What to Do If Your Car Paint Gets Chipped by Someone Opening Their Door?

2 Answers
TaylorAnn
08/31/25 4:24am
Here are the solutions if your car paint gets chipped by someone opening their door: Preserve evidence such as taking photos or recording videos, which can be used to claim compensation from the other party. If negotiation fails, you can report the incident to the police and then proceed with an insurance claim. To prevent paint chipping during daily use, it is advisable to install anti-collision strips or stickers on your car doors. These can effectively protect the doors from paint damage. Below are the methods to address chipped car paint: Repair can be done based on the extent of the damage: If the chipped area is small and the primer is not exposed, simply clean the area and use a touch-up paint pen for repair. If the chipping is severe: Use ultra-fine sandpaper dipped in water to sand the chipped area in the same direction; After wiping it clean, apply primer and let it dry, then smooth it with sandpaper; Finally, use a touch-up paint pen for repair.
Was this review help?
3
3
Share
LeManuel
09/12/25 7:41am
I just encountered a situation where my car door got chipped last week! I had just parked and gone into the store, only to come back and find a small paint chip on the door—it broke my heart. First, don’t panic. Immediately take photos and videos with your phone to document the damage and the surroundings, such as the license plates of nearby cars. If there are surveillance cameras or witnesses nearby, quickly ask if they can help verify what happened. If I can’t identify the responsible party, I usually file a complaint with the parking lot management or property management to see if I can claim compensation. For minor scratches, I handle them myself—I always keep a touch-up paint pen in the garage. Just follow the instructions: clean the area, fill in the chip, and lightly sand it down. Before the repair is fully done, I apply clear nail polish or car wax to seal it and prevent rust or further spreading. When parking, I always choose corner spots and avoid positioning my door too close to other cars. Since making this a habit, I’ve rarely had this issue again. Car paint maintenance is all about the details—you can’t afford to be careless.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

Does the Tiguan L380 Have a Particulate Filter?

The Tiguan L380 is equipped with a particulate filter. A particulate filter is a ceramic filter installed in the diesel engine's emission system, which captures particulate emissions before they enter the atmosphere. Functions of the Particulate Filter: The particulate filter can reduce the soot produced by the diesel engine by more than 90%. The captured particulate emissions are subsequently burned off during vehicle operation. To check whether a vehicle has a particulate filter, you can use the following three methods: 1. Refer to the and to see if there is a particulate filter function. Additionally, carefully check the fault codes in the manual to see if there is a "Particulate Filter" warning light indicator. 2. Check the label on the oil filler cap. If the oil cap clearly states 0W-20 grade oil, it indicates the presence of a particulate filter. 3. Look behind the three-way catalytic converter on the exhaust pipe for a cylindrical section. If present, that is the particulate filter.
1
3
Share

Do You Need to Wait for a Red Light When Making a U-Turn?

