···
Log in / Register

What to Do When a Car Makes Too Much Noise While Driving?

4 Answers
ArabellaDella
07/29/25 10:07am

Solutions for excessive noise while driving include: 1. Install a soundproofing pad under the hood to block engine noise from entering the cabin and provide insulation; 2. High tire pressure can increase noise—attach a piece of velvet cloth to the tire mudguard; 3. Add sealing strips to the door frames, place soundproofing material inside the doors, or apply soundproofing pads and vibration dampening boards to the trunk floor. Causes of excessive car noise include: 1. Engine noise; 2. Tire noise; 3. Wind noise; 4. Chassis noise, with engine noise further categorized into cold-start and hot-engine anomalies.

Was this review help?
13
4
Share
DiCamille
08/13/25 1:00pm

Driving with loud noise is really annoying. As an experienced driver with ten years behind the wheel, I can tell you that in most cases, this is caused by tire issues—either severe wear or insufficient tire pressure. Check the tread wear; if it's uneven, replace the tires or perform wheel balancing. Engine noises might indicate low oil levels or loose parts, so listen to the engine bay when the car is warm. Clunking sounds from the chassis often mean loose bolts, especially noticeable on bumpy roads, affecting driving comfort. Wind noise suggests aging window seals; replacing them improves sound insulation. Don’t underestimate noise—it can easily distract you and lead to accidents. Visit a professional shop early for diagnosis and repairs to drive with peace of mind. Regular maintenance of tires and the chassis can prevent most issues.

Was this review help?
10
5
Share
Expand All
EmmanuelFitz
10/07/25 3:06am

My new car has become noticeably noisier after just two years of driving. I've done some research. The most common cause is tire imbalance—check the tire pressure yourself; the standard values are posted on the door frame. A leaking exhaust system produces a gurgling sound, while an overheating engine makes a muffled noise. If there's a humming sound, especially at high speeds, it might be a driveshaft issue. If the noise is concentrated around the wheels, the bearings could be damaged—spin the wheels by hand and listen for any unusual sounds. Safety is important, so don't push it—take it to a reliable repair shop to diagnose the problem. During maintenance, clean the filters and inspect the suspension system to reduce similar issues, ensuring a quieter and more fuel-efficient ride.

Was this review help?
12
4
Share
Expand All
MaggieMarie
11/20/25 4:29am

With over a decade of car repair experience, common driving noises typically stem from tire wear, loose engine mounts, or drivetrain wear. For DIY checks, use a jack to lift the car and inspect the wheel hub bearings. Unusual sounds often originate from cracked exhaust pipes or aged suspension rubber components. Prompt diagnosis is crucial to prevent damage to other parts. For instance, prolonged bearing failure can wear down the wheel hub, resulting in higher repair costs. Regular oil and filter changes help prevent engine noises. Driving comfort and safety should always come first.

Was this review help?
11
3
Share
Expand All
More Forum Discussions

Handle Violations First or Renew the License First?

First, you must handle the violations before applying for license renewal. When renewing a driver's license, it is not allowed to have any outstanding violations or unpaid fines. All violations must be settled, and fines must be paid before the license can be renewed. If you have outstanding violations and need to renew your license, please first visit the traffic enforcement station of the local police branch to handle the violations, pay the fines at the bank, and then proceed to the relevant license renewal office to complete the renewal process. Documents required for license renewal: Bring two copies of your ID card, two recent 1-inch color passport photos without headwear, the original ID card, the original driver's license, and a medical examination certificate from a county-level or higher hospital (free medical examinations are also available at the vehicle management office). License renewal process: The driver submits the required documents to the vehicle management office where the driver's license was originally issued. The vehicle management office will process the renewal within one working day after verifying the documents.
16
5
Share

Are LED headlights brighter than xenon headlights?

LED headlights are brighter than xenon headlights. The functions of automotive LED lights are: 1. Activating turn signals to alert following vehicles and reduce rear-end collisions; 2. Improving road visibility to enhance driving safety; 3. Informing trailing vehicles about braking actions to prompt speed reduction; 4. Using hazard lights during emergency stops or poor visibility conditions to notify surrounding traffic. Maintenance methods for automotive LED lights include: 1. Regularly inspecting lamp covers to prevent moisture accumulation; 2. Periodically replacing bulbs; 3. Properly adjusting headlight height; 4. Using high-quality replacement bulbs; 5. Protecting lights from foreign object impacts.
1
5
Share

How much cheaper is 92 gasoline compared to 95 gasoline?

92-octane gasoline is cheaper than 95-octane gasoline, but only by a few cents. Here are more related details: 1. The difference between the two: The most obvious difference between these two types of gasoline is the ratio of n-heptane and isooctane. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. From this, it can be seen that 95-octane gasoline has a higher isooctane content and better anti-knock performance. 2. Avoid frequently switching between different octane ratings: Frequent switching of gasoline octane ratings by car owners can confuse the engine's ignition system. In practice, car owners should not frequently change gasoline octane ratings. If they choose 92 or 95, they should stick with it consistently. If they want to switch gasoline types, they should stick with the chosen type for a long time. Additionally, mixing gasoline types is highly discouraged, as it can confuse the engine.
17
2
Share

What does car idle speed mean?

The idle speed of a car refers to an operating condition where the engine runs without any load, meaning the car's gear is in neutral. Introduction to car idle speed: The engine speed during idle is called the idle speed. The idle speed can be adjusted by changing the throttle opening size and other methods. Idle speed means the engine is "running without doing work." When the engine is running, if the accelerator pedal is fully released, the engine is in idle condition. When adjusting the idle speed, the RPM should not fluctuate abruptly, as this may cause premature wear to the engine. It is best to have the adjustment performed at an automotive repair facility. Introduction to car idle condition: When the engine is running, if the accelerator pedal is fully released, the engine is in idle condition. When adjusting the idle speed, the RPM should not fluctuate abruptly, as this may cause premature wear to the engine. It is best to have the adjustment performed at an automotive repair facility. When starting the engine with the vehicle in a parked state, the minimum stable engine speed is called parking idle speed (the process of the engine transitioning from a cold idle state to an idle state at normal operating temperature is called warm-up or heating).
6
0
Share

What is the displacement of the 2018 Audi A6L 35TFSI?

2018 Audi A6L 35TFSI has a displacement of 2.0L, equipped with a 2.0T turbocharged engine, with a maximum horsepower of 224ps, maximum power of 165kw, maximum torque of 350nm, and matched with a 7-speed dual-clutch transmission. The 2018 Audi A6L 35TFSI is a mid-to-large-sized car with body dimensions of: length 5034mm, width 1874mm, height 1480mm, wheelbase 3012mm, front track 1627mm, rear track 1618mm, minimum ground clearance 115mm, and curb weight 1770kg.
10
4
Share

What is Continental tire?

Continental is a brand of tires, belonging to the German Continental Group. The functions of tires are: 1. To transmit driving force, braking force, and steering force to achieve vehicle operation; 2. To support vehicle loads; 3. To reduce and absorb vibrations and impacts during driving, avoiding severe vibrations that could damage vehicle components. The maintenance methods for tires are: 1. Regularly clean stones from tire treads; 2. Minimize exposure to direct sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Be mindful of driving habits, choose road surfaces carefully while driving, avoid objects that could puncture or scratch tires, and steer clear of chemical spills that could corrode tires.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.