What to Do When a Ford Car Shows High Engine Temperature?

1 Answers
DelOlive
07/29/25 3:28pm
Ford car shows high engine temperature solution is: 1. Stop and check whether the radiator coolant is normal, and whether there is any leakage in the radiator or water pipes. If no abnormality is found through external inspection, you can replenish the coolant and continue driving; 2. If the temperature remains high after driving for a distance, and the coolant is found to be reduced after stopping and checking, it may be due to a perforation in the water jacket of the cylinder block causing coolant loss, leading to high temperature. This fault requires repair. Taking the Ford Focus 2021 Sedan 1.5L Manual Fengyue model as an example, its body dimensions are 4647mm in length, 1810mm in width, 1468mm in height, and the wheelbase is 2705mm.
Was this review help?
2
0
Share
More Forum Discussions

How to Determine if the Drier Bottle is Faulty?

Methods to determine if the drier bottle is faulty are as follows: Check the sight glass on top of the drier bottle for any moisture condensation. If faulty, the air blown by the AC will not be very cool. Situations requiring drier bottle replacement are as follows: 1. Significant temperature difference: When the drier bottle is clogged, the temperature differs between the upper and lower parts. If there's a notable temperature difference when touching the connecting pipes at both ends of the receiver, replacement is necessary. 2. Contamination blockage: If there's contamination or ice blockage in the system, replacement is required. 3. AC shutdown due to malfunction: If the AC has been shut down due to malfunction or the system has been disassembled for an extended period, replacement is necessary. 4. Leakage in the receiver body: If there's leakage in the receiver body, replacement is mandatory. 5. Malfunctioning pressure control switch: If the pressure control switch of the receiver fails, replacement is required (the pressure switch can also be replaced separately).
14
1
Share

How Long is the Panamera?

The dimensions (length*width*height in mm) of the Porsche Panamera are 5015*1931*1418. Below is relevant information about the Panamera: 1. Introduction: Porsche's Panamera is a 4-door, 5-seater coupe. As a luxury coupe, it boasts rapid acceleration, with the top model achieving 0-100 km/h in 3.8 seconds and a top speed nearing 310 km/h. The mid-range models vary between 4.2 to 5.4 seconds for the 0-100 km/h sprint, rivaling supercars. 2. Configuration: The car excels in cabin quietness and handling feedback, featuring luxurious interiors. However, the interior color options are limited, and customization possibilities are minimal, with no professional-grade modification facilities available domestically—only suspension and tire enhancements are feasible. (All models come with a 7-speed dual-clutch transmission, ensuring first-class power delivery. Mid-range and top models feature all-wheel drive, Porsche's signature horizontally opposed engine, and rational weight distribution to maintain a low and stable center of gravity for high-speed stability. The suspension is air-based, adjustable in height and stiffness to cater to either racing or comfort preferences).
7
5
Share

What Does Intelligent Cylinder Deactivation Technology Mean?

Intelligent cylinder deactivation technology refers to a system where, when the engine operates under medium to low load conditions, certain cylinders are deactivated (put to sleep) through a series of methods while the remaining cylinders continue to function normally. This helps reduce fuel consumption and exhaust emissions. When higher power output is required, all cylinders are reactivated to ensure sufficient power delivery. Below are relevant details: 1. Application of Intelligent Cylinder Deactivation Technology: This technology is typically used in multi-cylinder, large-displacement engines such as V8, V10, and V12 engines. The advantage of variable cylinder technology lies in its ability to shut down some cylinders during low-load operation or deceleration, using only the remaining cylinders to reduce fuel consumption. 2. Fuel Efficiency of Intelligent Cylinder Deactivation Technology: When the vehicle requires high power output, such as during rapid acceleration or climbing, the system automatically reactivates all cylinders to provide adequate power. This balances both fuel economy and performance, achieving intelligent power management. Additionally, when some cylinders are deactivated, the system increases the workload of the remaining cylinders, indirectly improving their fuel efficiency and reducing overall fuel consumption. Typically, this can save around 8% in fuel consumption.
1
2
Share

What is the correct way to use D+ and D- in automatic transmission?

Here is the correct way to use D+ and D-: 1. When going downhill, you can shift up to D2 or D3 using "D+": When going downhill, you can shift up to D2 or D3 using "D+". Downhill driving requires the engine braking effect, and gears 2/3 can meet the power demand without needing the high torque of 1st gear. Sometimes, when climbing uphill with sufficient power, you should also use "D+" to upshift to prevent power waste and damage to the engine and transmission. 2. Use "D-" to downshift when going uphill: Uphill driving requires greater power, so you should use "D-" to downshift the vehicle and obtain higher torque for climbing. Similarly, if you encounter a situation where the vehicle is accelerating too quickly downhill, you should also use "D-" to downshift and control the speed. In addition, "D-" can also be used for short-term overtaking or in congested road conditions.
18
3
Share

What is the range of the new Chery Ant?

The new Chery Ant has a range of 400KM. The Chery eQ1 continues with its lightweight and cute design style. The front face features an "X"-shaped air intake grille, and the new model offers up to five color options, including Moonlight White, Titanium Gray, Lava Red, Lemon Yellow, and Cherry Blossom Pink. Here are more details: 1. Dimensions: The length, width, and height are 3200/1670/1550mm respectively, with a wheelbase of 2150mm. 2. Interior: The highlight of the new car is also in the color options. The interior color palette has been expanded to include Mint Green, Lychee White, and more. The seats are well-padded, combining faux leather and fabric for a good texture. Apart from this, the overall design largely maintains the same style as the previous model. 3. Features: The combination of a 10-inch central LCD display and an equally large 10-inch central touchscreen enhances the interior's high-tech feel. The three-spoke steering wheel has a youthful appearance and a good grip, further improving the driver's control. Additionally, the new car still uses a rotary knob and comes with an electronic parking brake.
17
2
Share

Why is running a red light at dawn considered okay?

Running a red light at dawn is still a violation, as any instance of running a red light constitutes a traffic offense. The criteria for determining a red-light violation involve the electronic eye capturing three photos: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels passing the opposite stop line. Only when all three photos are present will it be recognized as running a red light. How to check for red-light violations: Common methods include the following: You can check for red-light violations through the "Traffic Management 12123" app. After opening the app, log in using your ID card, then find and click on the "Violation Handling" option. Under "Violation Handling," you can view the current status of your vehicle. If there are any violations, the specific details will be displayed. Alternatively, you can visit the service halls of traffic police branches in various districts and counties to check using touch-screen terminals. Another method is to log in to the external service websites of the Public Security Traffic Management Bureau of each city: locate the "Vehicle Violation Inquiry" section, enter your license plate number and vehicle engine number, and click "Query." According to Article 2, Section 1, Clause 2 of the "Scoring Standards for Road Traffic Safety Violations," driving a motor vehicle in violation of traffic signal lights results in a deduction of 6 points per offense. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or no-entry markings results in a deduction of 3 points per offense.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.