What to Do When a Car Collides with an Electric Bike?

1 Answers
McJude
07/30/25 8:11am
After a car collides with an electric bike, the first step is to call the police, then determine liability, and finally assess damages and proceed with insurance claims. The specific process is as follows: 1. Call the police immediately: In such a situation, don't panic. If anyone is injured, call an ambulance and the police first. If the rider is uninjured or has minor injuries, you must still call the police and remember to protect your legal rights. 2. Determine liability: If the car is fully at fault, first check if the rider is injured. If the injuries are severe, call an ambulance first, then dial 122 to report the incident to the police. Next, contact your insurance company for damage assessment and claims processing.
Was this review help?
8
1
Share
More Forum Discussions

What are the effects of a broken stabilizer link?

The effects of a broken stabilizer link are as follows: 1. It causes inaccurate four-wheel alignment. 2. It leads to uneven tire tread patterns or tread depths on both sides. 3. It results in unequal tire pressure on both sides. 4. It causes the front shock absorbers to fail. The functions of the stabilizer link are as follows: 1. When the horizontal heights of the left and right wheels are different, the stabilizer link generates anti-roll resistance to prevent body roll by resisting the twisting of the link. 2. When the left and right wheels pass over the same road bumps or potholes, the stabilizer link does not function. However, if the left and right wheels pass over different road bumps or potholes, it causes the link to twist, generating anti-roll resistance to suppress body roll.
4
5
Share

How to Turn On the Air Conditioning in the Excelle?

The method to turn on the air conditioning in the Excelle is: 1. Press the AC switch to turn it on; 2. Adjust the appropriate temperature and air outlet mode; 3. According to the principle that hot air rises, direct the cold air upwards. The Excelle is a compact 4-door 5-seater sedan with body dimensions of: length 4609mm, width 1798mm, height 1486mm, and a wheelbase of 2640mm. The Excelle is equipped with a 1.3T turbocharged engine and a 6-speed automatic transmission, with a maximum power of 120 kW and a maximum torque of 230 Nm. Its drive system is front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
4
0
Share

What is the method for replacing the oil filter?

Car engine oil filter replacement method is as follows: 1. Use a car lift to support the chassis and raise the vehicle to an easily accessible position. Pay special attention to safety to prevent sudden vehicle descent; 2. Drain the engine oil. There is an engine oil drain port under the vehicle. Simply unscrew the drain port to allow the engine oil to flow out. Observe the color of the engine oil - normal engine oil should be translucent. If it appears black, it should be replaced immediately; 3. When the flow rate from the oil drain port slows down, you can unscrew the oil filter for secondary draining; 4. After all the engine oil has completely drained, replace the oil filter. Use a filter wrench to install the new filter, tighten it, then tighten the drain plug knob, and lower the vehicle.
12
0
Share

Is the motorcycle license D or E?

Motorcycle licenses can be either D or E. Here is some information about motorcycle licenses: 1. Difference: A D license allows you to drive three-wheeled motorcycles, two-wheeled motorcycles, and light motorcycles, including the vehicles permitted under an E license as well as ordinary three-wheeled motorcycles. An E license only permits driving two-wheeled motorcycles and light motorcycles. 2. Probationary sign: When driving a motor vehicle during the probationary period, a uniform probationary sign must be affixed or hung at the rear of the vehicle. 3. D, E, and F licenses: All belong to motorcycle licenses, representing ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles respectively.
11
0
Share

What causes the engine shaking and fault light to come on?

Engine shaking with the fault light illuminated can be caused by the following reasons: 1. Oxygen sensor malfunction - The oxygen sensor provides feedback to the engine about the air-fuel mixture. If it fails, it may lead to inaccurate fuel injection quantities, causing engine shaking. 2. Clogged catalytic converter - The catalytic converter is responsible for purifying exhaust gases. A clogged converter not only causes engine shaking but also results in noticeable power loss. Solution for engine shaking with fault light on: It is recommended to visit a repair shop to read the specific fault codes using diagnostic equipment, accurately identify the fault point, and have it repaired by professionals.
6
0
Share

How to Use Audi Cruise Control?

Audi cruise control is used as follows: 1. Pull the lever inward to enter the standby cruise state, and the cruise icon will be displayed on the instrument panel; 2. When the vehicle speed reaches the specified speed or above, press the cruise control button; 3. During cruise operation, pulling the lever upward increases the vehicle speed, while pulling it downward decreases the vehicle speed; 4. Pushing the lever outward temporarily exits the cruise function, and pulling it inward restores the cruise function. Taking the 2020 Audi A4L as an example, it is a mid-size car with body dimensions of 4858mm in length, 1847mm in width, 1439mm in height, and a wheelbase of 2908mm.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.