···
Log in / Register

What to Do When a Large Vehicle Reverses on a Highway Ramp with Cars Behind?

4 Answers
MacIsla
09/08/25 6:12am

Before entering the ramp, turn on the right turn signal and gradually adjust your speed to the posted speed limit. When preparing to merge out of the ramp, turn on the left turn signal and accelerate to the posted speed limit before the ramp ends, then merge into the lane.

Was this review help?
17
0
Share
OMolly
09/20/25 4:45am

Encountering a truck reversing on a highway ramp with cars following behind is truly dangerous. I usually prioritize my safety by immediately slowing down, pulling over to the shoulder or a safe spot, and turning on the hazard lights as a warning. Then, I promptly call for help, reporting the situation to traffic police via phone or the car's onboard system. At the same time, I stay calm, observe the scene, and avoid impulsively moving forward, as large trucks have significant blind spots that can easily lead to accidents. This is no joke—high speeds on highways mean even a slight lapse in attention can result in a collision, potentially causing a chain-reaction pileup. While waiting for assistance, I also use the horn or flashing lights to alert other vehicles to steer clear of the danger zone. One lesson I've learned from years of driving is never to underestimate such unexpected situations. Developing good habits beforehand, like slowing down early when entering a ramp to assess road conditions, can prevent many troubles. In short, safety comes first—don’t risk it just to save time.

Was this review help?
5
2
Share
Expand All
MacAdaline
11/03/25 5:09am

If a large truck suddenly starts reversing on a highway ramp and forces me from behind, I know I must act immediately. My personal advice is to decisively stop without hesitation, move to a safe spot, turn on hazard lights, and quickly call the police for help. Throughout the process, maintain sufficient distance from the truck because the driver's visibility is poor when reversing, making mistakes highly likely. I've experienced this situation before—it really gave me a scare, but timely action helped avoid a rear-end collision. Accidents like this on highways often have severe consequences, ranging from vehicle damage to life-threatening injuries. Reflecting afterward, I think practicing emergency responses regularly is crucial, such as periodically checking car tools like warning triangles to ensure they're functional. For prevention, it's best to plan routes in advance to avoid peak hours, which can reduce risks. Remember, your life is valuable—don't rush forward recklessly.

Was this review help?
8
0
Share
Expand All
LeElisa
12/17/25 5:09am

When encountering a large vehicle reversing on the highway ramp and blocking the way behind, my approach is to immediately stop, turn on the hazard lights, and call the police. Do not rush forward; stay away and observe the situation from a distance to avoid causing more trouble. Reporting to the police is crucial; clearly state your location and the scene.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

How to Break in a China V Standard Truck?

Precautions for breaking in a China V standard truck: 1. Maintain steady speed: During the break-in period, avoid exceeding speed limits. On highways, it's recommended to keep the truck speed around 80km/h. 2. No overloading: Strictly comply with legal regulations and avoid overloading. The cargo weight should preferably remain at about 70% of the truck's maximum load capacity. 3. Avoid sudden braking: Frequent hard braking can damage the vehicle's braking system, engine, and chassis. On long downhill sections of highways, use engine braking as much as possible to prevent prolonged braking that may cause brake system failure. 4. Regular inspections: During the break-in period, regularly check the truck's oil, water, and air systems to prevent malfunctions caused by deficiencies. Also perform scheduled maintenance to eliminate potential safety hazards.
7
4
Share

What Causes a Car Battery to Keep Making Noise?

