What to Do If Your Driver's License Has Been Expired for One Year?

1 Answers
StMia
07/29/25 6:20pm
If your driver's license has been expired for one year, the following measures should be taken: 1. Driving is prohibited once your driver's license exceeds its validity period. If you fail to renew your license for more than one year, the traffic management department will revoke your driver's license. 2. For those whose license has been expired for more than two years, passing the subject one exam can restore the normal use of the driver's license. 3. If your license has been revoked for more than two years, you will need to reapply for a new one. Documents required for renewing an expired driver's license: 1. A physical condition certificate issued by a medical institution at or above the county level or a military regiment-level hospital. 2. Original and photocopy of your ID card. 3. Original driver's license. 4. Driver's license application form. 5. Recent 1-inch color photo with a white background and no hat.
Was this review help?
7
0
Share
More Forum Discussions

What does it mean when the EDC light is on in an Iveco?

When the EDC light is on in an Iveco, it indicates a fault in the electronic diesel control system. Components of the diesel engine electronic control injection system: The diesel engine electronic control injection system consists of three parts: sensors, ECU (control unit), and actuators. Introduction to vehicle warning lights: The engine indicator light shows the working status of the engine. If the oil warning light stays on while driving, it means the oil level is below the standard value. The tire pressure warning light displays the tire pressure condition; if the warning light is on, it indicates insufficient tire pressure or damage. The brake indicator light automatically turns on when the handbrake is engaged and turns off when the handbrake is released. The airbag indicator light shows the working status of the airbags, usually performing a self-check when the car starts, with the light turning off after a few seconds.
14
5
Share

What is the method to reset the maintenance light on the 2020 Haval F7?

Haval H7 maintenance light reset is completed through button operations. Specific steps: With the engine turned off, press and hold the trip meter reset button. Turn the ignition switch to the ON position. When the 'SERVICE' indicator appears on the display, pull out the minute button on the clock and turn it to the right. The odometer reading will then appear on the display. Subsequently, turn off the engine, then turn the ignition switch to the ON position again to complete the maintenance light reset. Maintenance Light: The maintenance light is a reminder function set by the manufacturer to alert the owner to perform scheduled maintenance at certain mileage intervals or time periods. It appears in the form of an instrument panel or screen message or indicator light to remind the owner to service the vehicle.
13
3
Share

What kind of fuel does the Lynk & Co 06 use?

Lynk & Co 06 uses 95-octane gasoline. 95-octane gasoline consists of 95% isooctane and 3% n-heptane. When the engine has a high compression ratio, high-octane gasoline should be used. If low-octane gasoline is used with a high compression ratio, it can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving performance. Lynk & Co 06 powertrain configuration: The Lynk & Co 06 is equipped with a 3-cylinder turbocharged engine. This engine delivers a maximum power of 130kW and a peak torque of 255N·m, with a fuel consumption of 6.6L per 100km. It is paired with a 7-speed wet dual-clutch transmission, offering advantages of high power, low fuel consumption, and low noise. Fueling precautions: Refer to the vehicle's manual to select the appropriate gasoline grade. Using gasoline with a lower octane rating than specified can cause engine knocking. Additionally, blindly using gasoline with a higher octane rating than required can also cause issues. High-octane gasoline burns more slowly, and if used in an engine with a low compression ratio, it can lead to delayed ignition, prolonged combustion time, and incomplete conversion of energy into power, resulting in sluggish acceleration while driving.
1
4
Share

Why does the pressure drop from the turbocharger to the throttle in the Passat Lingyu?

Possible causes and solutions for pressure drop from the turbocharger to the throttle in the Passat Lingyu are as follows: Possible causes: Intake system leaks or blockages can lead to this issue. The stepper motor in the idle control section, dirty throttle valve body, or air leaks. Abnormalities in sensors such as atmospheric pressure, temperature, throttle position, etc., leading to incorrect data. Blockages or obstructions can cause this. Abnormal electric fuel pump or fuel filter blockages due to various reasons, leading to restricted fuel delivery. Quality faults in the fuel injectors themselves, or blockages caused by foreign objects, poor sealing, aging rubber rings, etc., can all contribute to the problem. Solutions: If it's a new car, there shouldn't be issues with idle control components, as turbocharged direct-injection vehicles have high combustion requirements. The first step should be to clean the fuel system.
17
2
Share

Why does the Cruze steering wheel warning light come on?

In the Cruze, the steering wheel warning light is actually the power steering system warning light. When it illuminates, it indicates a fault in the power steering system. Reasons for the steering wheel warning light coming on: The power steering system contains a large amount of air, causing abnormal steering; foreign objects in the steering hydraulic line cause the steering pump flow control valve to stick. Detailed explanation of the steering wheel warning light: When the yellow light comes on, it means the steering system is partially malfunctioning, and turning the steering wheel will require more force; if the red light comes on, it means the steering system has completely failed, and the power assist system will not provide any assistance.
2
1
Share

How to adjust the ambient lighting in the Volkswagen 2021 Bora?

The ambient lighting in the Volkswagen 2021 Bora cannot be adjusted. Below are the specific reasons why the ambient lighting in the Volkswagen 2021 Bora cannot be adjusted and the functions of the ambient lighting: Specific reasons why the ambient lighting in the Volkswagen 2021 Bora cannot be adjusted: Because the vehicle is equipped with a single-color ambient light, the single-color ambient light can only illuminate in a fixed color and cannot be changed through adjustment. The ambient light can only be turned on when the vehicle's parking lights are activated, effectively enhancing the interior's sense of luxury. Functions of the ambient lighting: Ambient lighting is typically located in areas such as the steering wheel, center console, footwell, cup holder, roof, welcome lights, welcome pedals, doors, trunk, and headlights of the car. The lighting effects create a warm and comfortable atmosphere reminiscent of home, while also conveying a sense of technology and luxury.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.