What to Do When a Hose Gets Stuck in the Fuel Tank?

2 Answers
JasonDella
07/24/25 10:32pm
Lift the outermost fuel tank cap, but you can't pour fuel directly into the tank using a bottle. Call the 4S dealership, and they mention there's an anti-theft fuel device inside; inserting a hose will get it stuck by several layers of valves.
Was this review help?
17
0
Share
DeArya
08/10/25 3:05pm
If you encounter a hose stuck in the fuel tank, I suggest staying calm. Once, my own car had a hose jammed while refueling. I gently tried wiggling it left and right to see if it was an angle issue causing the blockage. If it doesn’t budge, don’t force it out to avoid damaging the tank’s seal or causing a fuel leak. Safety first—if you smell gasoline, immediately move away from the vehicle and call a professional mechanic for help. For prevention, ensure the hose is inserted straight when refueling, without tilting or twisting. Aging hoses are also prone to sticking, so regular inspection, replacement, or choosing softer materials can reduce malfunctions. Wear gloves to avoid oil stains and take your time—stay calm, and even small issues can be resolved safely.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

How to Release the Clutch When Shifting Gears?

After starting the engine, depress the clutch pedal, engage the gear, and release the handbrake. Gradually press the accelerator while slowly releasing the clutch with your left foot. As the engine RPM drops, continue releasing the clutch while gradually increasing the throttle. After fully releasing the clutch, maintain the throttle position. Once the vehicle speed increases and there is sufficient engine RPM, you can proceed to shift gears. After engaging the gear, slowly release the clutch with your left foot while gradually pressing the accelerator with your right foot.
16
5
Share

How to Check the Location of a Private Car?

Install a GPS tracking system for the vehicle. Without GPS, the vehicle's location cannot be tracked. GPS tracking allows real-time and precise geographical location queries. Most smartphones come with a "Smart Car Finding System" installed. Locate and open the car-finding system on your phone. On a computer, use the GPS vehicle monitoring system, then click to enter and monitor the car, enabling real-time queries of the car's location information. After opening the car-finding system, enter your license plate number to use GPS to locate the car's position.
6
0
Share

How to Safely Transport a Gas Cylinder in a Car?

The gas cylinder must be placed upright and transported over short distances. For almost all sedans, it is impossible to place the gas cylinder upright; SUVs can do this, but it must be securely fastened to prevent the cylinder from shaking or colliding in the trunk. Gas cylinders must not be placed inside the passenger compartment, as this constitutes mixed loading of passengers and cargo in a passenger vehicle. Passenger vehicles are not allowed to carry cargo except in built-in luggage compartments or external roof racks. Transporting flammable and explosive items such as liquefied gas requires the use of hazardous material transport vehicles that meet national standards.
7
4
Share

How to Switch Between Recirculation and Fresh Air Mode in Audi A5?

Locate the air conditioning control area inside the vehicle, which is positioned below the center of the dashboard. The upper and lower buttons on the right side are for adjusting the recirculation/fresh air mode and turning off the air conditioning. The fresh air mode button is located below the dashboard, and the middle button controls the recirculation/fresh air mode. When the button is pressed and the indicator light turns on, it indicates the recirculation mode is activated. Pressing the button again to turn off the indicator light means the fresh air mode is activated. As long as the recirculation mode is not turned on, the fresh air mode remains active. Normally, the fresh air mode is used by default.
6
1
Share

How to Check Vehicle Owner Information by Engine Number?

File a report with the local traffic department. Vehicle owner information is confidential and cannot be privately queried. Only traffic police, lawyers, and vehicle management offices are authorized to access such information. Follow the legal procedures of the public security department to visit the vehicle management office and provide the actual license plate number to the administrative authorities. The staff will input the provided license plate number into the computer system to retrieve detailed information about the vehicle owner, including name, ID number, home address, and other relevant details. Use this information to conduct a more detailed inquiry at the household registration management department of the local police station.
19
4
Share

How to Match After Power Disconnection for Audi?

Open the 'Diagnosis' on the computer, and click 'Select Your Own Test' on the 'Test Plan' page. In the test dialog box, select 'Match Battery After Update' and click the 'Add to Test Plan' option below. It will prompt 'Now Enter the 10-digit Battery Serial Number'. The serial number is located at a specific position. Enter the last ten digits of the number at the indicated position, omitting the first '5DO'. After entering, click 'Accept', and the matching will be successfully completed.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.