The noise emitted by a car battery is caused by oxygen generated at the positive electrode diffusing to the negative electrode, where it combines with hydrogen produced at the negative electrode to form water. Meanwhile, the internal pressure of the battery increases as uncombined gases accumulate until it reaches the pressure required to open the safety valve, releasing the gases and producing the sound. It's important to note that if the battery is fully charged and the noise occurs without any significant load, it is likely due to poor contact between the bolts and wires, resulting in a discharge phenomenon that produces a buzzing sound. If the noise occurs during charging, it is the sound of the electrolyte, which is a normal phenomenon. When facing a situation where the car battery makes a clicking sound after charging, it is recommended to first connect the charging device to start the battery. If the clicking sound persists and the battery fails to start, it is advisable to take it to a professional repair shop to inspect the starter. To prevent this situation, follow these charging guidelines: First, ensure full charging and shallow discharging. Do not wait until the battery is completely drained before charging; charge it whenever possible, and make sure to charge it fully each time. Second, the battery can be used after the indicator light changes, but it is best to continue charging for an additional hour before disconnecting the power, not exceeding 2 hours. Third, if the battery is not used for an extended period, ensure a full charge every 20 days or so. Fourth, if the indicator light does not change after 8 hours of charging, disconnect the power and have the battery inspected to determine whether the issue lies with the battery or the charger. Prompt repairs are necessary to prevent overcharging and swelling of the battery.
18
4
Share

What is the horsepower of the 1.8t Passat?

According to FAW-Volkswagen manufacturer data, the 2015 1.8t Passat has 160 horsepower, while the 2017 1.8t Passat has 180 horsepower. Horsepower refers to the power output of a vehicle, and there is a positive correlation between a car's speed and its horsepower. The 2015 1.8t Passat measures 4870mm 1834mm 1472mm, with a maximum power output of 118kW and maximum torque of 250Nm. It is a 4-door, 5-seat sedan equipped with a 6-speed automatic transmission. The 2017 1.8t Passat measures 4872mm 1834mm 1484mm, with a maximum power output of 132kW and maximum torque of 300Nm. It is a 4-door, 5-seat sedan equipped with a 7-speed wet dual-clutch transmission. The latest Passat models come with three different power versions: 150 horsepower, 186 horsepower, and 220 horsepower. Details are as follows: The 150 horsepower Passat is equipped with a 1.4T turbocharged engine (model EA211-DJS), featuring a DOHC valve train, transverse layout, and an L-type 4-cylinder, 16-valve configuration. It delivers a maximum power of 110kW and maximum torque of 250Nm, paired with a 7-speed dry dual-clutch transmission. The engine reaches peak power at 5000rpm and peak torque between 1750rpm-3000rpm. It requires 95-octane fuel and uses direct injection technology. The front suspension is a MacPherson strut, while the rear suspension is a multi-link independent setup. The 186 horsepower Passat is equipped with a 2.0T turbocharged engine (model EA888-DPL), featuring a DOHC valve train, transverse layout, and an L-type 4-cylinder, 16-valve configuration. It delivers a maximum power of 137kW and maximum torque of 320Nm, paired with a 7-speed wet dual-clutch transmission. The engine reaches peak power between 4100rpm-6000rpm and peak torque between 1500rpm-4000rpm. It requires 95-octane fuel and uses combined injection technology. The front suspension is a MacPherson strut, while the rear suspension is a multi-link independent setup. The 220 horsepower Passat is equipped with a 2.0T turbocharged engine (model EA888-DKX), featuring a DOHC valve train, transverse layout, and an L-type 4-cylinder, 16-valve configuration. It delivers a maximum power of 162kW and maximum torque of 350Nm, paired with a 7-speed wet dual-clutch transmission (DCT). The engine reaches peak power between 4500rpm-6200rpm and peak torque between 1500rpm-4000rpm. It requires 95-octane fuel and uses direct injection technology. The front suspension is a MacPherson strut, while the rear suspension is a multi-link independent setup. MacPherson strut suspension: The MacPherson strut is a type of independent suspension and one of the most popular designs today, typically used for front wheels in passenger cars. Simply put, the MacPherson strut consists mainly of a coil spring and shock absorber. The shock absorber prevents the coil spring from shifting forward, backward, left, or right when under load, restricting movement to vertical vibrations only. The suspension's stiffness and performance can be adjusted by altering the shock absorber's length and tension. Multi-link independent suspension: A multi-link suspension consists of three or more connecting rods that provide multi-directional control forces, ensuring more reliable tire movement trajectories.
20
4
Share

Where to Add Refrigerant Oil for Car Air Conditioning?

