What to Do When a Car Gets a Dent?

How Much Fuel Does a Car Consume at Idle?

For most vehicles with an engine displacement of 1.5-1.8 liters, the fuel consumption at idle is approximately 1-2 liters per hour. Factors affecting idle fuel consumption: Idle fuel consumption varies by vehicle model and is also related to engine displacement. If the air conditioning is on while idling, some cars will automatically assess the load and adjust the idle speed and fuel supply accordingly. This is also influenced by factors such as coolant temperature, air intake volume, and ambient temperature. Avoid prolonged idling: It is recommended that drivers turn off the engine rather than let it idle for extended periods while waiting. Prolonged idling not only increases fuel consumption but can also lead to incomplete combustion of gasoline, resulting in carbon buildup.

13

5

Share

Do I need to affix the inspection exemption label applied for on 12123?

You do not need to affix the inspection exemption label applied for on 12123. When using it, simply show it to the traffic police on your phone for scanning. Paper labels need to be affixed: The motor vehicle inspection compliance label, environmental protection label, and insurance label should be affixed to the upper right corner of the vehicle's front windshield. Failing to affix the relevant vehicle labels as required is illegal and may result in corresponding fines and penalty points. Electronic labels do not need to be affixed: However, under the new regulations, the environmental protection label has been abolished and merged with the annual inspection label. Additionally, some regions have also abolished the compulsory traffic insurance label, replacing it with electronic insurance policies. Therefore, in these regions, only the annual inspection compliance label needs to be affixed. However, this is currently limited to Beijing. If the trial goes smoothly, it will be implemented nationwide.

3

5

Share

How Many Degrees Do the Wheels Turn When the Steering Wheel is Turned 90 Degrees?

When the steering wheel is turned 90 degrees, the wheels turn approximately 5 degrees; when the steering wheel is turned one full circle, the wheels turn 26.7 degrees. Degrees of turning the steering wheel one full circle: One full circle is 360 degrees, a slight adjustment is 90 degrees, and turning the steering wheel to the full lock means turning it one and a half circles in the corresponding direction. Turning left to the full lock means turning left one and a half circles, and turning right to the full lock means turning right one and a half circles. Turning the steering wheel to the full lock is usually used for reversing or when encountering sudden situations that require a significant change in direction. The driver needs to have a certain understanding of the car's direction sense to better handle various situations. Calculation of steering wheel and tire degrees: Turning the car steering wheel from the center to one side to the full lock is one and a half circles, which is 540 degrees, corresponding to a wheel turn of 40 degrees. That is, for every 13.5 degrees the steering wheel is turned, the wheels turn only 1 degree.

16

1

Share

What Causes the Abnormal Noise in the Acceleration Drive System?

Acceleration drive system noise occurs due to an unbalanced drive shaft. The symptoms of an unbalanced drive shaft noise are a periodic sound heard while driving, which becomes louder as the speed increases. In severe cases, it can cause the car body to shake, and the steering wheel may feel numb when held. Main causes of the fault: The drive shaft is bent or dented, causing imbalance during operation, leading to wobbling and noise. Fault diagnosis: Lift the rear wheels of the car, start the engine, engage a high gear, and observe the vibration of the drive shaft. If the vibration is greatest when the speed decreases, it indicates that the vibration and noise are caused by drive shaft imbalance.

7

4

Share

Should the tire pressure be the same for front and rear wheels?

Tire pressure can vary between front and rear wheels, but the difference should not be too large. Both must remain within the standard range, and the difference between them should ideally not exceed 0.1 bar. It's difficult to maintain consistent tire pressure: In fact, not only can the tire pressure differ between front and rear wheels, but it's also challenging to ensure consistent pressure across all four tires of a car. It's important to note that the standard tire pressure is a range, not a fixed value, as it can be influenced by various objective factors. Standard tire pressure for cars: The standard tire pressure for a car varies depending on the model. The specific tire pressure should be based on the manufacturer's recommended values.

12

2

Share

What are the speed ranges for manual transmission gear shifts?

First, start in 1st gear. When the speed reaches 15 km/h, you can shift to 2nd gear; when the speed reaches 25 km/h, you can shift to 3rd gear; when the speed reaches 35 km/h, you can shift to 4th gear; when the speed reaches 45 km/h, you can shift to 5th gear. Gear shifting procedure: Press the clutch pedal—quickly release the accelerator—shift to the corresponding gear—match the accelerator accordingly based on the gear, or do not press the accelerator and quickly lift the clutch pedal to the semi-engagement state—once the clutch is engaged, gently release the clutch pedal. Shifting hand gesture: When shifting, keep your five fingers together, loosely but firmly grip the gear knob, and use your forearm to guide your hand in shifting. Note that the force should be gentle and slow during shifting, avoiding excessive force to prevent shifting into the wrong gear. Always pause in neutral when shifting. If you shift into the wrong gear, don’t panic—you can return to the original gear and shift again.

14

0

Share

What to Do When a Car Gets a Dent?

How Much Fuel Does a Car Consume at Idle?

Do I need to affix the inspection exemption label applied for on 12123?

How Many Degrees Do the Wheels Turn When the Steering Wheel is Turned 90 Degrees?

What Causes the Abnormal Noise in the Acceleration Drive System?

Should the tire pressure be the same for front and rear wheels?

What are the speed ranges for manual transmission gear shifts?

What is the fuel consumption of the uu125?

What Causes Engine Abnormal Noise?

What is the difference between run-flat snow tires and regular snow tires?

What causes abnormal noise at low speeds that disappears after acceleration?