If the U-turn signal light is red, you must wait to make a U-turn; otherwise, it will be considered running a red light. According to the "Road Traffic Safety Law," this violation incurs a penalty of 6 demerit points and a fine of 200 RMB. If there is no dedicated U-turn signal light, and the gap is marked with a dashed line, the U-turn is not affected by the traffic light and does not require crossing the pedestrian crossing. However, if the gap is marked with a solid line, the U-turn must cross the pedestrian crossing and is subject to the left-turn signal light. Making a U-turn directly without following these rules may result in being photographed or penalized by on-site traffic police. When making a U-turn that requires crossing a pedestrian crossing, yielding to pedestrians is mandatory: 1. If pedestrians are walking on the right side of the crosswalk and have not reached the centerline of the road, vehicles on the left side must slow down and allow them to pass safely. 2. If pedestrians are waiting outside the boundary of the motorized and non-motorized lanes and have not entered the roadway, vehicles should slow down and let them pass safely. 3. If pedestrians have crossed the boundary between motorized and non-motorized lanes, failing to stop for them is a violation and punishable. 4. If pedestrians enter the motorized lane (Lane A) from the crosswalk, vehicles in Lane B must slow down and allow them to pass safely. Failing to stop for pedestrians in Lane A is a violation and punishable. 5. If pedestrians are waiting at the centerline of the road but have not entered the motorized lane, failing to stop for them is a violation and punishable. 6. If pedestrians cross the centerline and enter the motorized lane, failing to stop for them is a violation and punishable. 7. If the road is divided by a median with greenery, and pedestrians are waiting in the central stopping area, vehicles must slow down and allow them to pass safely. Permissible U-turn scenarios: 1. If an intersection has a U-turn sign, a U-turn is allowed. If there is a U-turn signal light, follow its instructions. If no signal light exists, make the U-turn without obstructing other vehicles or pedestrians. 2. If there is no explicit "No U-Turn" or "No Left Turn" sign at an intersection, a U-turn is allowed. The absence of such signs, along with no solid centerline, means you can proceed with the U-turn. 3. U-turns are also permitted in yellow grid zones. These zones are no-parking areas marked at intersections prone to congestion or near important facilities. While stopping in these zones is prohibited, making a U-turn is allowed unless a median barrier is present. 4. If a U-turn signal light is present, follow its instructions—only proceed on green. 5. If a "No Left Turn" sign coexists with a "U-Turn Permitted" sign, U-turns are allowed, but left turns are not. Note that "No U-Turn" and "No Left Turn" are not the same. Key considerations when making a U-turn: 1. Observe road markings—if a solid line is present, U-turns are prohibited under any circumstances. Continue driving to find a suitable location. 2. If a "No Left Turn" sign is posted, U-turns are also prohibited at that intersection, as U-turns inherently involve a left-turn maneuver. 3. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, a U-turn is not permitted. 4. Always yield to oncoming traffic when making a U-turn. Failing to do so may result in bearing full liability for any accidents. 5. Near intersection stop lines, lane arrows guide vehicle positioning. Not all leftmost lanes are for left turns—some may have straight arrows. Even if no explicit "No U-Turn" signs are present, U-turns are prohibited in such lanes.
18
2
Share

How to Remove Anti-Theft License Plate Screw Caps?

The method to remove anti-theft license plate screw caps is: Use a flathead screwdriver and a hammer. Insert the screwdriver into the seam and strike the head of the screwdriver with the hammer to remove it. License plate screw caps serve an anti-theft sealing function. The screws on license plates have anti-theft measures; if you want to remove the license plate, you can only destroy the anti-theft device. The first Chinese character on a vehicle license plate represents the abbreviation of the province or municipality directly under the central government. The uppercase letter following the Chinese character indicates the city or district. License plates are hard-coded number plates issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for license plates. Vehicle license plates are the legal certificates permitting cars to drive on the road.
7
2
Share

What kind of driver's license is required for a 6.2-meter car?

A 6.2-meter car requires an A1 driver's license. The main part of the driver's license records the motor vehicle driver's information, including name, gender, date of birth, nationality, address, ID number, motor vehicle driver's license number, and photo. The supplementary part of the license includes the initial issuance date, permitted vehicle type code, validity period, issuing authority seal, and file number. Requirements for obtaining an A1 driver's license: 1. Age condition: Applicants for large passenger vehicle licenses must be between 26 and 50 years old. 2. Height must be at least 155 cm, and vision must meet the requirement of at least 5.0 on the logarithmic visual acuity chart for both naked eyes or corrected vision.
11
5
Share

Comparison between Chevrolet Malibu XL and Superb

Comparison between Chevrolet Malibu XL and Superb: 1. Different manufacturers: The manufacturer of Chevrolet Malibu XL is SAIC-GM Chevrolet; The manufacturer of Superb is SAIC Volkswagen Skoda. 2. Different body structures: The body structure of Chevrolet Malibu XL is a sedan; The body structure of Superb is a hatchback. Taking the Malibu XL 2021 535T Automatic Ruixing Edition as an example, its body dimensions are 4933mm in length, 1854mm in width, and 1472mm in height, with a wheelbase of 2829mm. The body structure is a 4-door 5-seater sedan, with front-wheel drive and electric power steering.
1
1
Share

What is the difference between Wuling displacement E and S?

The difference between Wuling displacement E and S lies in their versions: Wuling displacement E is the basic version, while S is the standard version. Taking the Wuling Zhiguang 2020 1.2L Utility Model National VILS as an example, the vehicle has a length, width, and height of 3797 mm, 1510 mm, and 1820 mm respectively, with a wheelbase of 2500 mm and a fuel tank capacity of 38 liters. In terms of power, it is equipped with a 1.2-liter naturally aspirated engine, delivering a maximum power of 56 kW and a maximum torque of 108 Nm. For suspension, the front suspension of this model uses a MacPherson independent suspension, and the rear suspension employs a longitudinal leaf spring suspension.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.