Car air conditioning systems are generally charged from the low-pressure side. Here is some relevant information about car air conditioning: 1. Introduction: The car air conditioning device (air-conditioning-device), commonly referred to as car AC, is used to regulate and control the temperature, humidity, air cleanliness, and airflow inside the vehicle cabin to optimal conditions. It typically includes a refrigeration unit, heating unit, and ventilation system. This integrated system makes efficient use of the limited space inside the car, featuring a simple structure and ease of operation, making it a popular modern car air conditioning system internationally. 2. Maintenance methods for car air conditioning: Conduct a comprehensive inspection of the AC system. When using the air conditioning for the first time in summer, check the system thoroughly, such as inspecting the refrigerant level via the liquid storage tank, checking if the AC filter is too dirty, and whether there are any foreign objects in the radiator. Pay attention to cleaning the air conditioning system. The AC filter should be replaced regularly, and the condenser should also be cleaned periodically. After parking, do not turn off the air conditioning immediately. Drivers should turn off the cooling a few minutes before reaching the destination and switch to natural air to allow the temperature inside the AC ducts to rise, eliminating the temperature difference with the outside environment. This helps maintain relative dryness in the AC system, preventing mold growth.
10
1
Share

What is the recommended speed for making a U-turn?

When making a U-turn, the maximum speed should not exceed 30 kilometers per hour, and you must turn on the left turn signal in advance without obstructing other normally moving vehicles or pedestrians. Permissible situations for making a U-turn: Intersections with U-turn signs: If there is a clear U-turn sign at the intersection, you can make a U-turn. If there is a U-turn traffic light, follow its instructions. If there is no traffic light, make the U-turn based on the specific situation, ensuring it does not interfere with other vehicles or pedestrians. Intersections without explicit no-U-turn or no-left-turn signs: If there is no clear prohibition against U-turns, you can make one. "No explicit prohibition" means the intersection lacks signs like "No U-turn," "No Left Turn," or solid center lines, allowing you to proceed confidently. Yellow grid lines also permit U-turns: Yellow grid lines are no-parking zones marked at intersections prone to congestion due to temporary stops, important facility entrances, or other necessary locations. Parking (including waiting for traffic lights) on these lines is a violation. Although stopping is prohibited in yellow grid zones, U-turns are allowed as long as there are no central barriers, effectively treating them as "U-turn permitted." Intersections with U-turn traffic lights: This is straightforward—if there is a U-turn light, follow it; proceed only on green. Simultaneous no-left-turn and U-turn-allowed signs: This means U-turns are allowed but left turns are prohibited. Note that "No U-turn" is not the same as "No Left Turn." Key considerations when making a U-turn at an intersection: Check road markings—if they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable location. If there is a "No Left Turn" sign, even without a "No U-turn" sign, U-turns are still prohibited at that intersection because U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, you cannot make a U-turn at that intersection. Always yield to through traffic and only make a U-turn if it does not interfere with their movement. Otherwise, you will bear full responsibility for any accidents. Near intersection stop lines, lanes often have guiding arrows for vehicle direction. The leftmost lane may not always have a left-turn arrow—if it shows a straight arrow, U-turns are prohibited even without explicit "No U-turn" signs.
13
4
Share

What is the reason why the wiper of the new CRV cannot be turned off?

New CRV wipers cannot be turned off because the wiper is in automatic mode. The following is a related introduction about the wiper: Spraying windshield washer fluid: When using the wiper to remove dust from the windshield surface on a sunny day, be sure to spray windshield washer fluid and do not wipe dry. Hard dirt should be cleaned by hand: If there are other stubborn and hard dirt on the glass, it should be cleaned manually. These things can easily damage the wiper blade, causing the wiper to not clean properly. In severe cases, the wiper motor may also be affected. When lifting the wiper blade during car washing or daily cleaning, hold the "back" of the wiper and gently return it. Do not snap the wiper blade back suddenly.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.