What to Do If Your Car Is Scratched While Parked on the Side of the Road and the Culprit Cannot Be Found?

1 Answers
Jenna
07/30/25 10:56am
When encountering a situation where your car is scratched and the other party flees, you should quickly try to find the responsible party. Here are the detailed steps: 1. Check surrounding surveillance: If your car is scratched, first check if there are any surveillance cameras around where you parked, such as those at restaurants, shopping malls, or private residences. Generally, you can request to view the footage after explaining your situation. 2. Check your own dashcam: If your car is equipped with a dashcam, review the footage. If you capture the other party's license plate number, you can report it to the police. 3. Determine if the parking lot has compensation obligations: If your car was parked in a paid parking lot, communicate with the parking lot staff to see if they should compensate you, even if it's only a small amount. Parking lots usually have surveillance, and if the incident occurred there, the staff will likely assist in the investigation. 4. Report to the police for investigation: If your car is severely scratched and the other party flees, report it to the police immediately. The police can access traffic surveillance footage, which you do not have the authority to view yourself.
Was this review help?
16
1
Share
More Forum Discussions

Should High Beams Be Used on Highways?

High beams should be used on highways. When driving on highways, the speed is very fast, and most highways do not have streetlights, resulting in very poor visibility. If high beams are not turned on at this time, it becomes difficult to clearly see the road conditions ahead in a timely manner, which can easily lead to traffic accidents. Highways generally have barriers in the middle, separating lanes for one-way traffic. These barriers block the high beams while eliminating the danger of oncoming vehicles. It is permissible to use high beams when driving on highways at night. The purpose of using high beams is to allow the driver to more clearly assess the road conditions ahead, thereby reducing the likelihood of traffic accidents.
7
3
Share

What do the numbers at the back of an Audi mean?

Audi's rear numbers represent acceleration capability. Below are the 0-100 km/h acceleration values for conventional models and influencing factors: 0-100 km/h acceleration values for conventional models: Typically, 1.6L compact cars achieve 11 to 13 seconds, 2.0T midsize sedans range between 7 to 8 seconds, while supercars mostly accelerate in under 3.8 seconds. Factors affecting 0-100 km/h acceleration: The engine is the primary factor. Among vehicles with identical displacement, models equipped with turbocharged engines demonstrate significant advantages in 0-100 km/h acceleration due to their stronger power output and exceptionally wide maximum torque range, enabling maximum acceleration capability at very low RPMs.
18
2
Share

What Type of Engine Oil is Best for Jetta?

Jetta uses engine oil with the specification 5W-40. Below are the functions and characteristics of engine oil: Functions of engine oil: It lubricates and reduces friction in the engine, assists in cooling, seals against leaks, prevents rust and corrosion, and provides shock absorption. It is often referred to as the 'blood' of the car. Engine oil consists of base oil and additives. Characteristics of engine oil: Advanced technology can convert natural gas into crystal-clean full synthetic base oil, to which unique power cleaning technology is added, creating lubricants with superior cleaning and protective performance. Under such harsh operating conditions, only qualified lubricants can reduce wear on engine components and extend their service life.
5
0
Share

The Pros and Cons of Gas-to-NG Vehicle Conversion

Below is a detailed analysis of the pros and cons of gas-to-NG vehicle conversion: Advantages: More economical: Natural gas prices are relatively low, making the cost per mile for gas-powered vehicles lower than that of fuel-powered vehicles. More environmentally friendly: Compared to fuel, natural gas produces significantly less pollution from production to transportation and final usage, making it much more eco-friendly. Disadvantages: Lower range and reduced power: Due to the gaseous nature of natural gas combustion, its expansion and work capacity are inferior to gasoline, resulting in a noticeable decrease in engine power compared to using gasoline. Additionally, natural gas vehicles carry less fuel, leading to shorter driving ranges than fuel-powered vehicles. Space consumption and extra weight.
7
1
Share

What is the actual fuel consumption of the Suzuki GW250?

GW250 has a fuel consumption of around 3.5 liters per 100 kilometers. The actual fuel consumption depends on the vehicle's condition, road conditions, and the rider's driving skills. The fuel consumption level of this motorcycle varies among different riders, mainly influenced by driving habits and road conditions. The comprehensive fuel consumption of this motorcycle is basically around 3.5L per 100 kilometers. Here is some extended information: Introduction: The Haojue Suzuki GW250 is a compact street motorcycle. Currently, the civilian version of this model has two variants: GW250 and GW250F. Advantages: The main advantages of this motorcycle lie in its decent power performance and exceptionally high overall stability. Due to these characteristics, it is affectionately referred to by riders as the 'National God Motorcycle'.
18
1
Share

What is the difference between Toyota Land Cruiser and Prado?

The differences between Toyota Prado and Toyota Land Cruiser include different exterior dimensions, different engines, and different maximum torque. The following are the specific details: Different exterior dimensions: Toyota Prado measures 4840×1885×1890 (L×W×H in mm). Toyota Land Cruiser measures 4795×1835×1925 (L×W×H in mm). Different engines: Toyota Prado is equipped with a 206kW (3.5L naturally aspirated) engine. Toyota Land Cruiser is equipped with a 110kW (2.7L naturally aspirated) engine. Different maximum torque: Toyota Prado has a maximum torque of 365Nm at 4500rpm. Toyota Land Cruiser has a maximum torque of 217Nm at 3000-4000rpm.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.