What to Do When a C1 Driver's License Loses All 12 Points?

2 Answers
ChristianLee
07/24/25 2:33am
After a C1 driver's license loses all 12 points, the driver must undergo road traffic safety regulations training and pass the subject one exam. Below are relevant details about point deductions: 1. License plate issues: Obstructing, soiling, or damaging a license plate violates motor vehicle license plate installation regulations. Using a fake license plate or driving without one will result in a 12-point deduction and a fine. 2. Drunk driving: The license will be temporarily suspended for six months, with a fine ranging from 1,000 to 2,000 yuan. 3. Overloading: If the number of passengers exceeds 20% of the vehicle's capacity, being caught by traffic police will lead to a 12-point deduction.
Was this review help?
20
3
Share
HarmonyLee
08/10/25 10:07pm
If your C1 driver's license has all 12 points deducted, as a seasoned driver with ten years of experience, I know this can be quite frustrating. The first step is to stop driving immediately because no points mean no valid license, and continuing to drive could result in fines or even detention. Then, promptly report to the local vehicle management office, where they will require you to attend a 7-day safety and traffic laws training course, with several hours of classes each day. After completing the course, you’ll need to take an exam, similar to the subject one test, and passing it is necessary to regain your license. This process might take one or two weeks, so stay patient but diligent. I suggest reflecting on why you lost the points—whether it was speeding or running red lights—and consider installing a navigation system to remind yourself not to violate rules again. Remember, safety comes first when driving. Points can be regained, but accidents can be devastating. Always pay attention to traffic rules and avoid complacency.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What grade of gasoline should be used for the BMW G310R?

BMW G310R should use 95-octane gasoline. The following is an introduction about gasoline: Reasons for using 95-octane gasoline: BMW recommends using 95-octane or higher gasoline, which ensures complete combustion, reduces carbon deposits, and provides quick acceleration response. 95-octane gasoline consists of 95% isooctane and 3% n-heptane. When the engine has a high compression ratio, high-octane gasoline should be used. Using low-octane gasoline in a high-compression engine can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. Differences between gasoline grades: Currently, the gasoline grades available on the market are 92, 95, and 98, corresponding to different octane ratings. The higher the octane rating, the better the gasoline's anti-knock performance. When the air-fuel mixture is injected into the engine cylinder, the piston moves upward, and the compressed mixture's temperature rises. If the anti-knock performance is insufficient, the mixture may start burning before the spark plug ignites due to temperature and pressure, causing knocking.
13
3
Share

What does a small turtle on the car dashboard mean?

A small turtle appearing on the car dashboard indicates that the vehicle has encountered a fault but it does not immediately affect driving. It is recommended to limit the speed to 10 km/h to safely reach a repair facility. Here is relevant information about car dashboards: 1. Overview: The car dashboard consists of various gauges, indicators, and especially warning lights and alarms for the driver, providing necessary operational parameter information. Depending on their working principles, they can be broadly categorized into three generations. The first generation of car dashboards used mechanical movements; the second generation is referred to as electrical dashboards; and the third generation comprises fully digital dashboards, which offer richer display content and simpler wiring connections. 2. Fault Diagnosis System: (1) Fault Detection: The input level signals to the microprocessor have a specific range under normal conditions. If signals outside this range are detected, the ECU diagnoses the signal system as abnormal. (2) Fault Classification: When the microcomputer operates normally, diagnostic programs detect abnormal input signals and classify them into minor faults that do not cause obstacles, faults that lead to functional degradation, and major faults. Faults are prioritized and pre-programmed. If the microcomputer itself fails, major faults are classified via the WDT (Watchdog Timer).
8
3
Share

What are the differences between the Challenger 300 and the Duke 600?

The differences between the Challenger 300 and the Duke 600 are as follows: 1. Different Frames: 1. Challenger 300: MERIDA patented HFS technology aluminum alloy frame (with frog legs). 2. Duke 600: MERIDA aluminum alloy frame. 2. Different Hubs: 1. Challenger 300: FORMULA quick-release aluminum alloy disc brake hub. 2. Duke 600: Novatec aluminum alloy front and rear disc brake hubs. 3. Different Front Forks: 1. Challenger 300: SRAM-Rockshox-XC28 hydraulic lockout front fork. 2. Duke 600: Suntour XCM hydraulic lockout front fork. 4. Different Front and Rear Derailleurs: 1. Challenger 300: Front derailleur SHIMANO-M430, rear derailleur SHIMANO-ALIVIO-RD-M430. 2. Duke 600: Front derailleur SHIMANO-M390, rear derailleur SHIMANO-M390.
4
4
Share

Why does the Audi A6's RPM drop when braking?

Throttle body has carbon deposits; cleaning the throttle body should resolve the issue. Throttle Body: It is a controllable valve that regulates the air entering the engine. After the air enters the intake manifold, it mixes with gasoline to form a combustible mixture. It connects to the air filter at the top and the engine block at the bottom, often referred to as the throat of the car engine. The throttle body is one of the most critical components in today's electronic fuel injection engine systems. The responsiveness of the car's acceleration is closely related to the cleanliness of the throttle body. Cleaning the throttle body can reduce fuel consumption and make the engine more agile and powerful. Precautions for cleaning the throttle body: The frequency of throttle body cleaning largely depends on driving habits and environmental conditions. If there are no symptoms such as unstable idling, engine shaking, significantly increased fuel consumption, or weak acceleration, cleaning is unnecessary. Cleaning should only be performed when these symptoms appear. After cleaning the throttle body, it is essential to use a diagnostic tool to perform data matching and reset the throttle opening angle. This is because the engine control unit (ECU) has memorized the opening angle with carbon deposits. If not reset, the engine may exhibit unstable idling and excessively high RPM.
15
5
Share

Why can't the New Passat's one-key start detect the key?

New Passat's one-key start not detecting the key may be due to a dead smart key battery, damaged smart box sensor, or signal interference. Below are detailed explanations of the possible causes: Dead smart key battery: If the smart key battery is dead, charge it for a while and then try starting the car again. Damaged smart box sensor: For a new car, this issue is unlikely but cannot be completely ruled out. If the smart box sensor is indeed damaged, you can file a complaint at the dealership and request the staff to replace it with a new smart box sensor. Signal interference: If there is interference, try to find a location where the signal can be received by moving around to a suitable spot.
13
1
Share

What causes the abnormal noise in Honda's 5AT transmission?

Honda's 5AT transmission abnormal noise may be caused by bearing damage or long-term failure to change the transmission oil. Below are the specific explanations for the causes: Abnormal noise may be due to bearing damage: When bearings wear out, their clearance increases and their fitting accuracy decreases; when bearings are damaged, as they cannot operate normally, abnormal sounds will be produced, and even the transmission components in the gearbox may be damaged, leading to an expansion of the fault. Long-term failure to change the transmission oil: If the automatic transmission oil is not changed for a long time, the oil will become thick and its fluidity will be insufficient, resulting in no protective layer between components and direct friction. This will exacerbate the wear of mechanical parts, leading to abnormal noise.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.