What to Do in Case of a Traffic Accident While Driving?

What Causes Jerking During Acceleration in an Automatic Transmission?

The reasons for jerking during acceleration in an automatic transmission are: 1. Using the wrong fuel, excessive carbon buildup in the fuel injectors or intake manifold, or issues with the torque converter assembly; 2. Fuel pump failure: A clogged fuel filter can also reduce engine power. Prolonged insufficient oil can lead to reduced performance or, in severe cases, piston knocking; 3. Problems with the engine's intake system: A clogged or malfunctioning throttle body can restrict airflow, resulting in sluggish acceleration. The gears in an automatic transmission include: 1. R (Reverse) gear, which should only be engaged after the vehicle has come to a complete stop; 2. N (Neutral) gear, equivalent to the neutral gear in a manual transmission, allowing the vehicle to coast when engaged.

8

1

Share

How to Clean Car Stickers?

Car stickers can be cleaned using the following methods: 1. Use a hot towel or hair dryer to heat the sticker and then peel it off; 2. Use a soft paper cutter blade to scrape it off; 3. Use a specialized adhesive remover to eliminate it; 4. Apply essential balm, alcohol, or diesel on the sticker and wipe it off with a towel; 5. Use soapy water to wash it off. The functions of car stickers are: 1. Beautify the car body and highlight its outline; 2. Remind other vehicles to maintain a safe distance to prevent accidents; 3. Protect the paint from natural erosion and avoid scratches; 4. Cover scratches; 5. Reflect light to attract other drivers' attention and improve driving safety.

7

3

Share

Does the Toyota Vellfire have an independent suspension?

Toyota Vellfire has an independent suspension, where the wheels on each side are individually suspended under the frame or body through an elastic suspension system. Taking the 2020 Toyota Vellfire Hybrid as an example, its body dimensions are: length 4975mm, width 1850mm, height 1945mm, wheelbase 3000mm, minimum ground clearance 170mm, and fuel tank capacity 58l. The 2020 Toyota Vellfire Hybrid is equipped with a 2.5l naturally aspirated engine, with a maximum power of 86kw and a maximum torque of 198nm, paired with an ECVT continuously variable transmission.

14

4

Share

What is the displacement of the Audi Q8?

The displacement of the Audi Q8 is 2.0t and 3.0t. Displacement is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Taking the 2021 Audi Q8 as an example, its body dimensions are: length 4986mm, width 1995mm, height 1693mm, wheelbase 2998mm, and minimum ground clearance 218mm. The 2021 Audi Q8 is equipped with a 2.0t turbocharged engine, with a maximum power of 180kw and a maximum torque of 370nm, paired with an 8-speed automatic transmission.

2

Share

How to Remove the Seat Belt Buckle?

The method to remove the seat belt buckle is: it needs to be taken to a 4S shop for removal. The seat belt is a device in the car designed to ensure that passengers and the driver are protected and reduce injuries when the vehicle is subjected to a violent impact, providing a fixed cushioning effect. The method of using the seat belt is: 1. Pull out the seat belt and fasten the buckle to ensure the belt secures the body; 2. Adjust the position of the waist belt so that it sits on the hips; 3. Adjust the position of the shoulder belt so that it crosses diagonally over the collarbone; 4. Before driving, check if the seat belt is secure to ensure its normal performance; 5. Hold the buckle and press the release button to retract the seat belt into the retractor, then place the buckle in the storage position.

19

0

Share

How Long After Painting Can You Polish?

Polishing can be done 3 to 7 days after painting. Washing the car is possible 24 hours after painting. Generally, under standard painting processes, the paint surface can be touched after 2 hours, and by 24 hours, the paint hardness reaches about 80%, making it safe to wash the car. The polishing method involves: 1. Washing the entire vehicle with a high-degreasing paint cleaner, avoiding the creation of new scratches by abrasive particles during cleaning; 2. For paint surfaces with defects like coarse particles, fine sandpaper marks, or flow marks, gently sand them flat using water sandpaper wrapped around a small rubber block before polishing; 3. Using a mechanical grinder (electric or pneumatic) with coarse polishing compound to rough grind the sandpaper marks, followed by mechanical polishing.

18

4

Share

What to Do in Case of a Traffic Accident While Driving?

What Causes Jerking During Acceleration in an Automatic Transmission?

How to Clean Car Stickers?

Does the Toyota Vellfire have an independent suspension?

What is the displacement of the Audi Q8?

How to Remove the Seat Belt Buckle?

How Long After Painting Can You Polish?

Does the Lavida have an engine guard?

What car brand has a V-shaped logo?

How to Replace the Turn Signal Light on X-Trail?

What to Do When Your Car is Damaged by Hail?