What to Do When a Geely Key Fob Runs Out of Battery?

1 Answers
LaEvelyn
07/28/25 9:47pm
Cars activated by smart cards have an induction area (a place to start the car in an emergency when the smart key runs out of battery). Generally, the induction area is located near the driver's seat, as most cars are designed to ensure convenience for the owner. When the key fob runs out of battery, you can start the car by placing the key against the one-touch start button. Otherwise, 90% of cars will have a WiFi arc symbol or a key symbol. When the battery is dead, you can look for items near the driver's seat, or prepare a spare battery (batteries are not cheap and may almost affect the lifespan of the circuit board) or a spare key.
Was this review help?
16
5
Share
More Forum Discussions

How Many Turns to Lock the Steering Wheel in a Car?

Turning the steering wheel to the right until it locks means turning it one and a half turns to the right, and turning it to the left until it locks means turning it one and a half turns to the left. Therefore, turning it back one and a half turns after locking it to the right will straighten the wheels, and the same applies to locking it to the left. If you turn the wheel half a turn to the right, turning it half a turn back in the opposite direction will straighten it. Below are some precautions: 1. If you imagine the steering wheel as a clock face, the correct hand position is to place your left hand between the 9 and 10 o'clock positions and your right hand between the 3 and 4 o'clock positions. In the event of a collision, this posture provides better support for your body. 2. If you only grip the steering wheel with four fingers and place your thumbs along the wheel, when the wheels hit a rock or a high curb, the front wheels may suddenly turn sharply, causing the steering wheel to spin rapidly, which could result in a broken thumb. 3. Improper steering during turns is a common cause of accidents. Therefore, it's best to reduce speed when turning. As you enter a curve, gradually turn the wheel according to the curve's radius. Begin straightening the wheel as the car's front starts to align, and fully straighten it before accelerating again. Remember not to focus on counting the number of steering wheel turns during a turn—focusing solely on the count rather than watching the car's direction can easily lead to accidents.
14
0
Share

What is broken when the mixture is too lean?

It is caused by a damaged intake sensor or a faulty front/rear oxygen sensor located on the muffler, leading to an excessively lean air-fuel mixture. Excessive carbon buildup in the vehicle's engine can cause improper feedback from certain components, prompting the onboard computer to determine that the vehicle's mixture is too lean. Below are explanations of engine carbon buildup and oxygen sensor damage: Engine Carbon Buildup: Carbon deposits include cylinder carbon buildup, throttle carbon buildup, spark plug carbon buildup, and intake carbon buildup, among others. These areas are directly related to the engine's power output. When there is excessive carbon buildup inside the engine, the vehicle's ignition energy decreases, intake efficiency drops, and ultimately, the engine's power is reduced, resulting in shaking and sluggish acceleration. Oxygen Sensor Damage: As an internal control unit in the vehicle, the oxygen sensor primarily monitors the air-fuel ratio of the engine. Once it is damaged, it will cause an imbalance in the engine's air-fuel ratio, inevitably leading to abnormally high fuel consumption. During driving, the exhaust pipe will emit darker-colored exhaust gases. In this case, the oxygen sensor should be replaced as soon as possible.
14
1
Share

How to install ETC?

The installation method of ETC is: 1. Check whether the ETC card and electronic tag are damaged. Press the anti-removal button on the back of the electronic tag, the red light will briefly light up, and the OLED screen will display the words 'Tag invalid, please insert card', indicating that the device is normal; 2. Clean the front windshield to keep the glass surface smooth and clean, then tear off the protective film of the back adhesive of the electronic tag, paste it to the installation position and press it with your hand for 2 to 3 minutes to remove bubbles; 3. Insert the ETC card with the front facing the driver and the back facing the front glass, and the chip part should be inserted into the electronic tag device. The ETC transaction sensing area is 8 meters. When encountering a vehicle in front stopping, in order to prevent the ETC device of the vehicle in front from malfunctioning or not having an ETC device at all, a distance of more than 10 meters should be maintained from the vehicle in front to prevent the automatic sensing from paying the fee for the vehicle in front.
4
0
Share

Why can't the Kia K3 start?

The reasons why the Kia K3 cannot start may include frozen exhaust pipe, valve gumming, poor working condition of the ignition system, blocked gasoline flow, or a dead battery. The reasons why the Kia K3 cannot start are as follows: 1. Frozen exhaust pipe: The water vapor after engine combustion freezes at the muffler of the exhaust pipe. If the ice from yesterday's short trip has not melted and today's ice has formed again, over time, it will affect the exhaust, and in severe cases, the car cannot start. The solution is very simple: place the car in a warm environment, and the ice will melt naturally, allowing the car to start. A thorough solution is to drive on the highway promptly. The heat from the exhaust will completely melt and expel the ice. 2. Valve gumming: In winter, especially after using unclean gasoline, the gum in the gasoline that cannot burn will accumulate near the intake and exhaust valves and the combustion chamber, making it difficult to start on cold mornings, or even preventing ignition. Emergency method: Drip some engine oil into the combustion chamber, and the car can generally start. After starting, go to the service station for a no-disassembly cleaning. In severe cases, the cylinder head needs to be disassembled and cleaned. 3. Poor working condition of the ignition system: On particularly cold days, due to the low intake temperature, the fuel does not atomize well in the cylinder. If combined with insufficient ignition energy, the result will be cylinder flooding, where too much fuel accumulates in the cylinder, exceeding the ignition limit concentration and preventing the car from starting. Emergency method: Unscrew the spark plug and wipe off the oil between the electrodes. After reinstalling, the car can start. A thorough solution is to check the ignition system and eliminate the causes of low ignition energy, such as spark plug electrode gap, ignition coil energy, and high-voltage line condition. 4. Blocked gasoline flow: This often occurs on particularly cold mornings and is caused by long-term dirt in the fuel line. When the temperature is extremely low, water and debris mix, blocking the fuel line and preventing the car from starting. Emergency method: Place the car in a warm environment, and it will start after a while. Alternatively, thoroughly clean the fuel line to solve the problem.
11
4
Share

Can a Motorcycle Run Continuously for 5 Hours?

Motorcycles can run continuously for 5 hours. Here is the relevant introduction: Motorcycle: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars. It is lightweight, flexible, and fast, widely used for patrols, passenger and cargo transportation, and also serves as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. Origin: In 1885, German Gottlieb Daimler installed an engine into a framed machine, giving birth to the world's first motorcycle. Motorcycle sports related to motorcycles are a type of military sports event, a competitive sport using motorcycles as equipment, divided into two-wheeled and three-wheeled models, with each model categorized into several classes based on engine cylinder displacement. Competition forms can be divided into off-road races, multi-day races, road races, track races, and touring races, among others. Rankings are determined based on speed or riding skills.
2
0
Share

Can motorcycle odometer tampering be detected?

Motorcycle odometer tampering cannot be detected. Here is the relevant introduction: Motorcycle: A motorcycle is a two- or three-wheeled vehicle driven by a gasoline engine and steered by handlebars. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also serves as sports equipment. Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. Origin: In 1885, German Gottlieb Daimler installed an engine into a framed machine, giving birth to the world's first motorcycle. Related to motorcycles, motorcycle sports are a type of military sports event, a competitive sport using motorcycles as equipment, divided into two-wheeled and three-wheeled models, with each model categorized into several classes based on engine cylinder displacement. Competition formats include cross-country races, multi-day races, road races, circuit races, and touring races, among others. Rankings are determined based on speed or driving skills.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.