What to Do If Your Driver's License Has Expired Without Renewal?

1 Answers
EvelynLynn
07/29/25 3:31pm
First, if it has expired within one year, you can renew it normally; Second, if it has expired between one to three years, you need to retake the written test (Subject 1); Third, if it has expired for more than three years, the driver's license becomes invalid and renewal is prohibited. Penalties for Driving with an Expired License: You are not allowed to drive a motor vehicle during the expiration period, otherwise you may be treated as driving without a license. If your driver's license has been expired for less than one year, you can renew it at any time, but if you drive on the road, you may face a fine of 200 yuan. If your driver's license has been expired for more than one year without renewal, the traffic authorities will cancel it according to the law. If the expiration period is less than three years, the driver must retake and pass the written test (Subject 1) to restore driving eligibility. During this period, driving on the road may result in a fine ranging from 200 to 2000 yuan. If your driver's license has been expired for more than three years, it will be completely canceled. If you want to drive again, you must retake the driver's license test. Otherwise, driving on the road will be treated as driving without a license, resulting in a fine of 2000 yuan and administrative detention of up to 15 days.
Was this review help?
20
1
Share
More Forum Discussions

What is the method for jump-starting a car battery?

First, locate the batteries of both vehicles and ensure the rescue vehicle is turned off. Connect the positive terminals of both vehicle batteries with jumper cables. After connecting, attach one end to the negative terminal of the rescue vehicle's battery and the other end to the engine block of the vehicle being rescued. After confirming the jumper cables are properly connected, start the rescue vehicle first, then start the vehicle being rescued. Once the rescued vehicle starts successfully, the jumper cables can be removed.
13
0
Share

How to Repair a Fender Dent?

After disassembly, use a specialized hook to pry out the dent, then tap it back into place with a rubber mallet, using light to check for levelness. However, edges and reinforced areas cannot be treated this way. Alternatively, use a machine to suction out the dented portion, then tap it back with a rubber mallet. This method can also effectively repair reinforced areas.
13
0
Share

How to Replace the Battery in a BAIC Weiwang M50F Key

Press and hold the black button on the widest part of the key, then apply downward force to remove the bright silver decorative cover. Use a small flathead screwdriver or your fingernail to apply downward force and remove the bright silver decorative covers on both sides of the key. Insert an appropriately sized flathead screwdriver into the recessed hole near the metal keyring attachment point, then apply lateral force to pry open the key cover. Once opened, you'll see the key battery - simply replace the old battery.
15
1
Share

How to Auto-Fold the Rearview Mirrors on BMW X2?

On the BMW X2's central control, select "Vehicle" and press the left button on the MMI. After entering this interface, choose "Vehicle Settings". Then select "Central Locking", check the "Fold Mirrors" option, and the rearview mirrors will automatically fold when you lock the car.
1
3
Share

How to Use ETC for the First Time?

Newly installed ETC cannot be used immediately; the ETC device must be successfully activated before normal use. ETC Activation Method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If inserting and removing twice without the electronic tag attached shows "Tag Invalid," this is normal and does not affect activation. Alternatively, you can press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth, open the corresponding mobile app (usually a download QR code is provided on the electronic tag), and enter the device activation interface. Click "Device Connection" and wait patiently for the "Connection Successful" prompt. After successful connection, upload a photo of the vehicle's front to complete activation.
13
0
Share

How to Restore Headlights After Misadjustment?

At night, drive the vehicle to a distance of about 8 meters from a wall and turn on the headlights. Use an opaque thick cloth to cover the left headlight, and observe the height of the right headlight compared to the height specified in the vehicle's manual. Check if both headlights are in the normal state, and use chalk to mark the center of the light beam. Observe the center marks of the light beams from both headlights to see if the right one is 10cm higher than the left one. If not, fine-tune the lights on both sides.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.