What to Do When a Mercedes-Benz Car Fails to Start Due to Water Ingress?

1 Answers
McBrooklyn
07/30/25 12:45am
Simply turn the steering wheel forcefully while turning the key, and generally, the steering wheel lock can be quickly released, allowing the ignition to happen in an instant. Imagine if the car could be started in D or R gear; the sudden lurch of the vehicle at the moment of ignition would undoubtedly pose a significant safety hazard. One-key start systems sometimes face the issue of the smart key running out of battery. In such cases, you need to place the smart key on the start button and then press the button to start the car.
Was this review help?
10
4
Share
More Forum Discussions

How to Remove the Hub Center Cap on a Ford Focus?

Remove the spray nozzle on the front hood by gently prying it up from the bottom gap with a flathead screwdriver. A slight pry will cause the entire nozzle to come off. After removal, you will see a thin water pipe connector clipped into the nozzle's water inlet, secured by a black retaining ring. Use the flathead screwdriver to pry off this black ring. There are four of these small black pads in total, and the removal method is very simple: just pinch them with your fingers and twist counterclockwise to remove.
13
3
Share

How to Deal with Scratches on Rearview Mirrors?

Use a compound to treat the scratches, wiping in straight lines, then apply wax—start with coarse wax followed by fine wax, moving in the same direction from the inside out. For scratches that haven't damaged the primer and are slightly larger in area, a touch-up pen can be used as an emergency solution. Shake the paint inside the touch-up pen well before use, then apply the primer like nail polish. For more severe scratches that expose the primer, a paint repair is necessary. First, wash and dry the car, then apply a rust remover to the scratched area.
13
4
Share

How to Manually Reboot the Volvo Central Control Screen?

Try turning off the engine to see if the screen display can be restored. Use a paperclip or a toothpick, something relatively hard, and gently press the RST hole on the central control screen. Insufficient battery voltage or issues with the relay in the fuse box may cause the central control screen to reboot repeatedly. If repeated attempts fail to resolve the issue, it is recommended to visit a 4S shop for inspection of the relevant module. Replacement of the car's central control screen may be necessary in some cases.
15
4
Share

Where is the front passenger airbag located in the Jetta VS5?

The front passenger airbag in the Jetta VS5 is located above the glove compartment. All airbag positions in Jetta: The driver's front airbag is on the steering wheel, the front passenger airbag is above the glove compartment, and the side airbags are above the windows. This is provided that the vehicle is equipped with them. Function of airbags: Airbags are a passive safety protection system in vehicles that can save lives in critical moments. When a collision occurs, the airbags inflate and deploy instantly, reducing the probability of head injuries by approximately 25% and facial injuries by about 80%. Using airbags in conjunction with seat belts provides the best protection.
7
0
Share

How to Open the Fuel Tank Cap on the Edge?

When the vehicle is unlocked, simply press the fuel tank cap with your hand to open it. Please ensure the car is unlocked before attempting to open the fuel tank cap. The fuel tank cap can also be opened by pressing the fuel tank switch button inside the car. The electronic button is located on the left front door panel or on the center console. Some models require using the key to unlock the fuel tank cap. There might be a press-type or flip-open cap, which needs to be opened before using the mechanical key to unlock it.
18
3
Share

Where is the car air conditioning drain located?

Car air conditioning drain is located under the condenser in the cabin. The function of the air conditioning drain is: during air conditioning operation, the evaporator continuously absorbs heat from the surrounding air, causing moisture to condense into water which is then discharged through the drain. Car air conditioning, also called automotive air conditioning system, is used to regulate and control the temperature, humidity, air cleanliness and air flow inside the vehicle cabin to optimal conditions. The functions of car air conditioning are: 1. To regulate and control the temperature, humidity, air cleanliness and air flow inside the vehicle cabin to good conditions; 2. To provide comfortable riding environment for passengers; 3. To reduce travel fatigue and create good working conditions for drivers; 4. To ensure safe driving.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.