What to Do in Case of a MoJie Collision?

2 Answers
EmiliaLee
07/24/25 9:06am
Report any damage to the MoJie Travel User Service Center promptly. In the event of an accident, the MoJie Travel User Service Center will guide users to contact the insurance company. Users should assist the insurance company in handling the accident at the scene.
Was this review help?
11
2
Share
ConnorFitz
08/11/25 4:33am
In the event of a collision, I will immediately stop the car, turn off the engine, activate the hazard lights, and set up a warning triangle to ensure the safety of myself and others. Check for any injuries, and if someone is injured, call 120 for help immediately. Do not rush to exit the vehicle or move it to avoid causing a secondary accident. At the same time, calm the emotions of other involved parties to prevent disputes from escalating. If the vehicle can still be driven, move it to the side of the road to avoid obstructing traffic. Then, note down the time and location of the accident, the other party's license plate information, and take photos to document the damage details, including the scratched areas and the surrounding environment. Call the police at 110 or 122 to have traffic officers arrive and handle the situation, and truthfully explain the circumstances. Stay calm throughout the entire process—safety is always the top priority. After the accident, promptly inspect and adjust your driving habits to ensure safer driving in the future.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What Lights Should You Use in Foggy Weather?

Introduction to using car lights in foggy weather: 1. When driving in fog, you should turn on both front and rear fog lights. If the fog is extremely heavy, you can also turn on the hazard lights. The main purpose of turning on fog lights and hazard lights is to alert other drivers and avoid rear-end collisions or side-swipe accidents. 2. If your vehicle doesn't have fog lights, turn on the width marker lights and hazard lights to attract other drivers' attention. 3. Do not use high beams in foggy conditions. High beams will create a blinding white wall ahead, making visibility even worse. Therefore, it's recommended that drivers use high beams only as signal lights to alert oncoming vehicles, but the flashing duration should be extremely brief to avoid impairing other drivers' vision and causing accidents.
12
5
Share

ETC Electronic Tag Failure?

ETC displaying 'tag failure' indicates that the ETC electronic tag is not activated. You need to bring the ETC device to an ETC service center or ETC service outlet for inspection. If the failure is not caused by human factors, a simple secondary activation of the ETC will restore its functionality. How ETC Works: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations, ETC utilizes computer networking technology to process background settlements with banks. This enables vehicles to pass through highway or bridge toll stations without stopping to pay fees. Where to Install ETC: For small vehicles such as cars and minivans, the ETC card and OBU device should be installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is in the lower middle part.
12
5
Share

How to Judge the Distance Between Cars When Driving?

A following distance of about 2 meters is generally appropriate. Being too close can easily lead to rear-end collisions, while being too far may allow other vehicles to cut in. Normally, drivers can judge the distance by observing the position of the rear bumper and tires of the preceding vehicle from the outline of their own car's front: How to judge the distance between cars on the left, right, front, and rear To determine the position of the left wheel, we need to know where the left wheel will pass to avoid running over solid lines or obstacles like potholes and rocks on the road. When our line of sight aligns the protruding node of the left wiper with an object on the ground, the left wheel will pass over that object. For example, in the following illustration, if the wiper node aligns with the centerline on the ground, the tire will run over the centerline.
6
2
Share

What does 3T on tires mean?

The 3T marking on tires refers to the Treadwear Index, Traction Index, and Temperature Index. The Treadwear Index indicates the tire's wear resistance—the higher the number, the more wear-resistant the tire is, but the harder the rubber becomes, resulting in reduced comfort. Conversely, a lower number means less wear resistance, softer rubber, and better comfort. Below are the specific details of the 3T indicators: 1. TREADWEAR (Wear Resistance Index). The higher the number following this, the more wear-resistant the tire is. For typical family sedans, the number is usually above 300, indicating relatively high wear resistance. Performance tires with superior grip, however, often have numbers below 200. 2. TRACTION (Traction Ability). The Traction Index measures the tire's grip performance on wet surfaces, categorized into four grades: AA, A, B, and C. 3. TEMPERATURE (Temperature Index). The Temperature Index grade reflects the tire's heat dissipation capability.
13
1
Share

Which is More Fuel-Efficient: Naturally Aspirated or Turbocharged?

Naturally aspirated engines are generally more fuel-efficient than turbocharged engines. Typically, the fuel consumption of a 1.8T turbocharged engine is equivalent to that of a naturally aspirated 2.0-2.4L model. The main reason is that turbocharging only increases pressure within the same cylinder volume to achieve better power and torque performance. With increased air pressure, gasoline consumption cannot be too low. Additional information: 1. A turbocharged engine refers to an engine equipped with a turbocharger. 2. A turbocharger is essentially an air compressor that increases intake air volume by compressing air. It utilizes the inertial force of exhaust gases from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller then compresses the air delivered from the air filter pipe, pressurizing it before it enters the cylinder.
3
4
Share

How to Turn On Bluetooth in Mercedes-Benz E260?

Method to turn on Bluetooth in Mercedes-Benz E260: Open the phone settings, enable Bluetooth, then turn on the Bluetooth device's Bluetooth switch. Search for Bluetooth devices on the phone, select and pair the device once found. After successful pairing between the car's Bluetooth and the phone's Bluetooth, you can make and receive calls via the car's Bluetooth. The Mercedes-Benz E260 is a model under the Mercedes-Benz brand, with body dimensions of 5021mm in length, 1854mm in width, and 1487mm in height, and a wheelbase of 3014mm. In terms of appearance, the Mercedes-Benz E260 continues the front-face design of the current E-Class Elegance model, featuring the iconic Mercedes-Benz elements such as the tall upright emblem and the multi-slat grille. The new-style multi-slat grille, with more rounded curves, makes the front face appear less monotonous overall, retaining the necessary business demeanor while adding a touch of fashion.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.