What to Do When a China V Vehicle Suddenly Stops Using Urea?

Is the Bisu T5 Still in Production?

As of August 4, 2019, the Bisu T5 had not been discontinued. Here is more information about the Bisu T5: Body dimensions: The length, width, and height are 4715/1830/1780 mm, respectively, with a wheelbase of 2760 mm. Powertrain: The entire lineup is equipped with a 1.5T inline 4-cylinder turbocharged engine. The 2018 models are paired with an 8-speed automatic transmission, while the 2017 models come with a 6-speed manual transmission. The maximum power is 110 KW, maximum horsepower is 150 PS, and maximum torque is 215 N·m. The maximum power is achieved at 5500 rpm, and the maximum torque is available between 2000~4000 rpm. Drive system: All models are front-wheel drive. For suspension, the front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.

18

2

Share

What are the common issues with the PT204 engine?

The common issues with the PT204 engine include slight turbo lag when the turbo engages, and the 2.0T engine tends to be noisier at high RPMs. Below is a detailed introduction to the PT204 engine: 1. PT204 2.0T Low-Power Version: Maximum power 147kW (200 HP), maximum torque 320N·m (1200~4000 RPM). This level of 2.0T is clearly quite average, with the low-power tuning primarily aimed at reducing production costs or attracting consumer attention to the higher-priced high-power version. The curb weight of the Jaguar XEL has already reached 1730 kg, and the 147kW power reserve only achieves a maximum thrust-to-weight ratio of 115.6 Hp/T, which is typical for an 8-second 0-100 km/h acceleration. 2. PT204 2.0T High-Power Version: Maximum power 184kW (250 HP), maximum torque 365N·m (1300~4500 RPM). This power level is considered mid-to-high standard among 2.0T engines, with reasonable torque and a sufficiently wide power band delivering ample power and linear acceleration. The maximum thrust-to-weight ratio reaches 144.5 Hp/T, enabling a high-standard 7-second 0-100 km/h acceleration.

2

3

Share

What is the Principle of Supercharging?

Supercharging principle is to use the engine's own power to drive the turbine and then start boosting. The supercharger is connected to the engine crankshaft pulley via a belt, utilizing the engine speed to drive the internal blades of the supercharger, thereby generating pressurized air that is delivered into the engine intake manifold, increasing the intake air volume inside the engine and enhancing the engine's power. Here is more information about supercharging: 1. Advantages: Luxury cars place great emphasis on driving quality and comfort, and supercharging responds quickly without delay. Engines using supercharging technology have very smooth power output, which is why luxury cars prefer supercharging—it enhances driving comfort. 2. Working Principle: It consists of two parts, one is the exhaust turbine, and the other is the intake turbine. The intake turbine and exhaust turbine are connected coaxially; when the exhaust turbine rotates, the intake turbine also rotates. 3. Differences: The mechanical and turbocharging systems are different. The latter relies on exhaust gases to drive the turbine rotation, while supercharging uses a belt connected to the engine crankshaft pulley. As long as the engine is running, the supercharging system can operate.

12

5

Share

Can the Prado be registered?

The Prado cannot be registered in some cities. Here is an introduction to the Prado: Sales Policy: Currently, all Prado models on sale comply with the China 5 emission standard. In cities where the China 6 standard has already been implemented, such as Shenzhen and Guangzhou, the Prado cannot be registered. Prado Advantages: As one of the best-selling models in Toyota's off-road vehicle family, the Prado's status is almost irreplaceable. The reason for its high status is its near-perfect reliability, coupled with good practicality, comfort, and elegance. Such performance is hard to find among models in the same class and price range, making it almost irreplaceable. Prado Interior: The fourth-generation Prado 150 series was launched in October 2009 and has been in production ever since. Despite nearly 10 years passing, its classic design still looks timeless. Whether in the wilderness or urban jungles, this familiar silhouette can be seen, proving its enduring vitality. The interior lacks overly flashy designs; it appears modest yet maintains quality. Large areas of soft materials provide a pleasant touch, and the silver and wood-grain trim accents are just right, creating a comfortable and natural overall look.

10

5

Share

Is Bentley Entirely Handcrafted?

Bentley is not entirely handcrafted. Here are the reasons why it's not fully handcrafted and an introduction to the handcrafted parts: Reasons why it's not entirely handcrafted: Tires, for instance, cannot be made by hand. If they were completely handmade, they would not meet quality standards. Handcrafting also involves combining exquisite manual techniques with advanced technological tools on the basis of using modern technical equipment. Handcrafted parts: Generally speaking, handcrafting refers to the final assembly of the car being entirely done by hand. Components such as the engine, steering wheel, gearbox, and starlight headliner are all assembled purely by hand. After these parts are assembled, the final vehicle assembly is carried out, which constitutes the handcrafting process.

17

0

Share

What is the valve clearance of Zongshen CB250?

The valve clearance of Zongshen CB is between 0.03 and 0.07 mm, and it is generally better to adjust it to 0.05 mm. Effects of excessive clearance: It causes abnormal metal knocking sounds. Excessive valve clearance in the engine will cause abnormal metal knocking sounds and leave marks on the rocker arm, valve stem, etc. Do not adjust the clearance too small for the sake of sound, otherwise it will easily wear the rocker arm and camshaft, and may cause difficulties in starting and unstable idle speed. Effects of insufficient clearance: Insufficient valve clearance in the engine will cause the valve to not close tightly when the engine is hot, resulting in air leakage, reduced engine power, and even burning of the valve.

3

2

Share

What to Do When a China V Vehicle Suddenly Stops Using Urea?

Is the Bisu T5 Still in Production?

What are the common issues with the PT204 engine?

What is the Principle of Supercharging?

Can the Prado be registered?

Is Bentley Entirely Handcrafted?

What is the valve clearance of Zongshen CB250?

Does Using 98 Octane Fuel Make the Car More Powerful?

How to Purchase Driving Test Insurance?

What is the normal tire pressure for a Fit?

What to Do If You're Stopped by Traffic Police Without Your Driver's License?