What to Do When 6 Points Are Deducted from the Driver's License?

1 Answers
VanChristian
07/29/25 4:55pm
Solutions for having 6 points deducted from the driver's license are as follows: 1. If there are still points remaining after 6 points are deducted: You can continue driving normally. However, the corresponding fine must be paid. If the fine is issued on the spot by traffic police or via a penalty decision notice, then simply pay the fine at the designated bank specified on the notice. Generally, payment should be made within 15 days of receiving the notice; otherwise, late fees may apply. 2. If no points remain after 6 points are deducted: You need to attend a study session at the vehicle management office and also take an exam. Only after passing the exam can you retrieve your driver's license. 3. If all points on the driver's license are deducted: If all points are deducted but you fail to attend the study session within the specified time, the driver's license will be revoked.
Was this review help?
2
1
Share
More Forum Discussions

What is the structure of a cylinder?

The structure of a cylinder consists of the cylinder barrel, end covers, piston, piston rod, and seals. The cylinder block is the main body of the engine, integrating all cylinders and the crankcase into one unit, serving as the supporting framework for installing pistons, crankshafts, and other components and accessories. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning the fuel in a sealed cylinder, causing the gas to expand and push the piston to perform work. The arrangement forms of cylinder blocks include: 1. L-type in-line: All cylinders are aligned at the same angle and arranged in a single plane, using only one cylinder head. 2. V-type arrangement: All cylinders are divided into two groups, with adjacent cylinders arranged at a certain angle to each other, forming two angled planes. 3. W-type arrangement: Composed of two small V shapes forming a large V shape, with two groups of V-type engines sharing a single crankshaft. 4. H-type arrangement: The angle between the cylinders is 180 degrees. 5. VR arrangement: Refers to an engine with a 15-degree angle between cylinders.
10
1
Share

Do You Need to Press the Clutch When Turning a Car?

You do not need to press the clutch when turning a car. Vehicle deceleration is achieved through the service brake. The clutch is located in the flywheel between the engine and the transmission, with the clutch assembly secured to the rear plane of the flywheel by screws, and its output shaft serves as the input shaft of the transmission. Here are some precautions when turning a car: 1. Reduce the speed when turning, and avoid steering too sharply to prevent excessive centrifugal force causing the car to skid. If the car skids, immediately release the accelerator pedal and turn the steering wheel toward the side of the skid. Once the car resumes straight driving, return the steering wheel to its original position and continue driving. 2. Avoid using the brake when turning, especially emergency braking, to prevent skidding or accidents. 3. When turning, adjust the steering wheel according to the curve and coordinate with the driving speed, ensuring appropriate steering angle, timing, and timely return of the steering wheel. Never take both hands off the steering wheel to prevent the car from veering off course and causing danger.
4
4
Share

How many days does it take to schedule a C1 subject one test?

C1 subject one test scheduling varies depending on the number of applicants, the queuing for scheduling acceptance, and the speed of successful acceptance. Generally, you will receive a text message within a week after online scheduling; those who have canceled their appointment and rescheduled or whose driving study certificate is about to expire will be prioritized, while first-time applicants will be scheduled more slowly. Permitted vehicle types for C1: The C1 driving license allows driving small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; small passenger vehicles with seating capacity of 9 or fewer. C1 driving license does not permit driving: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. Age requirements for C1: The minimum age requirement for a C1 driving license is 18 years old, with no upper age limit. However, applicants over 70 years old must pass tests for memory, judgment, and reaction abilities.
12
1
Share

What Are the Solutions for a Stuck Car Seat Belt?

The solutions for a stuck car seat belt are: 1. Slowly pull out the seat belt; 2. Seek professional repair; 3. Replace the seat belt. The function of the seat belt is: when the vehicle collides or emergency braking is applied, the pre-tensioning device will instantly retract, tightening the slack seat belt to firmly secure the occupant in the seat, preventing secondary collisions. The method for replacing the seat belt is: 1. Locate the wiring under the car seat and find the sensing wire for the seat belt buckle; 2. Remove the seat cushion, take out the airbag, find the bolt securing the seat belt, and remove the seat belt buckle; 3. Find the seat cushion sensor inside the seat cushion and remove it; 4. Install the new seat belt buckle onto the seat and insert the bolt; 5. Install the weight sensor on the car seat, then install the new retractor and tighten it with a wrench; 6. Restore the car seat cushion to its original position and arrange the wiring at the bottom of the seat properly.
13
4
Share

What does it mean when the Toyota 4LO fault light flashes?

Toyota 4LO fault light flashing refers to the low-speed four-wheel drive. When the 4LO indicator light on the vehicle dashboard flashes, it indicates a fault in the low-speed four-wheel drive system, requiring repair. If it is a vehicle speed sensor failure, you should promptly go to the car's 4S store or repair shop to inspect and repair the car's sensor. If the issue persists, it is recommended to conduct a comprehensive inspection of the car engine. Below are the solutions for when the Toyota 4LO fault light flashes: 1. Switch between high-speed four-wheel drive and low-speed four-wheel drive several times, and press the accelerator a few times during the switching process; 2. Disconnect the negative terminal of the battery for 5-10 minutes and try to use the vehicle's built-in repair system for repair; 3. Check the ABS sensor plugs on the front and rear wheels and firmly press the transfer case plug of the four-wheel drive; 4. Check whether the exhaust system and the three-way catalytic converter are blocked; 5. Perform a reset of the fault unit by short-circuiting the 4th and 12th terminals of the vehicle's OBD interface for 10 seconds, and clear the fault code at the same time; 6. Go to a repair shop or 4S store to use a decoder to read the specific fault code, and then inspect and repair according to the fault code read.
13
4
Share

Where is the maintenance switch for the Corolla Hybrid?

Corolla Hybrid maintenance switch is located at the lower left side of the steering wheel, near the headlight switch. Corolla Hybrid maintenance mode steps: Without pressing the brake, press the power button to start, depress the accelerator pedal twice firmly, press and hold the brake to shift into D gear and depress the accelerator pedal twice firmly again, then press and hold the brake to shift into P gear and depress the accelerator pedal twice firmly, finally press and hold the brake and press the power button to start the engine to successfully enter maintenance mode. Introduction to hybrid vehicles: HEV (Hybrid Electric Vehicle), also known as mild hybrid. Although hybrid models are hybrid vehicles, they are not new energy vehicles and do not enjoy national new energy subsidies or other policy benefits, and must be registered with blue license plates. The most important feature of HEVs is that they do not require charging, and their operation mode is no different from that of conventional fuel vehicles. The battery capacity and motor power in the vehicle are relatively small, only playing an auxiliary role to the engine, participating in driving only during startup, low-speed driving, or uphill sections, thereby reducing engine load to lower fuel consumption.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.