What to Do in a Car Accident with Only Compulsory Traffic Insurance?

How to Turn Off Car Lights?

Methods to turn off car lights: Simply rotate the light control knob to the OFF position. Some models use an O position for turning off; some models have a button that needs to be pressed to turn off; and some models have the control on the light stalk, requiring you to rotate the stalk to turn off the lights. The stalk-type light switch generally consists of two sections: turning the red section controls the parking lights and low beams, while turning the blue section controls the fog lights. Note that the rotation direction may vary slightly depending on the car model. Adjusting the beam direction is important because prolonged vehicle use can cause the beam direction to shift due to vibrations, which can affect safety.

3

5

Share

What causes steering wheel vibration at high speeds?

The reason for steering wheel vibration at high speeds is: issues with the dynamic balance of the car tires or looseness, aging, or deformation in the car's steering, suspension, and transmission mechanisms. Steering wheel vibration is a common issue during daily driving, and it, along with body resonance, can make driving unsafe. A car wheel is an assembly consisting of a tire and a rim. However, due to manufacturing factors, the mass distribution of this assembly is not uniform, leading to dynamic imbalance when the wheel rotates at high speeds. This causes the driver to experience noticeable steering wheel vibration.

5

3

Share

Why does the car keep stalling while driving?

The reasons why the car keeps stalling while driving are: 1. Use of low-quality fuel; 2. Damaged fuel pump; 3. Insufficient driving skills; 4. Faulty spark plugs or ignition coils. Solutions: 1. If the car stalls at idle, simply restart the engine; 2. If the car stalls while coasting, automatic transmission models need to shift into neutral before restarting the engine. When turning off the engine, it is advisable to delay the shutdown, which is beneficial for the engine. After achieving the purpose, do not turn off the engine and remove the key immediately. The recommended delay time is about 30 seconds. Engines with turbochargers require delayed shutdown. After parking, allow sufficient time for the engine and turbocharger to cool and lubricate before shutting down, which can protect the engine and help cool the engine and water temperature.

9

1

Share

What Causes Low Car Antifreeze?

Low car antifreeze is caused by leakage. Damage to the radiator gasket, loose connections at the overflow tank, water pump mating surfaces, or any pipe fittings in the cooling system can lead to antifreeze leakage. It is necessary to promptly visit the nearest auto repair shop for maintenance; otherwise, the radiator will quickly run low on antifreeze. If the antifreeze level is insufficient (below the MIN mark), it will not provide adequate cooling, which can easily lead to "boiling over" during high-speed operation. The full name of antifreeze is antifreeze coolant, meaning it is a coolant with antifreeze properties. It prevents the coolant from freezing and expanding in cold winter conditions, which could crack the radiator or damage the engine cylinder block or head.

5

0

Share

How to Repair Car Scratches?

The methods to repair car scratches are: 1. For very shallow scratches, you can use car wax for repair. Wipe in a straight line. After the scratch disappears, use a finer compound to wipe and then apply wax. Choose high-quality wax when waxing; 2. Squeeze a small amount of toothpaste onto the scratch and then wipe it slowly. Toothpaste contains very fine particles that can polish away the scratch through wiping; 3. Use a touch-up pen that matches the color of the car's paint. Shake well before use, then gently dab it onto the scratch; 4. Prepare a piece of sandpaper, first clean the scratched area thoroughly, dry it, then wet the sandpaper and sand the scratch until it is smooth. Be careful with the pressure when sanding and avoid sanding for too long.

3

1

Share

What Does an Automobile Assembly Include?

An automobile assembly includes a number of parts, components, sub-assemblies, or accessories. The five major assemblies of a car are: 1. Engine assembly: A device that converts chemical energy into mechanical energy; 2. Steering gear assembly: A part used for the steering function of a car, ensuring driving safety; 3. Transmission assembly: A mechanism used to change the speed and torque from the engine, which can fix or change the transmission ratio between the output shaft and the input shaft in steps. The transmission consists of a transmission mechanism and a control mechanism; 4. Front and rear axles: Refers to the part of the front and rear wheel axles, including shock absorber springs, steering gear, balance shaft, drive shaft, and transmission gears, etc.; 5. Frame: The base of the car, composed of longitudinal beams and cross beams, supported on the wheels via suspension devices, front axle, and rear axle.

5

4

Share

What to Do in a Car Accident with Only Compulsory Traffic Insurance?

How to Turn Off Car Lights?

What causes steering wheel vibration at high speeds?

Why does the car keep stalling while driving?

What Causes Low Car Antifreeze?

How to Repair Car Scratches?

What Does an Automobile Assembly Include?

Differences Between Station Wagons and Sedan SUVs?

Where are Tesla cars produced?

How to Install Car Rear Seat Cushions?

What are the mirrors on both sides of the car called?