What to Do When a Keyless Start Car Runs Out of Battery?

What is the wading depth of the Envision?

The maximum wading depth of the Envision is approximately 300mm. The wading depth of the Envision is determined by the height of the vehicle's chassis, which corresponds to the ground clearance listed in the model's parameter configuration. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, SUVs and off-road vehicles clearly have an advantage. However, for most compact and small cars with low ground clearance, the position of the vehicle's air intake should be used as a benchmark when navigating waterlogged roads. If the air intake of the Envision is below the water level during wading, water will be sucked into the engine cylinders. Since water cannot be compressed like air, this can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine air intake. Installing a snorkel can increase the height of the engine air intake, thereby improving the maximum wading depth. If wading is unavoidable, the following safe and correct procedures should be followed: Before entering the water, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in the water, which could lead to severe engine damage due to water ingestion. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Follow the path taken by other vehicles and drive at a low speed, avoiding sudden acceleration or deceleration. On roads prone to flooding, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine air intake, do not proceed and choose an alternative route instead.

2

1

Share

What does it indicate when the illumination distance of vehicle headlights changes from far to near at night?

When driving a vehicle at night and reaching the top of a slope, the illumination distance of the headlights changes from near to far, not from far to near. Below is a detailed introduction to the hazards of indiscriminate use of high beams while driving: Instantaneous Blindness: During nighttime encounters with oncoming vehicles, the dazzling light from high beams can cause temporary blindness to the opposing driver. The duration of this blindness varies depending on the driver's own vision and the surrounding environment, typically lasting around 2 seconds, significantly reducing the ability to observe surrounding pedestrians and vehicles in front or behind. Inability to Observe Through Rearview Mirrors When Rear Vehicles Use High Beams: When a vehicle behind turns on its high beams, large areas of glare appear in the three rearview mirrors of the vehicle in front. The glare in these mirrors reduces the visible range of the road ahead.

11

1

Share

What are the restrictions for out-of-town license plates entering Beijing?

There are traffic restrictions for out-of-town vehicles entering Beijing: 1. Restrictions for out-of-town passenger vehicles (1) During weekday morning and evening peak hours (7:00-9:00 and 17:00-20:00), vehicles are prohibited from driving on the main roads, auxiliary roads, and roads within the Fifth Ring Road. (2) On weekdays from 9:00 to 17:00, vehicles must comply with the city's tail number restriction policy, with the same restricted tail numbers as Beijing-licensed vehicles. The restricted area includes the main roads, auxiliary roads, and roads within the Fifth Ring Road. (3) The following roads are prohibited for passenger vehicles with out-of-town license plates (including temporary plates): the main road of the Second Ring Road, sections of Chang'an Avenue and its extension from Xinxing Bridge (excluded) to Guomao Bridge (excluded), East and West Square Roads, North and South Chizi Streets, North and South Heyan Streets, Fuyou Street, North and South Chang Streets, People's Congress Hall West Road, Zhengyi Road, Taiji Chang Street, Xi'anmen Street, Wenjin Street, Jingshan Front Street, Wusi Street, Di'anmen Inner Street, Jingshan Back Street, Jingshan West and East Streets, and the west branch of Xishiku Street. (4) The eastern section of Lingjing Hutong (from Fuyou Street to South Huangchenggen Street) is prohibited for motor vehicles with out-of-town license plates (including temporary plates). 2. Restrictions for out-of-town freight vehicles (1) From 6:00 to 24:00 daily, all out-of-town freight vehicles are prohibited on roads within the Sixth Ring Road (inclusive). (2) From 0:00 to 6:00 daily, out-of-town freight vehicles (excluding those transporting fresh agricultural products) entering roads within the Sixth Ring Road (inclusive) must obtain an entry permit. (3) Diesel freight vehicles meeting National III emission standards are prohibited from entering roads within the city's administrative area at all times. (4) The following roads are prohibited for out-of-town freight vehicles 24 hours a day: Chang'an Avenue, South and West Roads of the People's Congress Hall, East and West Square Roads, North and South Chizi Streets, North and South Chang Streets, Fuyou Street, Wangfujing Street, Taiji Chang Road, Zhongguancun South Road, Academy of Sciences South Road, Sanlihe Road, Wanshou Road, Zhugezhuang Road, etc.

6

5

Share

What is the scientific name of the throttle?

The scientific name of the throttle is the accelerator pedal. Below is relevant information about the car throttle: 1. The function of the car throttle: In gasoline engines, the throttle does not control the fuel injection volume but rather the opening size of the throttle valve. A smaller opening results in less air-fuel mixture entering the cylinder, leading to lower engine power output, and vice versa. 2. Solutions for a heavy throttle: If the throttle feels heavy, you can perform a fuel system cleaning. Alternatively, try accelerating further to see if the engine revs increase but the speed does not. If this occurs, it may indicate a damaged sensor in the transmission, which has locked the overdrive gear.

13

2

Share

Is the CEA engine an EA888?

CEA engine is part of the EA888 series, produced by FAW-Volkswagen Engine (Dalian) Co., Ltd. at the Dalian Powertrain Manufacturing Plant. The CEA engine model is the second-generation EA888, with a maximum power output of 118kW, maximum torque of 250Nm, and maximum horsepower of 160. For daily maintenance of the CEA engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts separate and can clog filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

3

5

Share

Where is the tire pressure reset button on the Mitsubishi Outlander?

The tire pressure reset button on the Outlander is located near the air conditioning vents. The rightmost button among the three is the reset button. Owners can refer to the user manual for guidance. Tire Pressure Reset: Tire pressure reset is an operation to reset the tire pressure monitoring system after addressing a tire pressure fault. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. Release the button after hearing a "ding" sound. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete. What to Do If Tire Pressure is Low: If no visible damage is found, simply inflate the tire to the normal pressure and reset the tire pressure system. If a puncture is detected during inspection, drive to a tire repair shop promptly for a patch, then reinflate the tire. If the low tire pressure warning reappears some time after inflation without any puncture, it might be due to air leakage caused by a deformed wheel rim. In this case, it is advisable to inspect the wheel rim and consider replacing it.

13

1

Share

What to Do When a Keyless Start Car Runs Out of Battery?

What is the wading depth of the Envision?

What does it indicate when the illumination distance of vehicle headlights changes from far to near at night?

What are the restrictions for out-of-town license plates entering Beijing?

What is the scientific name of the throttle?

Is the CEA engine an EA888?

Where is the tire pressure reset button on the Mitsubishi Outlander?

What Causes Severe Jerking After an Oil Change?

What is the wading depth of the BYD Han?

Will Insurance Companies Compensate for Flood-Damaged Vehicles?

What is the reason for the car air conditioner losing pressure after a few days of use without leakage during pressure testing?