···
Log in / Register

What to Do If Your Car Tire Is Deflated?

3 Answers
LeCaroline
09/08/25 4:45am
Locate the tire's valve. It protrudes from the wheel hub as a short tube with a small cap covering the inflation hole, which prevents dirt and dust from entering the valve. Turn the small cap counterclockwise to remove it. This will expose the inflation hole. Be careful not to lose the cap; it's best to keep it in your pocket. Test the tire pressure by screwing the pressure gauge onto the tire's valve. The gauge will then display the tire's pressure reading. Finally, refer to the recommended tire pressure to determine the normal value.
Was this review help?
16
3
Share
LeElliot
09/20/25 3:25am
I immediately pulled over to a safe spot when I found my tire was deflated, turning on the hazard lights to prevent rear-end collisions. I took out the portable air pump from the trunk, connected it to the cigarette lighter, and inflated the flat tire until the pressure gauge read around 2.5 bar. If you don't have the tools, contact your insurance company for free roadside assistance—never drive on a flat tire! Last time, my neighbor damaged the wheel rim and had to pay 800 RMB for repairs. I always keep a tire pressure monitor for real-time alerts and park in areas covered by surveillance to deter vandalism.
Was this review help?
2
1
Share
Expand All
OGrant
11/03/25 3:48am
A sudden flat tire is really dangerous. The first thing I did was turn on the hazard lights and slowly drive to the roadside, then placed a warning triangle 50 meters behind the car. I checked if it was maliciously punctured, and after confirming it was just deflated, I used the onboard air pump for emergency inflation. I inflated it to the manufacturer's recommended tire pressure and drove slowly to a repair shop for a full inspection. Remember to check the valve and wheel rim sealing—I've suffered from air leaks before. I recommend buying a solar-powered wireless air pump to keep in the trunk; even if the tire is deflated at night, you can handle it yourself, since rescue vehicles can sometimes take half an hour to arrive.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

How to adjust the rearview mirror of Wuling Hongguang S?

Wuling Hongguang S rearview mirror adjustment method: The adjustment knob for the rearview mirror can be seen on the door. Turning the knob to the 0 position turns off the rearview mirror adjustment; turning it to the L position adjusts the left rearview mirror; turning it to the R position adjusts the right rearview mirror. Move the knob up, down, left, or right to adjust the rearview mirror's angle accordingly. The Wuling Hongguang S has a body length, width, and height of 4390mm, 1660mm, and 1750mm respectively, with a wheelbase of 2720mm. The vehicle is front-engine, rear-wheel drive, and its engine has a maximum power of 56kw and a maximum torque of 110nm.
8
4
Share

How to Check the Correct Side of a Tire?

Identifying the correct side of a tire can be categorized into three scenarios: tires are generally divided into three types: unidirectional tires, symmetric tires, and asymmetric tires. 1. Identifying the correct side of a unidirectional tire: An arrow mark can be seen on the sidewall of the tire. During installation, the arrow should face forward. It is optimal to install the side with the production date facing outward. The arrow indicates the direction of wheel rotation, so the tire should be installed accordingly. 2. Identifying the correct side of a symmetric tire: The tread pattern is symmetric on both sides relative to the center of the tire, so there is no distinction during installation. Symmetric tires do not have a specific inside or outside, front or back. Generally, the side with the production date is installed facing outward. 3. Identifying the correct side of an asymmetric tire: The tread pattern is asymmetric on both sides relative to the center of the tire. One side of the tire will be marked with the word "outside," which should face outward during installation.
11
4
Share

Is the new Sagitar equipped with a dry or wet dual-clutch transmission?

The new Sagitar is equipped with a dry dual-clutch transmission. In terms of power, the Sagitar is powered by an EA211 1.2T engine paired with a DQ200 7-speed dual-clutch transmission. This engine delivers a maximum power of 116 kW and a maximum torque of 200 Nm, showing slight improvements in power parameters compared to the previous model. The 7-speed dual-clutch transmission in the new Sagitar provides smooth shifting overall. When rapid acceleration is needed, the transmission effectively understands the driver's intention and downshifts to the target gear. The Sagitar measures 4753 mm in length, 1800 mm in width, and 1462 mm in height, with a wheelbase of 2731 mm.
13
4
Share

What Causes Slight Fluctuation in the Idle Speed Needle?

Reasons for slight fluctuation in the idle speed needle: 1. Idle switch not closing; 2. Faulty idle control valve; 3. Air intake pipe leakage; 4. Fuel injector dripping or clogging; 5. Exhaust system blockage; 6. ECU malfunction; 7. Air filter clogging; 8. Poor cylinder compression. Solutions include: 1. Adjust, repair, or replace the throttle position sensor; 2. Clean or replace the idle control valve and use a dedicated decoder to set the basic idle speed; 3. Locate the leakage point, reseal or replace the component; 4. Clean the fuel injectors, check the fuel injection volume of each injector, and ensure there is no clogging or dripping; 5. Replace the three-way catalytic converter.
13
3
Share

How to Use the Car AUX?

The method of using the car AUX: 1. Prepare a 3.5mm male-to-male audio cable, insert one end of the AUX cable into your phone or MP3 player, and the other end into the BMW AUX interface; 2. Confirm the audio input mode, find the multimedia option in the car menu, and set it to AUX audio input; 3. Start playing music on your phone or MP3 player, and adjust the AUX volume to a suitable level. AUX is an audio input interface that can output audio from electronic audio devices including MP3 players, allowing you to listen to music from these devices through the car's speakers. The letters 'AUX' will be marked around the interface.
19
0
Share

How to adjust the auto-locking function of Geely New Vision?

Adjustment method for the auto-locking function of Geely New Vision: First, shift to the P position, then turn the key to the ON position, close the doors, and press the lock button for 6 seconds until the hazard warning lights on the dashboard flash twice. The auto-locking function of Geely Vision will automatically lock when the speed reaches a set value or if the unlock button is pressed for 10 seconds without opening the door. The dimensions of the Geely New Vision are 4599mm in length, 1747mm in width, and 1482mm in height, with a wheelbase of 2615mm. The car is front-wheel drive and is equipped with an engine that delivers a maximum power of 80kW and a maximum torque of 142Nm.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.