What to Do If Your Car Runs Out of Fuel on the Road?

1 Answers
Rylee
07/29/25 7:50pm
Solutions if your car runs out of fuel on the road: 1. Pull over to the side of the road—never leave your car in the middle of the road, as it can obstruct other vehicles and is extremely dangerous; 2. Check your car's trunk to see if there is any spare gasoline stored inside. If there is, you can use it to refuel your car; 3. Push the car to a gas station; 4. Buy some fuel from a nearby gas station or passing vehicles—try to stop a large truck, as many small cars' fuel tanks cannot be siphoned; 5. Add some water to the fuel tank—this can help the car run for a short distance; 6. Call for emergency roadside assistance services.
Was this review help?
5
2
Share
More Forum Discussions

What car has three L logos?

The car with three L logos is Lifan Motors. Here is some extended information about Lifan Motors: 1. Introduction: Lifan Motors is an automobile manufacturing company headquartered in Chongqing Automobile Park. Innovation, export, and good reputation are the company's business philosophies. It has 7 overseas automobile manufacturing bases and nearly 500 marketing networks worldwide. Its main products include the Lifan 520, Lifan 530, and Lifan X50. 2. Advantages: Lifan also has 7 overseas automobile manufacturing bases around the world and nearly 500 marketing networks globally. This not only reflects the company's globalization strategy but also serves as the foundation for improving Lifan Motors' global services, marking a new starting point for the company's export strategy. Looking ahead, with the comprehensive development of the "five major systems"—marketing, products, after-sales service, spare parts, and finance—Lifan Motors will increase investment and determination to accelerate its development in overseas markets. While maintaining its position as a "leader in exports," the company will strive to achieve a new transformation from "going global" to "internationalization."
10
2
Share

What does it mean when the EPC light is on?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test or under other circumstances. The power-on self-test is a pre-driving check that monitors all vehicle sensors. Typically, if the engine is not started after powering on, the light will turn off by itself after about 3 seconds. If the EPC light remains on after starting the vehicle or illuminates under other conditions, the possible causes include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light will activate if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, triggering the light. Fuel system fault: Issues such as substandard fuel, degraded fuel, or poor fuel atomization can cause the light to come on. Engine fault: Insufficient engine pressure or problems with components like the intake valves can also prompt the EPC light. ECU control unit fault: Interference with the vehicle's computer signals or false alarms from the computer can lead to illumination. Brake light fault: Malfunctions like non-functional brake lights, faulty brake switches, or brake wiring issues can trigger the EPC light. Solutions for when the EPC light is on: Troubleshoot the intake system, use fuel with the appropriate octane rating, and clean the throttle body. Remove carbon deposits from relevant components. Re-flash the ECU with updated data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains. If it doesn't, the issue might have been temporary. If the light stays on or frequently illuminates, it's advisable to drive to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system will take predefined actions to address powertrain issues. The EPC indicator light typically appears in two colors: yellow and red. A yellow EPC light indicates a fault, but the vehicle can still be driven cautiously to a repair shop. A red EPC light signifies a more severe issue, requiring immediate parking and contacting a professional for repairs. Continuing to drive with a red EPC light can damage core components or compromise safety.
7
3
Share

What is the Engine Start-Stop Button?

The engine start-stop indicator button features a circle with an 'A' inside and the letters 'OFF' below it. Here is additional information about the start-stop function: 1. Purpose: The automatic start-stop function automatically shuts off the engine when the vehicle comes to a stop and restarts it when the clutch is pressed, saving time. 2. Working Principle: The start-stop system operates as follows: when the vehicle stops due to traffic or at an intersection, the driver can press the brake pedal and shift to neutral. The Start/Stop system then automatically checks conditions such as the engine idling without gear engaged, wheel speed sensors from the anti-lock system showing zero, and the electronic battery sensor indicating sufficient energy for a restart. The entire process occurs while the transmission remains in Drive (D) mode.
14
4
Share

When is the time to collect the annual inspection sticker?

According to the new regulations, family-use small cars are exempt from on-site inspection for 6 years, but within those 6 years, you still need to collect the annual inspection sticker and environmental protection sticker from the vehicle management office every 2 years. Here is some extended information about motor vehicle annual inspections: 1. Legal basis: Article 32 of the "Motor Vehicle Registration Regulations" stipulates that the owner of a motor vehicle can apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. 2. Consequences of not inspecting: If a vehicle that has not undergone the annual inspection continues to be driven on the road, it will be subject to a fine and a three-point penalty, and the vehicle will also be impounded. 3. Advance time: The annual inspection of a motor vehicle can be conducted up to three months before the expiration of the driving license. It is best to do it two months or a little over one month in advance, and not wait until there are only a few days left before the inspection expires.
4
4
Share

What Are the Reasons for a Car Not Starting Even When the Battery Has Power?

There are many reasons why a car won't start even when the battery has power. Here is a detailed analysis and solution: 1. Wrong gear position: If the gear is in D (Drive) or R (Reverse), the car won't start. It will only start when the gear is in P (Park) or N (Neutral). 2. Out of fuel: The car won't start if it's out of fuel. 3. Fuel pump failure: If the starter motor runs normally but the car doesn't start, check the fuel lines. 4. Throttle body carbon buildup: Too much carbon buildup in the throttle body can also prevent the car from starting. In this case, slightly pressing the accelerator pedal may help start the engine.
10
2
Share

What are the items for vehicle annual inspection?

Vehicle annual inspection items include a comprehensive check of appearance inspection, exhaust emission test, window film light transmittance, and traffic violation checks. Here is additional information about vehicle annual inspection: 1. Regulations: If a vehicle's inspection is overdue by less than 3 months, you only need to go directly to make up for it, and usually, an oral warning will be given. 2. Notes: (1) Check if the insurance policy is correct, especially for the first annual inspection of a new car. If the information on the insurance policy does not match the actual situation, go to the insurance company to correct it. (2) If you need to replace the environmental protection label, go to the environmental protection bureau's auto repair shop in advance to complete the exhaust test to save time. (3) Go to the traffic team to clear traffic violations (this must be prioritized). (4) For the annual inspection, it's better to do it early rather than late. Inspections at the beginning of each month will be faster. (5) Remember to bring money, as the annual vehicle inspection is not free. (6) Bring all required materials to avoid being unable to apply for the inspection.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.