What to Do in Case of a Traffic Accident Without a Dash Cam?

2 Answers
RonanLynn
07/23/25 7:50pm
In the event of a traffic accident without a dash cam, you should immediately call the police. The traffic police will determine the liability for the accident, and compensation will be processed based on the liability assessment. After a traffic accident occurs, you should call the police as soon as possible. The traffic police will conduct an on-site investigation and produce a road traffic liability determination document. Generally, if two motor vehicles collide, the party that played a larger role in the accident will bear the primary liability. If a motor vehicle collides with a non-motor vehicle or pedestrian, the motor vehicle will bear the primary liability. Additional information about dash cams is as follows: 1. Introduction: A dash cam is a device that records images, sounds, and other related information during vehicle travel. After installing a dash cam, it can record the entire driving process, including video images and sounds, which can serve as evidence in traffic accidents. For those who enjoy self-driving tours, it can also be used to document the process of overcoming challenges. It continuously records while driving, capturing time, speed, and location in the footage, functioning much like a "black box." 2. Components: Different dash cam products may have varying appearances, but their basic components typically include a main unit, a speed sensor, and data analysis software.
Was this review help?
12
1
Share
LaArcher
08/10/25 5:57pm
If I get into an accident without a dashcam installed, I'll first make sure I'm not injured, immediately brake and stop in a safe location, then turn on the hazard lights to warn others. Check if anyone around needs first aid, and if so, call 120 for emergency help right away. Then report the accident location and situation to the traffic police by calling 122, and wait for them to arrive at the scene. Take out my phone and carefully photograph the scene, such as the position of the vehicles, damaged areas, road markings, and weather conditions—these are all important pieces of evidence. Look for witnesses, like passing pedestrians or drivers, and politely ask for their names and phone numbers for testimony. Exchange information with the other driver involved, including names, driver's license numbers, and insurance policy numbers, but avoid arguing about liability and remain calm. After handling the scene, contact my insurance company to provide photos, witness information, and other materials needed to support the claim. Although not having a dashcam is troublesome, collecting evidence on my own is still effective. Installing one later will save a lot of hassle.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What is the function of car front fog lights?

Here is an introduction to the functions of car front fog lights: 1. In foggy or rainy conditions where visibility is significantly affected by weather, they allow other vehicles to see your car. 2. Installed at the front of the car, slightly lower than the headlights, they are used to illuminate the road during rainy or foggy weather. 3. They can improve the visibility for the driver and other traffic participants, enabling oncoming vehicles and pedestrians to spot each other from a greater distance. Here are the operation methods for turning on the front and rear fog lights: 1. Lever-operated type: The fog lights are activated by rotating the switch on the lever. When the button marked with the fog light symbol is turned to the ON position, the front fog lights turn on. Then, turning the button downward to the rear fog light position activates both the front and rear fog lights simultaneously. 2. Button-operated type: For models where the front and rear fog lights are turned on via buttons, there are fog light buttons near the dashboard or center console. Pressing the front and rear fog light buttons respectively will illuminate the front and rear fog lights.
1
4
Share

What is the function of tire hairs?

The function of tire hairs is to test the quality of the tire rubber by pulling them. Below is relevant information about tire hairs: 1. If they can be stretched long and are difficult to break, it indicates good rubber quality. Otherwise, it suggests poor rubber quality or expired products. 2. Tire hairs are formed during the vulcanization process of tires, where liquid rubber flows into the vent holes of the tire mold and hardens. Related information: 1. Tire hairs mainly occur when the vehicle is driven at high speeds, causing the tires to rotate rapidly. 2. The air inside the tire treads is compressed and then released, creating continuous "compression-release" noise. 3. The faster the speed and the heavier the vehicle, the louder the noise. At high speeds, the effect of tire hairs is negligible, so they do not increase tire noise.
4
4
Share

What Causes the Inability to Add Refrigerant to a Car's Air Conditioning System?

Car air conditioning systems may fail to accept refrigerant primarily due to compressor malfunction or excessive internal pipeline pressure, preventing refrigerant injection. In such cases, it's necessary to visit a 4S dealership for diagnostics to pinpoint and repair the specific fault. Additional details regarding car AC refrigerant recharge are as follows: 1. Procedure for adding refrigerant: Begin with pressure testing, followed by pressure retention checks. Upon confirming no leaks and stable pressure, proceed with vacuum extraction before refrigerant charging. 2. Precautions during refrigerant charging: Always start the vehicle and activate the AC system before charging. Refrigerant should typically be introduced through the low-pressure port while ensuring the high-pressure gauge connection remains securely tightened.
16
3
Share

What is the difference between Giti Tire 221 and 228?

Giti Tire 221 and 228 differ in their specifications. Below is an introduction to the differences between Giti 221 and 228: 1. Giti 221 tire specifications: 195/60r15. 2. Giti 228 tire specifications: 225/60r16. Below is an introduction to the functions of tires: 1. Support the entire weight of the vehicle and bear the load of the car. 2. Transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface. 3. Reduce and absorb the vibrations and impact forces of the car during driving. Below is an introduction to tire maintenance methods: 1. Regularly clean the stones in the tire treads. 2. Reduce exposure of tires to direct sunlight. 3. Promptly check tire pressure. 4. Pay attention to suspension maintenance. 5. Regularly check front wheel alignment.
4
0
Share

What is the difference between full slicks and semi-slicks?

The differences between full slick tires and semi-slick tires: 1. Price difference: Full slick tires are more expensive than semi-slick tires, which is hard to accept for amateur racing enthusiasts, who mostly choose semi-slick tires. 2. Grip difference: Full slick tires have stronger stickiness than semi-slick tires, providing better grip. However, if there are many debris like gravel on the road, these particles sticking to the tires can negatively affect grip. Therefore, full slick tires are not suitable for general road driving. 3. Sidewall hardness difference: Semi-slick tires have softer sidewalls than full slick tires, resulting in slower response at high speeds and deformation during emergency braking. Full slick tires are ultra-high-performance tires designed specifically for track use, requiring extremely high surface conditions. Once they reach working temperature, their grip is astonishing, far superior to semi-slick tires.
3
1
Share

What brand is Optimum tires?

Optimum is a tire brand under the Hankook Tire umbrella, known globally as a premium tire manufacturer. Currently available in three models: one prioritizing fuel economy, another emphasizing quiet comfort, and a third focused on handling safety. These are original equipment tires for many vehicle models on the market. The Optimo series is Hankook's highest market-share tire line, renowned for its comfort, cost-effectiveness, balanced handling and energy efficiency. The main Optimo series models in the market are K415, H426, and K715. Tires are crucial automotive components that directly impact driving stability and safety. As the only part of a vehicle that contacts the road surface, tires are rubber products. Normally, tires should be replaced every four years of use, so we recommend changing them every four years. When purchasing new tires, always check the production date carefully as tires have expiration dates. The typical lifespan of automotive tires is 3-5 years or 50,000-80,000 kilometers. Since tires are primarily made of rubber, prolonged exposure to sunlight causes aging. Extended outdoor parking accelerates tire aging and reduces strength, with such tires generally lasting no more than three years.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.