhaust valve of the fifth cylinder. Then rotate the crankshaft 240 degrees and check the exhaust valves of the second and fourth cylinders and the intake valve of the sixth cylinder. Record all measured data exceeding the specified values and identify the valve numbers requiring adjustment of the clearance; 4. Remove the adjustment shims of all valves that need adjustment. To facilitate removal, it is best to position the cam lobes upward and use specialized tools; 5. Measure the thickness of the adjustment shims using a 0–25 mm outside micrometer. Calculate the thickness of the new shims to ensure the valve clearance meets the specified value.

11

0

Share

How to Set the Time on Chery Tiggo 3?

To set the time on the Chery Tiggo 3, follow these steps: 1. First, press the one-touch start button to start the vehicle's engine. 2. Then, press the MODE button on the left side of the multifunction steering wheel to enter the function adjustment mode. 3. The time adjustment settings will be displayed on the central control screen. 4. Press the SET button on the right side of the multifunction steering wheel and use the SET and RES buttons on the steering wheel to adjust the time. Below is an introduction to the Chery Tiggo 3: 1. Exterior: The new Tiggo 3 retains the overall design style of the previous model, with a more angular front fascia compared to the current version. The all-black grille incorporates some design elements from the Tiggo 8, but the headlight assembly remains largely unchanged. Additionally, the horizontal fog lights below the headlights enhance the vehicle's distinctiveness. The rear design shows no significant changes from the current model. 2. Dimensions: The new model measures 4420mm in length, 1760mm in width, and 1670mm in height, with a wheelbase of 2510mm. 3. Features: Depending on the version, the new model may vary in terms of daytime running lights, mudguards, anti-scratch strips, body decals, rear cameras, sunroof, wheel designs, exterior rearview mirrors, and chrome door handles. 4. Interior: The new model features gold-trimmed air vents and door handle accents, along with horizontal gold decorative elements, creating a simple yet aesthetically pleasing atmosphere. 5. Safety Features: The new model is equipped with ESP (Electronic Stability Program) and a tire pressure monitoring system to ensure driving safety and provide comprehensive protection for the driver.

10

2

Share

How to Check the Oil Dipstick on a Focus?

Steps to check the oil dipstick on a Focus: 1. Locate the oil dipstick, which is usually near the engine—either on top or on the side. The dipstick is identifiable by its pull ring. Simply pull it out. 2. Check the oil level when the vehicle is cooled down. After pulling out the dipstick for the first time, wipe it clean with a tissue, reinsert it, and then pull it out again to check the oil level. 3. If the oil level is between the upper and lower marks (clearly indicated by notches), the oil level is normal. The Focus is a compact car produced by Ford, featuring a 4-door, 5-seat sedan body style. Its dimensions are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm.

20

1

Share

What are the reasons for a thermostat failure?

Reasons for thermostat failure: 1. Extended warm-up time, electric flatbed trucks operating at lower water temperatures allow combustion gases and condensed water on cylinder walls to form acidic substances, corroding the cylinders; 2. Liquid fuel and water wash away the lubricating oil film on cylinder walls and flow into the oil pan, diluting the lubricating system's oil, leading to premature wear of components such as cylinder liners, pistons, and rings; 3. If the cylinder block has defects repaired with adhesive, the absence of a thermostat causes excessive temperature fluctuations between cold and hot, frequent contraction and expansion of the cylinder block can cause the adhesive to peel off, resulting in diesel engine malfunctions. The thermostat is a crucial component for controlling engine water temperature. Damage to this part can prevent the engine water temperature from being maintained within the range of 90 to 115 degrees Celsius. Exceeding this range can exacerbate wear between the cylinder and piston.

13

2

Share

What is the size of the Golf's wheel rims?

Golf's wheel rims come in sizes of 16 inches and 17 inches. The 1.4T model uses 16-inch rims, while the 2.0T model uses 17-inch rims. Common wheel rim sizes include 15 inches, 16 inches, 17 inches, 18 inches, and 19 inches. Smaller-sized rims are typically used on family sedans, while larger-sized rims are used on premium models. The Golf is a compact car under FAW-Volkswagen, featuring a 5-door, 5-seat hatchback body structure. The vehicle dimensions are 4296mm in length, 1788mm in width, and 1471mm in height, with a wheelbase of 2636mm. The suspension system adopts MacPherson strut independent suspension and torsion beam non-independent suspension.

11

0

Share

What to Do When a New Energy Vehicle Charger Malfunctions?

Where is the cigarette lighter fuse located in the BMW 525?

Method for Adjusting the Valves of the Teana?

How to Set the Time on Chery Tiggo 3?

How to Check the Oil Dipstick on a Focus?

What are the reasons for a thermostat failure?

What is the size of the Golf's wheel rims?

What are the reasons why the Lincoln MKC rearview mirror cannot unfold?

How to Adjust the Audio System in the 10th Generation Civic?

What is the Toyota Land Cruiser?

What is the battery model for the CX4 key?