What to Do If Your Car Has a Flat Tire on the Road?

1 Answers
DeTyler
07/29/25 9:20pm
First, be sure to turn on the hazard lights and place a warning triangle behind the car (250 meters at night on highways, 150 meters during the day on highways, 50 meters during the day on regular roads, and 150 meters at night) to alert oncoming vehicles to take caution and avoid the area. At the same time, all passengers should exit the vehicle and move to a safe location to prevent secondary accidents. Then, call the highway rescue hotline at 12122, or you can replace the spare tire yourself and drive to the nearest repair shop. To prevent flat tires, the following measures should be taken: 1. Check tire pressure: Before setting off, carefully inspect the tire pressure for any abnormalities, check for damage on the tread, bulges on the sidewalls, and the extent of tire wear, among other tire-related conditions. 2. Avoid speeding and overloading: While driving, strictly avoid speeding and overloading to prevent tire blowouts caused by excessive tire load. 3. Prevent fatigue driving: For long-distance trips, avoid driving for extended periods without breaks. Take a short rest every 2-4 hours by pulling into a service area to prevent fatigue driving and overheating of the tires, which can lead to blowouts.
Was this review help?
19
5
Share
More Forum Discussions

What Causes the BYD Display Screen Not to Light Up?

The BYD navigation display screen not lighting up is most likely due to poor line contact. It is necessary to promptly check whether there is a loose connection in the circuit. If present, it can cause the central control screen to go black. In this case, simply reconnecting the loose parts properly will resolve the issue. Here is some related information about the BYD Surui: 1. Exterior: The design is stylish and elegant, with the front face featuring a dual-chrome strip design that integrates seamlessly with the lens-style headlights. The LED taillight cluster, embedded like a ruby, perfectly connects with the waistline that runs from front to rear. 2. Interior: The Surui's black and beige dual-tone interior is harmoniously matched, with the glossy piano black finish exuding a refined and delicate texture.
6
3
Share

How to prevent theft of external tire pressure monitors?

External tire pressure monitors mainly rely on anti-theft nuts for theft prevention. Here are the relevant details: 1. External tire pressure monitoring: The tire pressure monitoring system is an active safety device that primarily monitors vehicle tire pressure. It provides timely alerts when tires show dangerous signs, prompting drivers to take appropriate actions to prevent serious accidents. External tire pressure monitors are screwed onto the valve stem and measure tire pressure by blocking the valve pin. 2. Advantages of external tire pressure monitors: The main advantage of external types is their convenient and effortless installation, as they can be directly attached to the valve. If you use your car for daily commuting, have a private parking garage with good security conditions, and possess some DIY skills, then choosing an external tire pressure monitor is both cost-effective and convenient.
2
5
Share

Can I get my driver's license in one month now?

Generally, it's not possible to complete the driver's license test within one month due to the issue of accumulating required training hours. Typically, it takes about three months, and the shortest time would be around two months, provided that you pass each test on the first attempt. 1. Subject 1: Getting a driver's license is both simple and challenging. It's simple because the test content is fixed, and Subject 1 is theoretical. 2. Subject 2: Tests include reverse parking, starting on a slope, S-curve driving, right-angle turns, and parallel parking. 3. Subject 3: Tests road driving skills, such as turning left or right, changing lanes, overtaking, and shifting gears. 4. Subject 4: Also theoretical; it may sound easy, but various situations can arise during the actual process.
18
5
Share

What Causes Volvo Steering System Malfunctions?

There are several possible causes for Volvo steering system malfunctions: 1. Abnormal noises during steering. This may be caused by damage to the kingpin and bushings or failure of the column thrust bearing. You can turn left and right to identify the source of the noise before disassembling for inspection. 2. Steering gear oil leakage. Leakage typically occurs at three locations: the steering gear upper cover, the connection between the steering shaft and the pitman arm, and the side end cover. This is usually caused by deteriorated seals due to prolonged vehicle use. Since these areas all have sealing rings, replacing the oil seals and gaskets should resolve the issue. For leaks at other locations, it might indicate sand holes or cracks in the steering gear housing. Small gaps can be sealed with Loctite 290 high-permeability sealant, while larger gaps require component replacement. 3. Difficulty in steering wheel return. This issue usually stems from mechanical parts of the steering system, such as lack of lubrication causing damage to the steering knuckle kingpin and bushings, insufficient lubrication in the universal joint connecting the steering wheel and gear, or rusted tie rod ends - all requiring maintenance. 4. Heavy steering. Possible causes include steering gear failure, power steering pump malfunction, low fluid level, air in the system, failed seal rings in the two limit valves (causing fluid communication between piston chambers and loss of power assistance), or clogged return filter in the reservoir - all requiring troubleshooting and repair. 5. Power steering pump leakage. The first scenario involves leakage from the pump's rear cover due to damaged seal rings. The second, less noticeable situation shows as constantly decreasing fluid level in the steering reservoir requiring frequent refills.
10
1
Share

Why is the car air conditioning not cooling enough?

The reasons why the car air conditioning is not cooling enough are as follows: 1. Refrigerant leakage: The main reason is insufficient refrigerant or leakage. The refrigerant in the air conditioning system generally does not get consumed. It may become insufficient due to accidents or disassembly of air conditioning pipelines and other components, which affects the sealing. Therefore, if the refrigerant is found to be insufficient, check the pipelines for leaks first. 2. Condenser cooling failure: The condenser is usually located at the front of the engine compartment. While driving, factors such as wind resistance may cause condenser failure, reducing its cooling performance and affecting the air conditioning's refrigeration. 3. Blocked ventilation ducts or dirty air conditioning pipes: The role of the air filter is to prevent dust from entering the car. After prolonged operation, it may become blocked, affecting the air volume of the air conditioning. Even when the air conditioning is set to the highest level, the cooling effect remains poor, and there may be noticeable noise.
19
2
Share

Why is the transmission warning light constantly on?

The reasons for a constantly illuminated transmission warning light are as follows: 1. Electronic component failure: Sporadic or persistent malfunctions in the automatic transmission's electronic components (sensors, solenoids, control module). 2. Mechanical failure: Mechanical issues in automatic transmission models, such as engine racing or transmission slippage - after such severe transmission problems occur, the transmission control unit will activate fault alerts and illuminate the warning light. 3. Overheating transmission fluid: The warning light may illuminate due to excessively high transmission fluid temperature, which can be caused by overfilling transmission fluid or internal/external blockages in the transmission cooler (these situations mostly occur during high-temperature seasons).
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.