What to Do When a Car Tire Gets Punctured?
4 Answers
First, pull over to the side of the road, engage the parking brake, and turn on the hazard warning lights (flashers). Place a triangular warning sign 50 to 100 meters behind the vehicle. Retrieve the tools and spare tire from the trunk. Loosen the tire bolts slightly (do not remove them completely), (preferably use a stone or other object to block the other tires), then use a jack to lift the car, remove the punctured tire, and install the spare tire. Tighten the bolts, lower the jack, and then tighten the bolts once more. Pack up the tools and warning sign, and find a place to repair the tire. For a punctured tubeless tire, the solution is to repair or replace the tire. Tubeless tires, also known as low-pressure tires or vacuum tires, are divided into radial tires and bias tires. Tubeless tires have high elasticity and wear resistance, along with good adhesion and heat dissipation properties. Tires are one of the most important components of a car. Their main functions include: supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; transmitting traction and braking torque to ensure good adhesion between the wheels and the road surface, thereby improving the car's power, braking, and off-road performance; working with the car's suspension to cushion impacts during driving and dampen resulting vibrations; preventing severe vibrations and premature damage to car components, adapting to the vehicle's high-speed performance, reducing driving noise, and ensuring driving safety, handling stability, comfort, and fuel economy.
Once my tire got punctured, and I felt the car start to vibrate. I immediately turned on the hazard lights and slowly pulled over to a safe spot. After stopping, I got out to check the puncture location and found a small nail had pierced through. Fortunately, I always keep tire repair tools in the car, so I spent about ten minutes using a tire plug for a temporary fix, ensuring the tire pressure didn’t drop too quickly. Afterward, I drove to a nearby repair shop for a professional inspection. The most important thing throughout the process is to stay calm and prioritize safety. I also recommend regularly checking if the spare tire is properly inflated and carrying a simple tire pressure gauge to monitor pressure periodically, avoiding similar issues. Handling such minor troubles properly on the road can reduce risks and save on towing fees.
While driving in the suburbs, I ran over a metal shard which punctured my tire, causing the car to suddenly veer to the left. I immediately slowed down and pulled over onto the grassy roadside. After ensuring the surroundings were safe, I put on gloves to inspect the tire and found it was slowly leaking but needed to be replaced with the spare. I proceeded to remove the damaged tire, used the jack to lift the car, and step-by-step installed the spare. The whole process was quite exhausting, but I’ve made it a habit to check my toolkit before trips to ensure I have a spare wrench and warning triangle. If the spare tire is underinflated, I’d top it up with some air before driving slowly to the repair shop. This experience taught me the importance of watching tutorial videos and practicing tire changes beforehand, so I can handle emergencies quickly if they arise.
If a tire is punctured, you must immediately pull over to a safe spot, engage the handbrake, and turn on the hazard lights. Exit the vehicle to check for rapid air leakage. If the leak is minor, use a tire repair kit for a temporary fix; if the leak is significant, replace it with the spare tire right away. Drive to a nearby repair shop to ensure safety. Regular tire maintenance can prevent such issues.
